LOOP Loop Industries Inc

United States

Securities and Exchange Commission

Washington, D.C. 20549

FORM 10-K

or

Commission File No. 000-54768

480 Fernand-Poitras Terrebonne, Québec, Canada J6Y 1Y4

(Address of principal executive offices zip code)

Registrant’s telephone number, including area code (450) 951-8555

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b).  ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

As at August 31, 2023, the last business day of the Registrant’s most recently completed second fiscal quarter, the aggregate market value of the voting common stock held by non-affiliates of the Registrant (without admitting that any person whose shares are not included in such calculation is an affiliate) was approximately $54,447,740. As at May 28, 2024, there were 47,538,745 shares of the Registrant’s common stock, par value $0.0001 per share, outstanding.

Documents incorporated by reference:

The information required by Items 10, 11, 12, 13 and 14 of Part III of this Annual Report on Form 10-K is incorporated herein by reference from the registrant's proxy statement to be filed with the Securities and Exchange Commission in connection with the solicitation of proxies for the registrant’s 2024 Annual Meeting of Stockholders.

LOOP INDUSTRIES, INC.

TABLE OF CONTENTS

CAUTIONARY STATEMENTS REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K of Loop Industries, Inc., a Nevada corporation (the “Company,” “Loop,” “we,” or “our”), contains “forward-looking statements,” as defined in the United States Private Securities Litigation Reform Act of 1995. In some cases, you can identify forward-looking statements by terminology such as “may,” “will,” “should,” “could,” “expects,” “plans,” “intends,” “anticipates,” “believes,” “estimates,” “predicts,” “potential,” or “continue,” or the negative of such terms and other comparable terminology. These forward-looking statements include, without limitation, statements about our market opportunity, our strategies, ability to improve and expand our capabilities, competition, expected activities and expenditures as we pursue our business plan, the adequacy of our available cash resources, regulatory compliance, plans for future growth and future operations, the size of our addressable market, market trends, and the effectiveness of the Company’s internal control over financial reporting. Although we believe that the expectations reflected in the forward-looking statements are reasonable, we cannot guarantee future results, levels of activity, performance, or achievements. Actual results may differ materially from the projections discussed in these forward-looking statements. The economic environment within which we operate could materially affect our actual results. Forward-looking statements are inherently subject to risks and uncertainties, some of which cannot be predicted or quantified. These risks and other factors include, but are not limited to, those listed under “Risk Factors.” Additional factors that could materially affect these forward-looking statements and/or projections include, among other things: (i) commercialization of our technology and products, (ii) our status of relationship with partners, (iii) development and protection of our intellectual property and products, (iv) industry competition, (v) our need for and ability to obtain additional funding relative to our current and future financial commitments, (vi) engineering, contracting, and building our manufacturing facilities, (vii) our ability to scale, manufacture, and sell our products in order to generate revenues, (viii) our proposed business model and our ability to execute thereon, (ix) the ability to obtain the necessary approvals or satisfy any closing conditions in respect of any of our proposed partnerships, (x) our joint venture projects and our ability to recover certain expenditures in connection therewith, (xi) adverse effects on the Company’s business and operations as a result of increased regulatory, media, or financial reporting scrutiny, practices, rumors, or otherwise, (xii) disease epidemics and other health-related concerns and crises, which could result in reduced access to capital markets, supply chain disruptions and scrutiny, embargoing of goods produced in affected areas, government-imposed mandatory business closures and any resulting furloughs of our employees, government employment subsidy programs, travel restrictions or the like to prevent the spread of disease, or market or other changes that could result in non-cash impairments of our intangible assets, and property, plant and equipment, (xiii) the effect of the continuing worldwide macroeconomic uncertainty and its impacts, including inflation, market volatility and fluctuations in foreign currency exchange and interest rates, (xiv) the outcome of any SEC investigations or class action litigation filed against us, (xv) our ability to hire and/or retain qualified employees and consultants, (xvi) other events or circumstances over which we have little or no control, and (xvii) other factors discussed in our subsequent filings with the Securities and Exchange Commission (the “SEC”).

Management has included projections and estimates in this Form 10-K, which are based primarily on management’s experience in the industry, assessments of our results of operations, discussions and negotiations with third parties, and a review of information filed by our competitors with the SEC or otherwise publicly available.

In addition, statements that “we believe” and similar statements reflect our beliefs and opinions on the relevant subject. These statements are based upon information available to us as at the date of this Annual Report on Form 10-K, and while we believe such information forms a reasonable basis for such statements, such information may be limited or incomplete, and should not be read to indicate that we have conducted an exhaustive inquiry into, or review of, all potentially available relevant information. These statements are inherently uncertain, and investors are cautioned not to unduly rely upon these statements.

We caution readers not to place undue reliance on any such forward-looking statements, which speak only as at the date made. We disclaim any obligation subsequently to revise any forward-looking statements to reflect events or circumstances after the date of such statements or to reflect the occurrence of anticipated or unanticipated events.

PART I

General

As used in this Annual Report on Form 10-K, the following terms are being provided so investors can better understand our business:

Depolymerization refers to the chemical process of breaking down a polymer molecule into its constituent monomers or smaller subunits. Depolymerization is the opposite of polymerization.

DMT is an acronym for dimethyl terephthalate, which is a monomer used in the production of polyethylene terephthalate (“PET”), as well as other products.

MEG is an acronym for monoethylene glycol, which is a monomer used in the production of PET, as well as other products.

Polymerization refers to a process of reacting monomer molecules together in a chemical reaction to form polymer chains or three-dimensional networks.

PET is an acronym for polyethylene terephthalate, which is a resin and a type of polyester showing excellent tensile and impact strength, chemical resistance, clarity, and processability, and reasonable thermal stability. PET is the material which is most commonly used for the production of polyester fiber and plastic packaging, including plastic bottles for water and carbonated soft drinks, containers for food and other consumer products; it is commonly identified by the number “1”, often inside an image of a triangle, on the packaging. PET is also used as a polyester fiber for a variety of applications including textiles, clothing and apparel.

rPET, rDMT and rMEG are acronyms for recycled PET, DMT and MEG.

All monetary amounts in this Annual Report on Form 10-K are in thousands of U.S. dollars unless otherwise specified, except for per share data.

Industry and Market Data

We obtained the industry and market data relating to our business included in this Annual Report on Form 10-K from our own internal estimates and research, as well as publications, research, surveys, and studies conducted by independent third parties not affiliated with us.

Industry publications, studies, and surveys generally state that they were prepared based on sources believed to be reliable, although there is no guarantee of accuracy. While we believe that each of these studies and publications is reliable, we have not independently verified the market and industry data provided by third-party sources. In addition, while we believe our internal research is reliable, not all such research has been verified by an independent source. We note that assumptions underlying industry and market data are subject to risks and uncertainties, including those discussed under “Cautionary Statements Regarding Forward-Looking Statements” and Item 1A. Risk Factors of this Annual Report on Form 10-K.

ITEM 1. BUSINESS

Overview

Loop is a technology company whose mission is to accelerate the world’s shift towards sustainable PET plastic and polyester fiber and away from the dependence on fossil fuels. Loop owns patented and proprietary technology that depolymerizes no and low-value waste PET plastic and polyester fiber (“Infinite Loop^™ Technology”), including plastic bottles and packaging, carpets and textiles of any color, transparency or condition and even ocean plastics that have been degraded by the sun and salt, to its base building blocks (monomers). The monomers are filtered, purified and polymerized to create virgin-quality Loop^™ branded PET resin suitable for use in food-grade packaging and polyester fiber, thus enabling our customers to meet their sustainability objectives. Loop is contributing to the global movement towards a circular economy by reducing and recovering plastic waste for a sustainable future.

We also intend to leverage the Infinite Loop^™ Technology to expand into specialty chemicals and polymers through a unique product offering of lower carbon footprint rDMT, rMEG and specialty polymers. Loop intends to produce and sell rDMT, rMEG and other specialty polymers directly to chemical companies as a simple drop-in supplement and circular alternative. We believe this expanded product portfolio will enable the Infinite Loop^™ Technology to reach new markets and cater to a broader range of customers across multiple industries including electronics, automotive, textile, cosmetics and packaging and other applications. This recent expansion in Loop’s product offering is non-reliant on green premiums or carbon and plastic credits, and we believe it addresses a global shortage in supply of DMT and high demand for low carbon MEG, and lowers capital intensity for commercial projects with the removal of polymerization equipment.

The Company is presently in the planning stages of pursuing the construction of Infinite Loop^™ commercial scale facilities. Loop is currently engaged in discussions to secure financing for its investments in the various planned manufacturing facilities and the sequencing of the manufacturing facilities will be determined in conjunction with the outcome of the Company’s financing discussions and discussions with our partners.

Background

Industry Background

We believe Loop’s depolymerization technology offers a complementary solution to mechanical recycling by enabling the use of a wider variety of PET feedstock, including complex and degraded plastics as well as polyester fiber, to produce virgin quality rPET with no degradation through continued recycling.

Mechanically recycled PET plastic is produced principally through the conversion of bales of PET bottles. The materials have been collected and transported to a materials recovery facility, where they are sorted from other materials, baled, and sent to specific PET recycling facilities. The bales are broken and sorted to remove any non-PET materials. The PET is then ground and put through a separation process which separates the PET from the bottle cap and label materials. Clean PET flake is then further processed depending on its intended end market. It may become more highly refined PET pellets for new bottles or extruded into PET sheet for clamshells, trays, and cups. Recycled PET is also spun into fiber for carpet, clothing, fiber fill, or other materials.

We believe mechanically recycled PET faces a number of challenges in meeting the quality specifications and growing volume requirements implied by commitments from major brands, mainly due to the cost and variety of acceptable PET feedstock. Some mechanical recycling processes involve remelting the PET flake which reduces the quality of the rPET output each time it is recycled relative to the specifications of virgin PET produced from fossil fuels. Each time PET plastic is mechanically recycled, its quality and clarity are reduced. Therefore, mechanically recycled PET may need to be mixed with virgin PET from fossil fuels to maintain quality. Lower quality mechanically recycled PET is often downcycled to alternate uses such as polyester fibers which may be dyed and used in carpets or clothing. Additionally, mechanically recycled PET manufactured for use in clear bottles or food containers requires predominantly clear and clean PET flakes separated from waste bales, and cannot accommodate colored or opaque PET flakes, lower quality fiber feedstock, or materially contaminated feedstock, which may be cheaper.

Depolymerization is a process in which plastics are broken down into their constituent molecules through chemical reactions, rather than being physically melted down and reprocessed as in mechanical recycling. This approach, which we utilize, has several advantages over mechanical recycling, which can have limitations due to the complexity and diversity of plastics.

One of the main limitations of mechanical recycling is that it is difficult to recycle plastics that have been contaminated or degraded. For example, if a plastic container has been exposed to heat or sunlight, it may become brittle and prone to breaking during the recycling process. Another limitation of mechanical recycling is that it is difficult to recycle certain types of plastics, such as multi-layered or composite plastics. These plastics are often used in food packaging or other products that require specialized properties like barrier protection or insulation. Depolymerization, however, can break down these degraded or complex plastics into their constituent molecules, which can then be purified and used to create new products.

Loop’s depolymerization technology has the potential to create a closed-loop system for plastic waste, whereby plastics can be recycled an infinite number of times without degrading the quality of the material. This is because the constituent molecules can be broken down and reassembled without losing their original properties, which can reduce the need for new plastics to be produced.

We believe Loop’s depolymerization technology offers a promising solution to the limitations of mechanical recycling by enabling the recirculation of more diverse and complex plastics, reducing waste and pollution, and creating a closed-loop system for plastic waste.

Our depolymerization technology breaks down waste PET into DMT and MEG. The monomers are purified and then recombined into virgin quality PET plastic and polyester fiber. We use low value PET plastic and polyester fiber waste as feedstock. Our technology can process PET plastic bottles and packaging of any color, transparency or condition, carpet, clothing and other polyester textiles that may contain colors, dyes, or additives, and even PET plastics that have been recovered from the ocean and degraded by exposure to sun and salt. We believe that our ability to use many materials that mechanical recyclers cannot process is an important advantage of Loop^™ PET resin and further expands the range of PET waste streams that may be recycled. This also means we are creating a new market for materials that have persistently been leaking out of the waste management system and into shared rivers, oceans and natural areas.

Currently, the DMT market is largely dominated by few key players, leaving limited options for customers and high market concentration. Additionally, the market is experiencing a global shortage of DMT, amplifying market challenges and creating a pressing need for alternative sources. The introduction of Loop’s rDMT has the potential to shift the market dynamic by offering a sustainable alternative to traditional DMT produced from fossil fuels.

In parallel, low-carbon MEG is in high demand and customers are increasingly seeking alternative solutions, but market options are limited and costly. As sustainability concerns intensify and regulatory pressures mount, the demand for low carbon MEG solutions is expected to continue to grow. Loop’s rMEG has the potential to address a gap in the market and help fulfill customers’ needs by offering a lower carbon footprint recycled alternative to the current market options for MEG.

Strategic partnership with Ester Industries Ltd. (“Ester”)

On May 1, 2024 Loop entered into an agreement with Ester, one of India's leading manufacturers of polyester films and specialty polymers, to form a 50/50 India joint venture (“India JV”). The purpose of the India JV is to build and operate an Infinite Loop^™ manufacturing facility in India which will produce a unique product offering of lower carbon footprint rDMT, rMEG and specialty polymers, using the Infinite Loop^™ Technology.

Loop and Ester have a well-established working relationship, with Ester producing Loop^™ PET using monomers produced at Loop’s Terrebonne Facility for global brand companies over the last four years. The India JV intends to leverage the complementary skill set of each partner by combining Loop's innovative technology and well-established global customer relationships with Ester's nearly 40 years of specialized polymer production, operational proficiency, and local expertise, including sourcing of PET plastic and polyester fiber waste feedstocks.

The Infinite Loop^™ India facility is expected to produce 70,000 tonnes of rDMT and 23,000 tonnes of rMEG annually and Ester will toll convert the rDMT and rMEG into various grades of specialty polymers, offering chemical companies a simple drop-in supplement and circular alternative.

The rDMT and rMEG product offerings expected to be manufactured at the Infinite Loop^™ India facility represent a strategic product expansion in a low-cost manufacturing environment which we believe complements Loop's existing PET plastic and polyester fiber manufacturing business and will fuel growth by addressing the large and growing demand in the market. We believe this expansion will enable the Infinite Loop^™ Technology to reach new markets and cater to a broader range of customers across multiple industries including electronics, automotive, textile, cosmetics and packaging.

The India facility will leverage the Infinite Loop^™ Technology and existing engineering package which should accelerate the lead-time towards groundbreaking, expected to occur by end of 2024. Feedstock sourcing for the facility, in which there is abundant supply from textile waste in India, is well advanced and the partners have engaged an external firm to source and secure the land for the facility. Construction is expected to be completed by the end of 2026, with commercial operations commencing in early 2027.

We believe the India JV offers attractive projected economic returns without the need for substantial sustainability-linked premium pricing. Loop and Ester anticipate that initial funding required to finance the India JV for the purposes of construction, development and operationalization of the project along with initial working capital requirements for the business is expected to be $165 million. Ester and Loop will each contribute 50% of the initial equity capital of the India JV.

Subject to the terms of the relevant governing documents, Ester will be the exclusive producer of specialty polymers for the India JV, and Loop will be the exclusive seller and marketing agent of the India JV’s products. Ester and Loop will work in collaboration on all financing activities for the India JV pursuant to the terms of the agreement.

Loop and Ester will also enter into (i) a technology license agreement with Loop (the “Loop Technology License Agreement”), (ii) a service agreement with Ester, and (iii) a sales and marketing agreement with Loop, each on terms to be mutually agreed upon by the parties. Pursuant to the Loop Technology License Agreement, the India JV will be granted an exclusive, subject to certain exceptions, license to exploit the Infinite Loop^™ Technology in India at a royalty rate to be set forth in the Loop Technology License Agreement.

Strategic Partnership with SK Geo Centric (“SKGC”)

In June 2021, Loop and SKGC concluded a definitive agreement for SKGC to become a strategic investor in Loop, with SKGC acquiring a 10% stake in Loop at $12.00 per share for a total of $56.5 million. The transaction, which closed in July 2021, also included warrants for SKGC to purchase Loop common stock at $15.00 and $20.00 per share. Concurrent with the strategic investment, Loop and SKGC entered into a memorandum of understanding (“MOU”) to form a joint venture with exclusivity to build sustainable PET plastic and polyester fiber manufacturing facilities throughout Asia.

In July 2021, in connection with the closing of the transaction, Loop entered into an Investor Rights Agreement with SK global chemical Co., Ltd. (the “Purchaser”) and Daniel Solomita (the “Investor Rights Agreement”), which provides for, among other things, customary resale shelf registration rights for the Purchaser that require Loop to file with the SEC a registration statement on Form S-3 covering the resale of the Loop common stock held by the Purchaser within 90 days after the second anniversary of the closing of the transaction. Loop intends to file such registration statement following the filing of this Annual Report on Form 10-K. 

SKGC is a global chemical company and member of the SK Group, one of South Korea’s largest conglomerates. SKGC is a general energy and chemical leader in the global market and is growing into a technology-based global chemical company through continuous research and development efforts. SKGC aims to achieve its “Green for Better Life” vision by establishing a plastics based circular economy through collaboration with various partners and stakeholders, such as Loop.

Asia represents approximately 60% of the world’s population and 70% of global PET consumption and is the main hub for the polyester fiber supply chain for textiles. The Asian market represents a prime opportunity for Loop’s growth and commercialization of its technology. SKGC is well established with a deep understanding of the Asian market, and vast expertise in building and operating large-scale petrochemical facilities, making them a uniquely well-suited partner for Loop in helping to ensure the successful commercialization of Loop’s technology in this market.

On April 27, 2023, Loop and SKGC entered into a joint venture agreement (the “JV Agreement”) to deploy Loop’s depolymerization technology in the Asian market through multiple commercial manufacturing facilities. Pursuant to the JV Agreement, Loop and SKGC agreed to form a new company (the “JV Company”), which will be headquartered in Singapore. SKGC will contribute 51% and Loop will contribute 49% of the initial equity capital of the JV Company. The JV Agreement outlines that the JV Company will have exclusive rights to commercialize Loop’s technology to produce rPET in the Asian market and Loop will receive an annual royalty fee for each of the commercial plants.

The planned Infinite Loop^™ commercial manufacturing facility in Ulsan, South Korea, is expected to have an annual capacity to supply up to 70,000 metric tons per year of Loop^™ PET resin for packaging and polyester fiber applications, and was planned to break ground in the first half of 2024. The timing of the facility is currently under review by the partners while they evaluate opportunities to reduce capital costs and carry out discussions with the Korean government for subsidies related to the facility. Loop and SKGC are also evaluating the opportunity to build a monomer facility in order to capitalize on the large and growing market and attractive economics for DMT and MEG, including lower capital investment requirements for such a facility.

In addition to Infinite Loop^™ Ulsan, the two partners have outlined plans which target a minimum of three additional commercial manufacturing facilities to be constructed throughout Asia by 2030. Loop and SKGC have partnered with SK ecoengineering, a subsidiary of the SK Group that brings considerable experience and proficiency as an EPC contractor, for the engineering and construction of the manufacturing facilities.

The planned facility in Asia will be part of SKGC’s Ulsan Advanced Recycling Cluster (“Ulsan ARC”) in South Korea. Daniel Solomita, Loop’s Founder and CEO, participated in the groundbreaking ceremony of the Ulsan ARC which took place on November 15, 2023 in South Korea. Mr. Solomita presented the Company’s sustainable plastics technology and its Infinite Loop^™ manufacturing model at the event, which included attendees ranging from central and local government officials, industry officials, environmental institutions, academic experts, customers and media.

Infinite Loop^™ Europe

We announced on September 10, 2020 a strategic partnership with SUEZ Group (“Suez”), with the objective to build the first Infinite Loop^™ manufacturing facility in Europe. On June 16, 2022, Loop, together with Suez and SKGC, announced that the three companies will become equal participants in the strategic partnership.

The expanded partnership intends to combine SKGC’s petrochemical manufacturing experience with Suez's resource management expertise and Loop’s breakthrough proprietary technology to supply up to 70,000 M/T of virgin quality, 100% recycled PET plastic and polyester fiber to the European market. The planned Infinite Loop^™ facility will offer a solution to consumer goods companies which have committed to goals for significantly increased use of recycled content in their products and/or packaging and help to meet the growing demand for recycled PET resin and polyester fiber.

On February 16, 2023, the three companies announced that the Chemesis industrial platform in Saint-Avold, located in the Grand Est region of France, has been selected as the site for their planned manufacturing facility in Europe. We are working with our partners Suez and SKGC on acquiring the project site, alignment of various levels of government support and additional steps for the project which include advancing permitting, site specific engineering, customer offtake contracts, feedstock and financing. In the quarter ended February 29, 2024, the company recorded expenses of $0.50 million in relation to preliminary project costs.

Memorandum of Understanding (“MOU”) with Reed Management SAS (“Reed”)

On January 16, 2024, Loop announced that it had signed a non-binding MOU with Reed, a newly-formed European investment firm focused on high impact and technology-enabled infrastructure. Pursuant to the MOU, Loop and Reed intend to form a strategic long-term partnership through the establishment of a 50/50 joint venture to commercialize Loop’s technology in Europe and for Reed to provide financing which would be utilized to fund the global commercialization of the Infinite Loop™ Technology (the “Proposed Transaction”). Since the signing of the MOU, Reed has invested significant resources in undertaking and completing extensive operational, technical, ESG, and legal due diligence. Loop and Reed continue to negotiate binding agreements with respect to the Proposed Transaction, and each party continues to work towards obtaining financing to fulfill its funding obligations with respect to the Proposed Transaction. The Company understands from Reed that its funding negotiations are progressing well and that it now expects to obtain its required funding via a transformative transaction, which by its nature has been a more extensive process than previously contemplated and which would also require regulatory approval. While entry into binding agreements would remain subject to the satisfaction of certain closing conditions, Loop and Reed are hopeful that they will enter into such binding agreements imminently, and close the Proposed Transaction by the end of the second quarter of the fiscal year ending February 28, 2025.

Loop^™ Branded PET Resin Compliant for Pharmaceutical Industry Packaging Applications

On December 13, 2023, Loop announced that its Loop™ branded PET resin has been tested and is compliant for use in packaging applications in the pharmaceutical industry. The rigorous requirements and standards outlined by the United States Pharmacopeia (USP <661.1>, Plastic Materials of Construction) and the European Pharmacopeia (Ph.Eur. 3.1.15, Polyethylene Terephthalate for Containers for Preparations not for Parenteral Uses) ensure that materials used in pharmaceutical packaging maintain the highest levels of integrity and do not compromise the safety and efficacy of the enclosed products. Test results executed by a worldwide leader in laboratory testing services confirm that Loop's PET resin has successfully met these requirements, opening new possibilities for sustainable packaging solutions in the pharmaceutical industry.

The pharmaceutical industry is increasingly recognizing the importance of adopting sustainable practices and materials to reduce its environmental impact. Loop's 100% recycled virgin quality PET can help support pharmaceutical companies with a sustainable packaging alternative and address the growing demand for environmentally responsible choices in the industry.

Supply Agreements with Global Consumer Brands

In the past years, we have seen major consumer brands make significant commitments to close the loop on their plastic use by transitioning their packaging to recyclable materials like PET, and by incorporating more recycled content into their packaging. We believe Loop^™ PET resin provides the ideal solution for these brands because it is recyclable and is made from 100% recycled PET waste and polyester fiber, while being virgin-quality and suitable for use in food-grade packaging, packaging applications in the pharmaceutical industry, and polyester fiber.

Due to the commitments by large global consumer brands to incorporate more recycled content into their product packaging, the regulatory requirements for minimum recycled content in packaging imposed by governments, the virgin-quality of Loop^™ branded PET resin and its marketability to enhance the sustainability credentials of consumer brands that incorporate it, we believe we will be able to sell Loop^™ branded PET resin at a premium price relative to virgin and mechanically recycled PET resin.

We currently have agreements with some of the world’s leading brands to be supplied from our planned commercial facilities, including:

We also have a signed letter of intent with On AG, a sportswear brand and subsidiary of On Holding AG, to secure volumes of Loop^™ PET resin from the planned Asian Infinite Loop^™ manufacturing facility in Ulsan, South Korea, which Loop is planning to construct with its strategic partner SKGC.

We are pursuing amended supply agreements with existing customers and new agreements with additional customers that are located in North America, Europe, and Asia to sell the production volumes of our planned Infinite Loop^™ commercial facilities.

Product activations with evian, L’Occitane, On AG, and Garnier

Loop has collaborated with multiple customers in recent and upcoming launches for products and product packaging incorporating Loop^™ PET manufactured from monomers produced at Loop’s small-scale production facility in Terrebonne, Québec (the “Terrebonne Facility”).

In 2021, Loop, in partnership with iconic global beverage brand evian, unveiled a new “evian Loop” prototype virgin-quality water bottle made from 100% recycled content. The monomers used to produce the evian Loop bottles were made at the Terrebonne Facility. Evian began selling water bottles made from Loop^™ PET in South Korea in October 2022. The waste plastic used to produce these bottles includes polyester fibers from carpets and clothing which are considered unrecyclable and destined for landfill and other natural environments. This initiative reflects evian’s commitment to its stated goal for circularity and 100% recycled content by 2025.

On October 11, 2022, Loop and L’OCCITANE, a global manufacturer and retailer of sustainable beauty and wellness products, unveiled a new bottle for the brand’s Almond Shower Oil that was manufactured with 100% recycled Loop™ PET resin produced using monomers from Loop’s Terrebonne Facility. Loop has partnered with L’OCCITANE to help meet the brand’s sustainability goal of using 100% recycled PET in its bottles by 2025. In partnership with the brand, a pilot project was executed where the bottle (excluding cap and label) was produced using 100% recycled Loop™ PET resin and was successfully carried out on L’OCCITANE production lines. This initiative marks a significant step forward in the partnership between the two companies and sets the pathway to implement Loop’s technology across other products in the brand’s assortment. As part of this partnership with L’OCCITANE, Loop’s branding is featured prominently on the front of the packaging, with additional details speaking to Loop’s technology on the back label.

On April 19, 2023, Loop and Garnier, one of the world’s largest mass market beauty brands, launched the brand’s first Micellar Cleansing Water All-In-1 bottle made of Loop^™ PET produced using monomers from Loop’s Terrebonne Facility (excluding cap and label). The Loop logo, featured on the front of this packaging innovation, serves as an anchor to highlight Loop’s technology, the quality of materials and the bottle’s recyclability. The inclusion of Loop branding on the packaging strongly supports Garnier’s sustainability goals by promoting the infinitely recyclable potential of the product and brings awareness to PET plastic circularity. This packaging innovation will first be distributed in Garnier’s largest market, the US and the brand’s home market of France. 

We also entered into an agreement in May 2022 with On AG, the Swiss sportswear brand, to supply Loop^™ PET to be utilized in polyester fiber by the brand, pursuant to which Loop^™ PET resin was delivered in the year ended February 28, 2023.

Loop and On AG collaborated to launch the Cloudeasy Cyclon shoe which was unveiled on May 21^st, 2024. The upper of the Cloudeasy shoe is crafted with 100% recycled and infinitely recyclable yarn, using the Infinite Loop^™ Technology. On AG is the first footwear company to launch a shoe using the Infinite Loop^™ Technology which enables fiber-to-fiber recycling. The Cloudeasy Cyclon shoe is part of On AG’s monthly subscription service Cyclon^™ where customers receive, wear, and then return Cylon^™ products, which are then recycled.

Loop continues to pursue opportunities for new activations and marketing campaigns with additional consumer goods brand companies.

Terrebonne Facility

As part of our plan for the commercialization of future Infinite Loop^™ manufacturing facilities, we enhanced our Terrebonne, Québec pilot plant to become a small-scale PET depolymerization production facility, incorporating all key pieces of depolymerization equipment that will be used in the full-scale commercial facilities. In addition to our research and development activities, this facility is used to deliver initial production volumes to support co-branded market launch campaigns with partners and customers and will also be used to showcase the Infinite Loop^™ end-to-end technology and train operational teams in advance of the commissioning of the planned Infinite Loop^™ full-scale commercial facilities.

We believe that the Terrebonne Facility has achieved its primary purpose of demonstrating that Loop’s breakthrough depolymerization technology is scalable and producing commercial quantities of virgin quality PET resin and polyester fiber for global brands.

In the year ended February 29, 2024, Loop reported revenues of $0.15 million from the sale of Loop™ PET resin produced from monomers manufactured at the Terrebonne Facility to several global consumer brands, including those with whom Loop is collaborating on product launches. In addition to supplying customers with initial volumes of Loop^™ PET, the Terrebonne Facility continues to support our customers and partners with research and development and analytical capabilities.

Market Opportunity

The estimated global annual market demand for PET plastic and polyester fiber was approximately $182 billion in 2023, and the DMT and MEG specialty chemicals global market size is estimated at $28 billion and forecasted to grow at a 3.7% CAGR through 2033. We believe plastic pollution and climate change continue to be the most persistently covered environmental issues by media and local and global environmental non-governmental organizations. Some of the main concerns associated with PET are the greenhouse gas (“GHG”) emissions associated with its production from non-renewable hydrocarbons and the length of time it persists in landfills and the natural environment. There is an increasing demand for action to address the global plastic crisis, as evidenced by the March 2022 endorsement by 175 nations of a historic resolution at the UN Environmental Assembly to end plastic pollution and forge an international legally binding agreement by the end of 2024. In the last few years, governments in North America, Europe and Asia have been enacting and proposing laws and regulations mandating the use of minimum recycled content in packaging, which underlies the strength of this issue in the marketplace. Consumer brands are seeking a solution to their plastic challenge, and they are taking action. In recent years we have seen major brands make significant commitments to close the loop on their plastic packaging by transitioning their packaging to recyclable materials and by incorporating more recycled content into their packaging.

Global consumer packaged goods companies (“CPG companies”), apparel manufacturers, and retail brands have announced significant public commitments and targets to make the transition to a circular plastic economy, for example:

There is a growing regulatory and policy environment to encourage a reduction in the production of virgin fossil fuel-based plastic and for minimum recycled content in packaging imposed by various governments:

The growing regulatory environment combined with global consumer goods companies, apparel manufacturers, and retail brand commitments for 2025 and 2030 are expected to further increase the demand for rPET.

Closed-loop circularity and keeping materials within their own cycle (bottle-to-bottle and fiber-to-fiber) is gaining increasing attention as the focus on sustainability intensifies. Governments and regulators have considered or enacted heightened standards for recycled materials that discourage downcycling of bottles into polyester fiber. Additionally, it is becoming increasingly difficult to secure inventory of post-consumer bottles due to the increased demand from the bottle industry as they strive to achieve their own sustainability goals. A fiber-to-fiber recycling strategy addresses these problems and allows fashion brands and companies to secure volume and support the increasing demand of recycled polyester fiber in the textile industry.

We believe the commercialization plans of Loop^™ PET resin and polyester fiber may provide the ideal solution for global brands because Loop^™ PET resin and polyester fiber contains 100% recycled PET and polyester fiber content. The Loop^™ PET resin and polyester fiber is virgin-quality and is suitable for use in food-grade packaging. That means CPG companies will be able to market packaging made from a 100% recycled Loop^™ branded PET resin and polyester fiber.

Commercialization Strategy

Our objective is to achieve global expansion of the Infinite Loop^™ Technology through a mix of fully owned manufacturing facilities, strategic partnerships, and licensing agreements. We believe that industrial companies, some of which today may not be in the business of manufacturing DMT, MEG, PET resin, polyester fiber or other specialty polymers, will view involvement with Infinite Loop^™ projects as a significant growth opportunity, which may offer attractive economic returns either as Loop manufacturing partners or as licensees of the technology.

The Infinite Loop^™ Technology is the key pillar of our commercialization blueprint. We believe our technology is at the forefront of the global transition away from fossil fuels and petrochemicals and into the circular economy, where PET plastic and polyester fiber are produced by recycling waste plastic rather than depleting finite resources. The Infinite Loop^™ Technology allows for waste PET plastic and polyester fiber to be broken down into its base building blocks, monomers DMT and MEG, using Loop’s patented technology. Once the monomers are purified, they can be sold directly to chemical companies, used in the production of specialty polymers, or repolymerized into PET plastic or polyester fiber using INVISTA know how, which Loop licenses, and Chemtex Global Corporation’s engineering.  The INVISTA polymerization process and the associated designs are historically proven in the commercial production of PET resin and polyester fiber.

We have completed our basic design package for the Infinite Loop^™ full-scale manufacturing facilities. The engineering philosophy we have adopted is “design one, build many.” This approach allows for the basic design package to be used as the base engineering platform for all future geographical expansion. We believe this approach allows for quick execution, speed to market, and lends itself well to modular construction. The basic design package has a capacity of up to 70,000 M/T of rDMT and 23,000 M/T of rMEG, or 70,000 M/T of PET resin output per year. Permitting, site and regulatory considerations may impact plant capacity.

On May 1, 2024, we announced our strategic partnership with Ester to build and operate an Infinite Loop^™ manufacturing facility in India which will produce a unique product offering of lower carbon footprint rDMT, rMEG and specialty polymers, using the Infinite Loop^™ Technology. Loop has a well-established working relationship with Ester, which has nearly 40 years of specialized polymer production, operational proficiency, and local expertise, including sourcing of PET plastic and polyester fiber waste feedstocks. The rDMT and rMEG product offerings expected to be manufactured at the Infinite Loop^™ India facility represent a strategic product expansion in a low-cost manufacturing environment which we believe complements Loop's existing PET plastic and polyester fiber manufacturing business and will fuel growth by addressing the large and growing demand in the market. We believe this expansion will enable the Infinite Loop^™ Technology to reach new markets and cater to a broader range of customers across multiple industries including electronics, automotive, textile, cosmetics and packaging.

The India facility will leverage the Infinite Loop^™ Technology and existing engineering package which should accelerate the lead-time towards groundbreaking, expected to occur by end of 2024. Feedstock sourcing for the facility, in which there is abundant supply from textile waste in India, is well advanced and the partners have engaged an external firm to source and secure the land for the facility. Construction is expected to be completed by the end of 2026, with commercial operations commencing in early 2027. Loop will receive an annual technology license fee from the Infinite Loop^™ manufacturing facility in India.

We are also focused on our planned joint venture projects with SKGC in Asia and Europe to build and operate Infinite Loop^™ manufacturing facilities producing and selling Loop^™ PET resin and polyester fiber. These projects leverage SKGC’s engineering and operational infrastructure. In addition, the joint venture projects will provide Loop with an annual technology licensing fee. SKGC is committed to commercializing Loop’s technology as the underpinning of its sustainable plastics strategy. Loop is working collaboratively with SKGC to put in place a financing plan for the rollout of large-scale manufacturing in Asia and Europe, including the planned Asian manufacturing facility in Ulsan, South Korea.

The planned Infinite Loop^™ commercial manufacturing facility in Ulsan, South Korea, is expected to have an annual capacity to supply up to 70,000 metric tons per year of Loop^™ PET resin for packaging and polyester fiber applications, and was planned to break ground in the first half of 2024. The timing of the facility is currently under review by the partners while they evaluate opportunities to reduce capital costs and carry out discussions with the Korean government for subsidies related to the facility. Loop and SKGC are also evaluating the opportunity to build a monomer facility in order to capitalize on the large and growing market and attractive economics for DMT and MEG, including lower capital investment requirements for such a facility.

The global expansion plan for our technology will allow our customers, mostly comprised of CPG brand companies, apparel companies, and chemical companies, to integrate Loop^™ PET resin, polyester fiber, rDMT and rMEG into their products and packaging. As countries around the globe continue to increase sustainability targets and recycled content mandates, our customers are increasing the use of sustainably produced materials into their products.

Our market strategy is to assist global consumer goods brands in meeting their public sustainability commitments by offering co-branded packaging or polyester fibers that are made with Loop 100% recycled, virgin-quality MEG, DMT, PET or polyester fibers. We believe that Loop^™ recycled PET resin and polyester fiber could command premium pricing over virgin, petroleum-based PET resin and provide attractive economic returns. We are targeting multi-year take or pay offtake agreements for planned Infinite Loop^™ production. Factors under consideration in determining project economics include the feasibility design engineering and cost estimate work, timing and permitting of a facility, customer offtake demand, commitment terms, and feedstock sources, quality, availability, PET bale index pricing, logistics, and ramp up, among others.

The Company’s ability to move to the next stage of its strategic development and construct manufacturing plants is dependent on, among other factors, whether the Company can obtain the necessary financing through a combination of the issuance of debt, equity, and/or joint ventures, and/or government incentive programs and/or customers.

Recent developments

Strategic partnership with Ester

On May 1, 2024, Loop entered into an agreement with Ester, one of India's leading manufacturers of polyester films and specialty polymers, to form a 50/50 India joint venture ("India JV"). The purpose of the India JV is to build and operate an Infinite Loop^™ manufacturing facility in India which will produce a unique product offering of lower carbon footprint rDMT, rMEG and specialty polymers, using the Infinite Loop^™ Technology.

Loop and Ester have a well-established working relationship, with Ester producing Loop^™ PET using monomers produced at Loop’s Terrebonne Facility for global brand companies over the last four years. The India JV intends to leverage the complementary skill set of each partner by combining Loop's innovative technology and well-established global customer relationships with Ester's nearly 40 years of specialized polymer production, operational proficiency, and local expertise, including sourcing of PET plastic and polyester fiber waste feedstocks.

The Infinite Loop^™ India facility is expected to produce 70,000 tonnes of rDMT and 23,000 tonnes of rMEG annually and Ester will toll convert the rDMT and rMEG into various grades of specialty polymers, offering chemical companies a simple drop-in supplement and circular alternative.

The rDMT and rMEG product offerings expected to be manufactured at the Infinite Loop^™ India facility represent a strategic product expansion in a low-cost manufacturing environment which we believe complements Loop's existing PET plastic and polyester fiber manufacturing business and will fuel growth by addressing the large and growing demand in the market. We believe this expansion will enable the Infinite Loop^™ Technology to reach new markets and cater to a broader range of customers across multiple industries including the electronics, automotive, textile, cosmetics and packaging industries.

The India facility will leverage the Infinite Loop^™ Technology and existing engineering package which should accelerate the lead-time towards groundbreaking, expected to occur by end of this year. Feedstock sourcing for the facility, in which there is abundant supply from textile waste in India, is well advanced and the partners have engaged an external firm to source and secure the land for the facility. Construction is expected to be completed by the end of 2026, with commercial operations commencing in early 2027.

We believe the India JV offers attractive projected economic returns without the need for substantial sustainability-linked premium pricing. Loop and Ester anticipate that initial funding required to finance the India JV for the purposes of construction, development and operationalization of the project along with initial working capital requirements for the business is expected to be $165 million. Ester and Loop will each contribute 50% of the initial equity capital of the India JV.

Subject to the terms of the relevant governing documents, Ester will be the exclusive producer of specialty polymers for the India JV, and Loop will be the exclusive seller and marketing agent of the India JV’s products. Ester and Loop will work in collaboration on all financing activities for the India JV pursuant to the terms of the agreement.

Loop and Ester will also enter into (i) a technology license agreement with Loop (the “Loop Technology License Agreement”), (ii) a service agreement with Ester, and (iii) a sales and marketing agreement with Loop, each on terms to be mutually agreed upon by the parties. Pursuant to the Loop Technology License Agreement, the India JV will be granted an exclusive, subject to certain exceptions, license to exploit the Infinite Loop^™ Technology in India at a royalty rate to be set forth in the Loop Technology License Agreement.

Cloudeasy Cyclon shoe launch with On

Loop and On collaborated to launch the Cloudeasy Cyclon shoe which was unveiled on May 21^st, 2024. The upper of the Cloudeasy shoe is crafted with 100% recycled and infinitely recyclable yarn, using the Infinite Loop^™ Technology. On is the first footwear company to launch a shoe using the Infinite Loop^™ Technology which enables fiber-to-fiber recycling. The Cloudeasy Cyclon shoe is part of On’s monthly subscription service Cyclon^™ where customers receive, wear, and then return Cylon^™ products, which are then recycled.

Proprietary Technology and Intellectual Property

We believe the power of our technology lies in its ability to use post-industrial and post-consumer waste PET plastic and polyester fiber feedstocks, which could end up in landfills, rivers, oceans and natural areas, to create Loop^™ PET resin. We believe our technology can deliver high-purity profitable virgin-quality, 100% recycled PET resin suitable for use in food-grade packaging and polyester fiber.

Our Generation II technology (“GEN II”) is a methanolysis-based depolymerization technology that uses temperatures below 90 °C to depolymerize waste PET and polyester fiber. The low temperature offers several key advantages which the Company believes will improve its ability to commercialize the GEN II technology, including;

We believe that GEN II requires less energy and fewer resource inputs than conventional PET production processes. We also believe it is an environmentally sustainable method for producing virgin-quality food-grade PET plastic by decoupling PET manufacturing from the fossil fuel industry.

To independently validate that our GEN II technology can produce DMT and MEG monomers at mini-pilot and pilot scale, we commissioned Kemitek, a College Centre for Technology Transfer specialized in the fields of green chemistry and chemical process scale-up. Kemitek’s findings allowed them to confirm that our technology produces monomers that meet our purity specifications for the production of PET resin and polyester fiber. The complete Kemitek report was filed with the SEC by the Company on December 14, 2020.

Additionally, Loop’s strategic partners, Suez and Danone, among others, collectively engaged an independent, globally recognized third-party engineering firm to execute a thorough due diligence and technology validation report.  We believe the final report, which was communicated in May 2022, validated and reinforced the quality, effectiveness, and scalability of our technology. Our technology was further validated in March 2023, when Loop and SKGC announced the successful completion of the technical due diligence conducted by SKGC. Key parameters of Loop’s technology that were validated through SKGC’s comprehensive due diligence include the production yields, operational stability, quality of the output monomers and overall performance of Loop’s Terrebonne Facility. The technical due diligence validated that the PET resin and polyester fiber produced using Loop’s technology is of virgin quality. Our Gen II technology was most recently validated by independent advisors hired by Reed concurrent with their due diligence review performed in the context of Reed’s investment through our European partnership.

To protect our technology and intellectual property rights, we rely on a combination of patents, trademarks, trade secrets, confidentiality agreements and provisions as well as other contractual provisions to protect our proprietary rights, which are primarily our patents, brand names, product designs and marks.

The GEN II technology portfolio currently consists of four patent families:

Loop owns registrations for its trademarks in Cambodia, Canada, China, the European Union, Japan, Taiwan, the United Kingdom, Vietnam, and the U.S. Loop also has pending applications in Canada, China, South Korea, and the U.S.

Government Regulation and Approvals

As we seek to further develop and commercialize our technology, we will be subject to extensive and frequently developing federal, state, provincial and local laws and regulations. Compliance with current and future regulations, including food packaging regulations, could increase our operational costs.

Our operations require various governmental permits and approvals. We are in the process of obtaining all necessary permits and approvals for the operation of our business; however, any of these permits or approvals may be subject to denial, revocation or modification under various circumstances. Failure to obtain or comply with the conditions of permits and approvals or to have the necessary approvals in place may adversely affect our operations and may subject us to penalties. See “Risk Factors” below for additional information.

We believe that if we are successful in addressing food packaging regulations in various countries and economic regions, that the regulatory environment may provide Loop^™ PET resin a competitive advantage relative to mechanically recycled alternative resins and virgin PET.

Loop’s PET resin was subjected to independent testing by an external and certified laboratory, which confirmed the PET complies with FDA Regulation 21 CFR § 177.1630 on August 26, 2021, as well as EU Commission Regulation No 10/2011 on July 27, 2021. These results attest that Loop’s PET is safe for use in food-contact applications, including but not limited to bottled water, carbonated drinks and food trays. Demonstration of compliance with food-contact requirements follows the No Objection Letter (“NOL”) from the FDA previously granted to Loop in March 2021. The NOL confirms that Loop’s monomers can produce rPET of a purity suitable for food-contact use, provided it meets the applicable requirements of Title 21 of the Code of Federal Regulations. The monomers used in the PET resin submitted for testing were produced at the Terrebonne Facility.

We have received from the European Chemicals Agency a confirmation of registration for our MEG on November 17, 2020, and for our DMT on December 7, 2020. The registration under the Registration, Evaluation, Authorization and Restriction of Chemicals (“REACH”) Regulation (EC 1907/2006) confirms that our monomers are of a purity equal to what is currently recognized within Europe and entitles us to manufacture/import the monomers into Europe. It should be noted that MEG and DMT are on the positive list for plastic materials, which means that the two monomers can be used as food contact materials.

On August 31, 2021, Loop also received a NOL from Health Canada, which states that the PET produced by Loop’s recycling process is suitable for use in the manufacture of water bottles and articles for contact with all food types under all conditions of use.

On December 13, 2023, Loop announced that its Loop^™ branded PET resin has been tested and is compliant for use in packaging applications in the pharmaceutical industry. The rigorous requirements and standards outlined by the United States Pharmacopeia (USP <661.1>, Plastic Materials of Construction) and the European Pharmacopeia (Ph.Eur. 3.1.15, Polyethylene Terephthalate for Containers for Preparations not for Parenteral Uses) ensure that materials used in pharmaceutical packaging maintain the highest levels of integrity and do not compromise the safety and efficacy of the enclosed products. Test results executed by a worldwide leader in laboratory testing services confirm that Loop's PET resin has successfully met these requirements, opening new possibilities for sustainable packaging solutions in the pharmaceutical industry.

Additional Information

Human Capital

Our employees are essential to our success, and we are committed to providing a safe, productive, discrimination-free and harassment-free work environment. All employees are responsible for compliance with our Code of Ethics as well as our health and safety, and anti-harassment policies. These policies and practices help us foster a workplace environment that promotes inclusion and diversity.

To attract and retain highly capable and innovative employees, we have developed competitive compensation packages and benefits programs. Our compensation packages include market-competitive pay, healthcare benefits, paid time off and family leave and flexible work schedules. We also offer equity awards with multi-year vesting provisions to incentivize and reward certain employees for long-term corporate performance and promote retention throughout the vesting period.

As of February 29, 2024, we had 56 employees of which 21 work in research and development, 22 in engineering and operations, and 13 in administrative functions. 

Corporate History

We were originally incorporated under the name Radikal Phones Inc. in Nevada in March 2010. Loop Holdings, Inc. (“Loop Holdings”) was originally incorporated in Nevada in October 2014. In June 2015 we completed a reverse acquisition of Loop Holdings and the depolymerization business of Loop Holdings became our sole operating business. In July 2015 we changed our name to Loop Industries, Inc.

On November 20, 2017, Loop Industries, Inc. commenced trading on the Nasdaq Global Market under the trading symbol, “LOOP.”

Corporate Information

Our principal executive offices are located at 480 Fernand-Poitras Street, Terrebonne, Québec, Canada J6Y 1Y4. Our telephone number is (450) 951-8555.

Available Information

Our website is www.loopindustries.com, and our investor relations web page can be found at http://www.loopindustries.com/en/investors/overview. Copies of our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to these reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), are available, free of charge, on our investor relations website as soon as reasonably practicable after we file such material electronically with or furnish it to the SEC. The SEC also maintains a website that contains our SEC filings. The address of the site is www.sec.gov. The information contained on, or that can be accessed through, our website shall not be deemed incorporated by reference in any filing under the Exchange Act.

ITEM 1A. RISK FACTORS

You should carefully consider the risks described below together with all of the other information included in this Form 10-K before making an investment decision with regard to our securities. The statements contained in or incorporated herein that are not historic facts are forward-looking statements that are subject to risks and uncertainties that could cause actual results to differ materially from those set forth in or implied by forward-looking statements. If any of the following risks actually occur, our business, financial condition or results of operations could be harmed. In that case, you may lose all or part of your investment.

RISKS RELATING TO OUR BUSINESS AND TECHNOLOGY

We have incurred net losses since inception. We expect to continue to incur losses for the foreseeable future and may never achieve or maintain profitability. We have never generated material revenue and may never be profitable.

Since our inception in 2010, we have incurred net losses. Our net loss for the year ended February 29, 2024 was $21.09 million and we have earned limited revenues to date. We have financed our operations primarily through sales of common stock and incurrence of debt and have devoted substantial efforts to research and development, process engineering, as well as building our team. We expect to continue to incur significant expenses and operating losses for the foreseeable future. The net losses we incur may fluctuate significantly from quarter to quarter. Although we believe that our business plan has significant profit potential, we may not attain profitable operations and management may not succeed in realizing our business objectives. Our ability to generate revenue at a large scale depends on our ability to successfully complete the development of our technology and products, obtain the regulatory approvals necessary to commercialize our products, attract additional customers, and finance, build and operate commercial facilities. We expect to incur operating losses in future periods. These losses will occur as we do not have sufficient revenues to offset the expenses associated with our business operations. We may not generate material revenues from product sales for the next several years, if ever. If we are not able to develop our business as anticipated, we may not be able to generate revenues or achieve profitability. We cannot guarantee that we will ever be successful in generating revenues in the future.  If we are unable to generate revenues, we will not be able to earn profits or continue operations.

Based on its assessment, management estimates that current available liquidity and forecasted net cash flows will not be sufficient to meet the Company’s obligations, commitments and budgeted expenditures the next twelve months from the date of this Annual Report on Form 10-K. These events and conditions are material uncertainties that raise substantial doubt upon the Company’s ability to continue as a going concern and accordingly, the appropriateness of the use of accounting principles applicable to a going concern.

Since its inception, the Company has been in the pre-commercialization stage with no material revenues from customers, and its ongoing operations and commercialization plans have been financed primarily by raising equity. Therefore, the Company has incurred net losses and negative cash flow from operating and investing activities since its inception and expects to incur additional net losses while it continues to develop and plan for commercialization. As at February 29, 2024, the Company’s available liquidity was $9,537, consisting of cash and cash equivalents of $6,958 and an undrawn senior loan facility from a Canadian bank of $2,579.

Our ability to continue as a going concern is dependent on our ability to generate sufficient cash flows to meet our obligations and to obtain additional financing, as needed. There can be no assurance that we will be able to achieve these objectives. If we are unable to generate sufficient cash flows or obtain adequate financing, we may be required to significantly reduce, delay, or eliminate planned expenditures and other costs, which could have a material adverse effect on our business, financial condition, and results of operations. Additionally, we may be forced to seek protection under applicable bankruptcy laws and/or liquidate or reorganize our assets and liabilities.

The existence of a substantial doubt about our ability to continue as a going concern could materially limit our ability to raise additional funds through the issuance of new debt or equity securities or otherwise. The existence of substantial doubt about our ability to continue as a going concern may also adversely affect our relationships with current and potential customers, suppliers, and employees, making it more difficult to operate our business.

Investors should consider our financial condition, results of operations, and business prospects in light of the substantial doubt about our ability to continue as a going concern. If we are unable to continue as a going concern, our shareholders may lose all or a significant portion of their investment in our company.

We may not be able to execute our business plan or stay in business without additional funding.

Our ability to successfully commercialize our business and generate future revenues depends on whether we can obtain the necessary financing to implement our business plan, on acceptable terms. We will require additional financing through a combination of the issuance of debt, equity, and/or joint ventures and/or government incentive programs in order to establish profitable operations, and such financing may not be forthcoming. We are pursuing financial incentives and financing for our proposed projects with several countries through multiple programs that involve various branches of government. If we are unable to attract government incentives and financing to our projects or investors to invest in our business, we may not be able to acquire additional financing through debt or equity markets. Our failure to secure additional financing on favorable terms when it becomes required would have an adverse effect on our ability to execute our business plan or remain in business.

Our anticipated partnership and related financing arrangements are subject to closing conditions and no assurance can be given that those closing conditions will be completed.

Once binding agreements with respect to the Proposed Transaction (the “Reed Agreement”) are signed, in order to close, all the closing conditions under the Reed Agreement must be completed, prior to the termination of the Reed Agreement. As currently drafted, The Reed Agreement may be terminated upon the occurrence of certain events, including, but not limited to, voluntarily, by either party, if a closing has not occurred within six (6) months of signing. While Reed and Loop are working diligently to finalize and execute the Reed Agreement, and to accomplish the closing conditions in a timely manner, no assurance can be given that the closing conditions will be completed or that the transaction between Reed and the Company will be consummated.

Conditions in the financial markets and economic conditions in general may adversely affect our ability to raise additional capital, execute our business plan or remain in business.

The business environment in which we operate has been impacted by the effects of worldwide macroeconomic uncertainty. Economic activity improved slightly during 2023; however, economic concerns remain as a result of the cumulative weight of uncertainty regarding the economic conditions domestically and in foreign countries, including global political hostilities and other financial crises. Inflation has become elevated, reflecting demand and supply imbalances, supply chain issues, higher energy prices, fiscal stimulus and broader price pressures. Uncertainty surrounding the near-term direction of global markets, and the potential impact of these trends on the global economy, are expected to persist for the near term. Strategic risk, including threats to business models from rising interest rates and modest economic growth, remain high.

It is difficult to predict the extent to which these challenging economic conditions will persist or whether recent progress in the economic recovery will instead shift to the potential for further decline. If the economy does weaken in the future, it is uncertain how our business would be affected and whether we would be able successfully to mitigate any such effects on our business. Accordingly, these factors in the global economy could have an adverse effect on our ability to raise additional capital, execute our business plan or remain in business.

In 2023, multiple regional banks were either taken over by the Federal Deposit Insurance Corporation (FDIC) or entered receivership. If other banks and financial institutions enter receivership or become insolvent in the future in response to financial conditions affecting the banking system and financial markets, our ability to access our existing cash, cash equivalents and investments may be threatened and could have a material adverse effect on our business and financial condition. Weakness and volatility in capital markets and the economy, in general or as a result of bank failures or macroeconomic conditions such as rising inflation, could limit our access to capital markets and increase our costs of borrowing.

Our technology may not be successful in developing commercial products.

We and our potential future collaborators may spend many years and dedicate significant financial and other resources to developing our technology that may never be successfully commercialized. Our technology may never become successfully commercialized for, among others, any of the following reasons:

If any of these things were to occur, it could have an adverse effect on our ability to raise additional capital, execute our business plan, or remain in business.

We face business risks due to our relationships with strategic partners.

We rely on our strategic partner relationships for the scaling, manufacturing and commercialization of our technology. We have various arrangements with SKGC, Suez, Ester and Reed to commercially scale our technology in Asia and Europe and with Chemtex and our external engineering partners. We also have various supply agreements with Danone, L’Oréal and L’OCCITANE en Provence for our planned commercial facilities. Termination of any of these agreements could have an adverse effect on our business. In particular, certain of our agreements with our strategic partners have termination rights related to the satisfaction of milestones, some of which we have not achieved. Though we have not received any indication from our strategic partners as to their indication to terminate, we cannot provide assurance that these strategic partners with whom we have entered into such agreements will not exercise their applicable termination rights, which are not within our control.

Any failure of our strategic partners or us to meet our required commitments, whether financial or otherwise, could result in a termination of such agreements as described above, operational issues, increased expenditures, or damage to our reputation or loss of clients or customers, any of which could adversely affect our business and operations, financial performance, or prospects.

If we are unable to successfully scale our manufacturing processes, we may not meet customer demand.

To be successful, we will have to scale our manufacturing processes while maintaining high product quality and reliability. If we cannot maintain high product quality at a large scale, our business will be adversely affected. We may encounter difficulties in scaling up production, including problems with the supply of key components. Even if we are successful in developing our manufacturing capability, we do not know whether we will do so in time to satisfy the requirements of our customers. Our current manufacturing facility is a small-scale plant with limited production capacity used principally for research and development, training, and customer marketing purposes. In order to fully implement our business plan, we will need to scale the operations to a larger industrial commercial facility, develop strategic partnerships, or find other means to produce greater volumes of finished product. We, however, have not yet tested our technology at the scale that will be required for large commercial use nor at a scale sufficient to conclude the success of our technology.  

Disruption at, damage to, or destruction of our Terrebonne Facility could impede our ability to continue innovating and refining our technological process, and supporting our commercial projects, which would harm our business, financial condition, and operating results.

Our research and development activities are performed from a single location in Terrebonne, Québec. Our continued innovation activities rely on an uninterrupted and fully functioning plant. Interruptions in operations at this location could result in our inability to provide the most efficient and effective technological solution to our customers. A number of factors could cause interruptions, including, but not limited to, equipment malfunctions or failures, technology malfunctions, work stoppages or slow-downs, damage to or destruction of the facility, or regional power shortages. As our equipment ages, it will need to be replaced. Any disruption that impedes our ability to optimize our process and provide support for our commercial projects in a timely manner could reduce our revenues and materially harm our business.

The plastics manufacturing industry is extremely price-competitive because of the commodity-like nature of virgin PET resin, and its correlation to the price of crude oil. If our cost to manufacture rPET is not competitive with virgin PET, or if the price of oil decreases significantly, it may adversely impact our ability to penetrate the market or be profitable.

The demand for rPET has historically fluctuated with the price of crude oil. If crude oil prices decline, the cost to manufacture rPET may become comparatively higher than the cost to manufacture virgin alternatives. Our ability to penetrate the market will depend in part on the cost of manufacturing of our products, and if we do not successfully distinguish our products from those of virgin manufacturers our entry into the market and our ability to secure customer contracts can be adversely affected.

We are vulnerable to fluctuations in the supply and price of raw materials.

We purchase raw materials and packaging supplies from several sources. While all such materials are available from independent suppliers, raw materials are subject to fluctuations in price and availability attributable to a number of factors, including general economic conditions, commodity price fluctuations, the demand by other industries for the same raw materials, and the availability of complementary and substitute materials. The profitability of our business also depends on the availability and proximity of these raw materials to our factories. The choice of raw materials to be used at our facility is determined primarily by the price and availability, yield loss of lower quality raw materials, and the capabilities of the producer’s production facility. Additionally, the cost of transportation could favor suppliers located in close proximity to our factories. If the quality of these raw materials is lower, the quality of our product may suffer. Economic and financial factors could impact our suppliers, thereby causing supply shortages. Increases in raw material costs could have a material adverse effect on our business, financial condition, or results of operations. Our feedstock supply strategy, including any hedging procedures, may be insufficient, and our results could be materially impacted if costs of materials increase.

The loss of the services of Mr. Daniel Solomita, our President and Chief Executive Officer, and Chairman of the Board of Directors, or our failure to timely identify and retain competent personnel could negatively impact our ability to develop our business.

The development of our business and the marketing of our prospective products will continue to place a significant strain on our limited personnel, management, and other resources. Our future success depends upon the continued services of our executive officers who are developing our business, and on our ability to identify and retain competent consultants and employees with the skills required to execute our business objectives. The loss of the services of Mr. Daniel Solomita or our failure to timely identify and retain competent personnel could negatively impact our ability to develop our business, which could adversely affect our financial results and impair our growth plans.

We are subject to certain risks related to litigation filed by or against us and investigations we are subject to, and adverse results may harm our business.

We cannot predict with certainty the cost of defense, of prosecution, or of the ultimate outcome of litigation, investigations and other proceedings filed by or against us or individuals to whom we may have indemnity and/or advancement obligations, including penalties or other civil or criminal sanctions, or remedies or damage awards, and adverse results in any litigation and other proceedings may materially harm our business, including the subpoena we received from the SEC in October 2020 requesting certain information regarding testing, testing results and details of results from our GEN I and GEN II technologies and certain of our partnerships and agreements. In March 2022, we received a subpoena requesting additional information, including information concerning our reverse-merger in 2015, and communications with certain individuals and entities. There have been no further information requests relating to the Company’s business or technology. Litigation and other proceedings may include, but are not limited to, actions relating to intellectual property, international trade, commercial arrangements, product liability, environmental, health and safety, joint venture agreements, labor and employment, or other harms resulting from the actions of individuals or entities outside of our control. In the case of intellectual property litigation and proceedings, adverse outcomes could include the cancellation, invalidation or other loss of material intellectual property rights used in our business and injunctions prohibiting our use of business processes or technology that are subject to third-party patents or other third-party intellectual property rights. We expect to continue to incur legal fees in relation to litigation, investigations and other proceedings.

We are subject to an SEC Investigation which could have a material adverse impact on our business, financial condition, results of operation, cash flows and reputation.

As described in “Item 3. Legal Proceedings—SEC Investigation,” of this Annual Report on Form 10-K, the SEC in October 2020 requested certain information regarding testing, testing results and details of results from our GEN I and GEN II technologies and certain of our partnerships and agreements. In March 2022, we received a subpoena requesting additional information, including information concerning our reverse-merger in 2015, and communications with certain individuals and entities. There have been no further information requests relating to the Company’s business or technology. We cannot predict or provide any assurance as to the timing, outcome or consequences of the SEC investigation. If the SEC were to conclude that enforcement action is appropriate, we could be required to pay civil penalties and fines, and the SEC could impose other sanctions against us or against our current and former officers and directors. We have incurred, and may continue to incur, significant expenses related to legal and other professional services in connection with matters relating to or arising from the SEC investigation. In addition, our Board of Directors, management, and employees may expend a substantial amount of time on the SEC investigation, diverting resources and attention that would otherwise be directed toward our operations and implementation of our business strategy, all of which could materially adversely affect our business, financial condition, and results of operations. Furthermore, while the SEC has informed us that the investigation should not be construed as an indication by the SEC or its staff that any violation of law has occurred, nor as a reflection upon any person, entity or security, publicity surrounding the foregoing, or any SEC enforcement action or settlement as a result of the SEC’s investigation, even if ultimately resolved favorably for us, could have an adverse impact on our reputation, business, financial condition, or results of operations.

Our Terrebonne Facility or other planned facilities must operate under policies, procedures, and controls for the operation of a chemical manufacturing facility as required under various federal, provincial and local regulations and codes. Failure to comply with such regulations and codes may lead to disruption of operations at the Terrebonne Facility or other planned facilities and the development of our technology, and financial sanctions.

We are subject to health and safety as well as environmental, zoning and any other regulatory requirements to operate our Terrebonne Facility and our other planned facilities, and as our business evolves, we, directly or indirectly through our partners or other related parties, may be subject to additional government regulations. Any failure to comply with ongoing regulatory requirements, as well as discovery of previously unknown problems, may result in, among other things, costly regulatory inspections, fines or remediation plans. If regulatory issues arise, the value of our business and our operating results may be adversely affected.

Additionally, applicable regulations may change, and additional government regulations may be enacted that could impact our business. We cannot predict the likelihood, nature, or extent of government regulation that may arise from future legislation or administrative action, either in Canada, the United States or abroad. If we are not able to maintain regulatory compliance, are slow or unable to adopt new requirements or policies, or effect changes to existing requirements, our business may be adversely affected.

Our failure to protect our intellectual property and proprietary technology may significantly impair our competitive advantage.

Our success and ability to compete depend in large part upon protecting our proprietary technology. We rely on a combination of patent, trademark and trade secret protection, confidentiality, nondisclosure and non-use agreements to protect our proprietary rights. The steps we have taken may not be sufficient to prevent the misappropriation of our intellectual property, particularly in foreign countries where the laws may not protect our proprietary rights as fully as in the United States. The patent and trademark law and trade secret protection may not be adequate to deter third party infringement or misappropriation of our patents, trademarks and similar proprietary rights.

We may face costly intellectual property infringement claims, the result of which would decrease the amount of cash available to operate and complete our business plan.

We anticipate that, from time to time, we will receive communications from third parties asserting that we are infringing certain patents and other intellectual property rights of others or seeking indemnification against alleged infringement. If anticipated claims arise, we will evaluate their merits. Any claims of infringement brought forth by third parties could result in protracted and costly litigation, damages for infringement, and the necessity of obtaining a license relating to one or more of our products or current or future technologies, which may not be available on commercially reasonable terms or at all. Litigation, which could result in substantial costs to us and diversion of our resources, may be necessary to enforce our patents or other intellectual property rights or to defend us against claimed infringement of the rights of others. Any intellectual property litigation and the failure to obtain necessary licenses or other rights could have a material adverse effect on our business, financial condition and results of operations. 

We rely in part on trade secrets to protect our technology, and our failure to obtain or maintain trade secret protection could harm our business.

We rely on trade secrets to protect some of our technology and proprietary information, especially where we believe patent protection is not appropriate or obtainable. However, trade secrets are difficult to protect. Litigating a claim that a third party had illegally obtained and used our trade secrets would be expensive and time-consuming, and the outcome would be unpredictable. Moreover, if our competitors independently develop similar knowledge, methods and know-how, it will be difficult for us to enforce our rights and our business could be harmed.

If our information technology systems or data, or those of third parties upon which we rely, are or were compromised, we could experience material adverse effects on our business, financial condition, results of operations and prospects.

Cyberattacks, malicious internet-based activity, and online and offline fraud are prevalent and continue to increase. These threats are becoming increasingly difficult to detect and pose a risk to the security of our systems and networks and the confidentiality, availability and integrity of data. Disruptions or failures in the physical infrastructure or operating systems that support our business, suppliers and other partners, or cyber-attacks or security breaches of our networks or systems or of third party suppliers and service providers, could result in the loss of customers and business opportunities, lawsuits, regulatory fines, penalties or intervention, reputational damage, reimbursement or other compensatory costs, and additional compliance costs, any of which could materially adversely affect our business, financial condition, results of operations and prospects. Increasing costs associated with cybersecurity protections may be costly and may also adversely affect our financial condition. While we attempt to mitigate these risks, our systems, data, networks, products, and technology remain potentially vulnerable to advanced and persistent cybersecurity threats.

In the ordinary course of our business, we may process proprietary, confidential, and sensitive data, including personal data, intellectual property, and trade secrets (collectively, sensitive information) that is subject to privacy and security laws and regulations. Despite our efforts to protect sensitive information, our facilities and systems, business partners, suppliers and third-party service providers may be vulnerable to cybersecurity incidents, theft, misplaced or loss of data, programming and/or human errors that could lead to the compromise of sensitive, confidential or personal data or information or unauthorized use or disruption of our systems and software.

While we have implemented security measures designed to protect against security incidents, there can be no assurance that these measures will be effective. We take steps to detect and remediate vulnerabilities, but we may not be able to detect and remediate all vulnerabilities because the threats and techniques used to exploit such vulnerabilities change frequently and are often sophisticated in nature. Therefore, such vulnerabilities could be exploited but may not be detected until after a security incident has occurred. These vulnerabilities pose material risks to our business.

Despite our efforts to identify and remediate vulnerabilities, if any, in our information technology systems, our efforts may not be successful. Further, we may experience delays in developing and deploying remedial measures designed to address any such identified vulnerabilities. Applicable data privacy and security obligations may require us to notify relevant stakeholders of security incidents. Such disclosures are costly, and the disclosures or the failure to comply with such requirements could lead to adverse consequences.

If we fail to maintain an effective system of internal control over financial reporting, we may not be able to accurately or timely report our financial condition or results of operations, which may adversely affect investor confidence in us and the price of our common stock.

We are required to evaluate our internal control over financial reporting under Section 404 of the Sarbanes-Oxley Act of 2002 (“Section 404”). Section 404 requires us to include an internal control report with our Annual Report on Form 10-K. This report must include management’s assessment of the effectiveness of our internal control over financial reporting as at the end of the fiscal year. This report must also include disclosure of any material weaknesses in internal control over financial reporting that we have identified. 

The process of designing and implementing internal control over financial reporting required to comply with Section 404 of the Sarbanes-Oxley Act is time consuming, costly and complicated. If, during the evaluation and testing process, we identify one or more other material weaknesses in our internal control over financial reporting or determine that existing material weaknesses have not been remediated, our management will be unable to assert that our internal control over financial reporting is effective. Even if our management concludes that our internal control over financial reporting is effective, our independent registered public accounting firm may conclude that there are material weaknesses with respect to our internal controls or the level at which our internal controls are documented, designed, implemented or reviewed. As we remain a Smaller Reporting Company, our independent registered public accounting firm is not required to express an opinion as to the effectiveness of our internal control over financial reporting. However, pursuant to Section 404, in the future, we may be required to furnish an attestation on internal control over financial reporting issued by our independent registered public accounting firm. Despite our efforts, our independent registered public accounting firm may determine we have a material weakness or significant deficiency in our internal controls over financial reporting once such firm begins its Section 404 reviews in the future. If we are unable to assert that our internal controls over financial reporting are effective, or when required in the future, if our independent registered public accounting firm is unable to express an opinion as to the effectiveness of our internal controls over financial reporting as required by Section 404, investors may lose confidence in the accuracy and completeness of our financial reports, the market price of our common stock could be adversely affected and we could become subject to litigation or investigations by the stock exchange on which our securities are listed, the SEC or other regulatory authorities, which could require additional financial and management resources.

We are subject to risks associated with currency fluctuations, and changes in foreign currency exchange rates could impact our results of operations.

We operate mainly through two entities, Loop Industries, Inc., which is a Nevada corporation and has a U.S. dollar functional currency, and our wholly-owned subsidiary, Loop Canada Inc. (“Loop Canada”), which is based in Terrebonne, Québec, Canada and has a Canadian dollar functional currency. Our reporting currency is the U.S. dollar.

We mainly finance our operations through the sale and issuance of shares of common stock of Loop Industries, Inc. in U.S. dollars while our operations are concentrated in our wholly-owned subsidiary, Loop Canada. Accordingly, we are exposed to foreign exchange risk as we maintain bank accounts in U.S. dollars and a significant portion of our operational costs (including payroll, site costs, costs of locally sourced supplies, and income taxes) are denominated in Canadian dollars.

Significant fluctuations in U.S. dollar to Canadian dollar exchange rates could materially affect our result of operations, cash position and funding requirements. To the extent that fluctuations in currency exchange rates cause our results of operations to differ materially from our expectations or the expectations of our investors, the trading price of our common stock could be adversely affected.

From time to time, we may engage in exchange rate hedging activities in an effort to mitigate the impact of exchange rate fluctuations. As part of our risk management program, we may enter into foreign exchange forward contracts to lock in the exchange rates for future foreign currency transactions, which is intended to reduce the variability of our operating costs and future cash flows denominated in currencies that differ from our functional currencies. We do not enter into these contracts for trading purposes or speculation, and our management believes all such contracts are entered into as hedges of underlying transactions. Nonetheless, these instruments involve costs and have risks of their own in the form of transaction costs, credit requirements and counterparty risk. If our hedging program is not successful, or if we change our hedging activities in the future, we may experience significant unexpected expenses from fluctuations in exchange rates. Any hedging technique we implement may fail to be effective. If our hedging activities are not effective, changes in currency exchange rates may have a more significant impact on the trading price of our common stock.

We are subject to various federal, provincial, state and local laws and regulations and failure to secure and maintain permits could result in costs that have a material adverse effect on our business, results of operations and financial condition.

Many federal, provincial, state and local regulations govern plants and facilities and licenses to be held by individuals. We are in the process of obtaining all necessary permits and approvals for the operation of our business; however, any of these permits or approvals may be subject to denial, revocation or modification under various circumstances. The requirements for such permits vary depending on the location where our regulated activities are operated. As these are governmental permitting processes, there is a degree of uncertainty as to whether a permit will be granted, the time it will take for a permit to be issued, the duration of the permit and the conditions that may be imposed in connection with the granting of the permit.

We believe that we have all licenses required to conduct our operations and are in material compliance with applicable regulatory requirements. Failure to comply with applicable regulations could result in substantial fines or revocation of our permits and licenses or an inability to perform work, which could adversely affect our business.

RISKS ASSOCIATED WITH OUR SECURITIES

Raising additional funds may cause dilution to our existing stockholders, restrict our operations or require us to relinquish rights to our technologies.

If we raise additional funds through equity offerings or offerings of equity-linked securities, including warrants or convertible debt securities, our existing stockholders may experience significant dilution, and the terms of such securities may include liquidation or other preferences that may adversely affect the rights of our stockholders. Our existing $15 and $20 warrants are subject to a broad based weighted average anti-dilution provision, which may result in a reduction of the warrant exercise price if new equity above $65 million is raised under certain levels. The warrant exercise prices cannot be adjusted to less than $12.45. Debt financings, if available, may subject us to restrictive covenants that could limit our flexibility in conducting future business activities, including covenants limiting or restricting our ability to incur additional debt, dispose of assets or incur capital expenditures. We may also incur ongoing interest expense and be required to grant a security interest in our assets in connection with any debt issuance. If we raise additional funds through strategic partnerships or licensing agreements with third parties, we may have to relinquish valuable rights to our technologies or grant licenses on terms that are not favorable to us.

Trading volume in our stock can fluctuate and an active trading market for our common stock may not be available on a consistent basis to provide stockholders with adequate liquidity. Our stock price may be volatile, and our stockholders could incur significant investment losses.

The trading price for our common stock will be affected by a number of factors, including:

As a result of these factors, our stockholders may not be able to resell their shares at, or above, their purchase price. In addition, the stock prices of many technology companies have experienced wide fluctuations that have often been unrelated to the operating performance of those companies. Any negative change in the public’s perception of the prospects of companies in our industry could depress our stock price regardless of our results of operations. These factors may have a material adverse effect on the market price and liquidity of our common stock and affect our ability to obtain the required financing.

Our President and Chief Executive Officer and Chairman of the Board of Directors, Mr. Daniel Solomita, beneficially owns a majority of the total voting power of our capital stock, and accordingly, has control over stockholder matters, our business and management.

As at May 28, 2024, Mr. Daniel Solomita, our President and Chief Executive Officer, Chairman of the Board of Directors, and controlling stockholder, beneficially owns 19,210,000 shares of common stock, or 40.4% of our issued and outstanding shares of common stock and also holds one share of Series A Preferred Stock. The one share of Series A Preferred Stock issued to Mr. Solomita holds a majority of the total voting power so long as Mr. Solomita holds not less than 7.5% of the total number of outstanding shares of our common stock on February 12, 2016 (as adjusted for any stock splits and stock dividends effected after February 12, 2016), assuring Mr. Solomita of control of the Company in the event that his ownership of the issued and outstanding shares of our common stock is diluted to a level below a majority. Currently, Mr. Solomita’s beneficial ownership of 19,210,000 shares of common stock and one share of Series A Preferred Stock provides him with 75.7% of the voting control of the Company.

Additionally, the one share of Series A Preferred Stock issued to Mr. Solomita contains protective provisions, which preclude us from taking certain actions without Mr. Solomita’s (or that of any person to whom the one share of Series A Preferred Stock is transferred) approval. More specifically, so long as any shares of Series A Preferred Stock are outstanding, we are not permitted to take certain actions without first obtaining the approval (by vote or written consent, as provided by law) of the holders of at least a majority of the then outstanding shares of Series A Preferred Stock, voting as a separate class, including for example and without limitation, amending our articles of incorporation, changing or modifying the rights of the Series A Preferred Stock, including increasing or decreasing the number of authorized shares of Series A Preferred Stock, increasing or decreasing the size of the Board of Directors or removing the director appointed by the holders of our Series A Preferred Stock, replacing the President and/or Chief Executive Officer of the Company (unless approved by the Board of Directors, including the director appointed by the holders of our Series A Preferred Stock), and declaring or paying any dividend or other distribution.

As a result, Mr. Solomita has the ability to control the outcome of matters submitted to our stockholders for approval, including the election of directors and any merger, consolidation, or sale of all or substantially all of our assets. In addition, under Nevada law and subject to certain exceptions, any director or one or more of the incumbent directors may be removed as a director only by the vote of stockholders representing not less than two-thirds of the voting power of the issued and outstanding stock entitled to vote. Mr. Solomita therefore has the voting power to remove directors who oppose actions or decisions he favors. This concentrated control could delay, defer, or prevent a change of control, merger, consolidation, or sale of all or substantially all of our assets that our other stockholders support, or conversely this concentrated control could result in the consummation of such a transaction that our other stockholders do not support. This concentrated control could also discourage a potential investor from acquiring our common stock due to the limited voting power of such stock relative to the Series A Preferred Stock and might harm the market price of our common stock. In addition, Mr. Solomita has the ability to control the management and major strategic investments of our company as a result of his position as our President, Chief Executive Officer, and Chairman of the Board of Directors and his ability to control the election or replacement of our directors. Because of this significant ownership position, new investors may not be able to effect a change in our business or management, and therefore, stockholders would have no recourse as a result of decisions made by management. As a board member and officer, Mr. Solomita owes a fiduciary duty to our stockholders and must act in good faith in a manner he reasonably believes to be in the best interests of our stockholders. As a stockholder, even a controlling stockholder, Mr. Solomita is entitled to vote his shares in his own interests, which may not always be in the interests of our stockholders generally.

In addition, sales of significant amounts of shares held by Mr. Solomita, or the prospect of these sales, could adversely affect the market price of our common stock. Management’s stock ownership may discourage a potential acquirer from making a tender offer or otherwise attempting to obtain control of us, which in turn could reduce our stock price or prevent our stockholders from realizing a premium over our stock price.

Anti-takeover effects of certain provisions of Nevada state law hinder a potential takeover of our company.

Though not now, we may in the future become subject to Nevada’s control share law. A corporation is subject to Nevada’s control share law if it has more than 200 stockholders, at least 100 of whom are stockholders of record and residents of Nevada, and it does business in Nevada or through an affiliated corporation. The law focuses on the acquisition of a “controlling interest,” which means the ownership of outstanding voting shares sufficient, but for the control share law, to enable the acquiring person to exercise the following proportions of the voting power of the company in the election of directors: (i) one-fifth or more but less than one-third, (ii) one-third or more but less than a majority, or (iii) a majority or more. The ability to exercise such voting power may be direct or indirect, as well as individual or in association with others.

The effect of the control share law is that the acquiring person, and those acting in association with it, obtains only such voting rights in the control shares as are conferred by a resolution of our stockholders, approved at a special or annual meeting of stockholders. The control share law contemplates that voting rights will be considered only once by the other stockholders. Thus, there is no authority to strip voting rights from the control shares of an acquiring person once those rights have been approved. If the stockholders do not grant voting rights to the control shares acquired by an acquiring person, those shares do not become permanent non-voting shares. The acquiring person is free to sell its shares to others. If the buyers of those shares themselves do not acquire a controlling interest, their shares do not become governed by the control share law.

If control shares are accorded full voting rights and the acquiring person has acquired control shares with a majority or more of the voting power, any stockholder of record, other than an acquiring person, who has not voted in favor of approval of voting rights, is entitled to demand fair value for such stockholder’s shares.

In addition to the control share law, Nevada has a business combination law that prohibits certain business combinations between Nevada corporations and “interested stockholders” for three years after the “interested stockholder” first becomes an “interested stockholder,” unless the company’s Board of Directors approves the combination in advance. For purposes of Nevada law, an “interested stockholder” is any person who is (i) the beneficial owner, directly or indirectly, of ten percent or more of the voting power of the outstanding voting shares of the company, or (ii) an affiliate or associate of the company and at any time within the two previous years was the beneficial owner, directly or indirectly, of ten percent or more of the voting power of the then outstanding shares of the company. The definition of the term “combination” is sufficiently broad to cover virtually any kind of transaction that would allow a potential acquirer to use the company’s assets to finance the acquisition or otherwise to benefit its own interests rather than the interests of the company and its other stockholders.

The effect of Nevada’s business combination law is to potentially discourage parties interested in taking control of us from doing so if it cannot obtain the approval of our Board of Directors.  

Because we do not intend to pay any cash dividends on our common stock, our stockholders will not be able to receive a return on their shares unless they sell them.

We intend to retain any future earnings to finance the development and expansion of our business. We do not anticipate paying any cash dividends on our common stock in the foreseeable future. Unless we pay dividends, our stockholders will not be able to receive a return on their shares unless they sell them. Stockholders may not be able to sell shares when desired. Before you invest in our securities, you should be aware that there are various risks. You should consider carefully these risk factors, together with all of the other information included in this Annual Report on Form 10-K before you decide to purchase our securities. If any of these risks and uncertainties develop into actual events, our business, financial condition or results of operations could be materially adversely affected.

Sales of a significant number of shares of our common stock in the public markets, or the perception that such sales could occur, could depress the market price of our common stock.

Sales of a significant number of shares of our common stock in the public markets, or the perception that such sales could occur could depress the market price of our common stock and impair our ability to raise capital through the sale of additional equity securities. Notably, pursuant to the Investor Rights Agreement, we are required to register for public resale the Loop common stock held by the Purchaser. Following the effectiveness of such registration statement, a large number of shares of our common stock could be sold in the public market, depressing our stock price. Moreover, we cannot in general predict the effect that future sales of our common stock or the market perception that we are permitted to sell a significant number of our securities would have on the market price of our common stock.

ITEM 1B. UNRESOLVED STAFF COMMENTS

Not applicable.

ITEM 1C. CYBERSECURITY

Cybersecurity Risk Management and Strategy

Assessment, identification and management of material risks from cybersecurity threats are integrated into the Company’s overall risk management processes to promote a company-wide culture of cybersecurity risk management. Our Chief Financial Officer is responsible for the evaluation of material risks from cybersecurity threats and reports to both the Company’s executive management team and the Audit Committee of the Board of Directors. We also regularly use third-party service providers to assist us to identify, assess, and manage material risks from cybersecurity threats, including cybersecurity consultants, as well as data backup and recovery providers.

We have implemented and maintain information security processes designed to identify, assess, and manage material risks from cybersecurity threats to our critical networks, third-party hosted services, communications systems, hardware and software, and our critical data, including intellectual property and confidential information that is proprietary, strategic, or competitive in nature (“Information Systems and Data”).

The Chief Financial Officer is responsible, with the support of the Company’s internal IT staff and external service providers, for helping to identify, assess and manage the Company’s cybersecurity threats and risks, using internal resources as well as third-party service providers, by monitoring our threat environment using, among other things, manual processes, automated tools, internal audits, threat and vulnerability assessments, evaluating threats reported to us, evaluating our risk profile, and subscribing to reports and services that identify cybersecurity threats.

We implement and maintain various technical, physical, and organizational measures, processes, and policies designed to manage and mitigate material risks from cybersecurity threats to our Information Systems and Data. These include amongst others data encryption, risk assessments, network security and access controls, physical security, asset management, and systems monitoring. In addition, to oversee and identify any risks associated with our use of third-party service providers, we review Service Organization Controls reports of such third-party service providers when onboarding the provider and annually thereafter.

To protect our information systems from cybersecurity threats, we use various security tools that help prevent, identify, escalate, investigate, resolve and recover from identified vulnerabilities and security incidents in a timely manner. These include, but are not limited to, internal reporting, monitoring and detection tools, some of which are managed by a third-party service provider.

For a description of the risks from cybersecurity threats that may materially affect the Company and how they may do so, see our risk factors under Part I. Item 1A. Risk Factors in this Annual Report on Form 10-K.

Cybersecurity threats have not materially affected the Company, including its business strategy, results of operations or financial condition. The Company does not believe that cybersecurity threats resulting from any previous cybersecurity incidents of which it is aware are reasonably likely to materially affect the Company.

Cybersecurity Governance

Our Board of Directors oversees the Company’s risk management process, including cybersecurity risks, directly and through its committees. Pursuant to the Audit Committee Charter, the Audit Committee of the Board of Directors oversees management’s processes for identifying, monitoring and addressing enterprise risks. In addition, the Audit Committee of the Board of Directors discusses with management the adequacy and effectiveness of the Company’s policies and procedures regarding information technology risk management and internal controls related to cybersecurity.

Our cybersecurity risk assessment and management processes are implemented and maintained by certain members of the Company’s management. In particular, the Chief Financial Officer is responsible for hiring appropriate personnel and engaging external service providers with relevant cybersecurity expertise, helping to integrate cybersecurity risk considerations into the Company’s overall risk management strategy, and communicating key priorities to relevant personnel, helping prepare for cybersecurity incidents, approving cybersecurity processes and technologies, and reviewing security assessments and other security-related reports. In addition, the Chief Financial Officer provides reports to the Audit Committee concerning the Company’s cybersecurity posture and significant threats and risks and the processes to address them.

Our security incident response plan (“SIRP”) is designed to escalate certain cybersecurity incidents to members of the Company’s executive management team depending on the circumstances. The Chief Financial Officer and relevant department heads work with our incident response team to help the Company mitigate and remediate cybersecurity incidents of which they are notified. The SIRP provides for escalation of potentially material cybersecurity incidents to the Audit Committee.

ITEM 2. PROPERTIES

Our Terrebonne Facility and corporate offices are located at 480 Fernand-Poitras, Terrebonne, Québec, Canada J6Y 1Y4. The 33.2 thousand square foot facility includes 13.0 thousand square feet for our executive offices and 20.2 thousand square feet for our innovation and operational activities. We believe that our existing facilities are adequate for our current needs.

ITEM 3. LEGAL PROCEEDINGS

SEC Investigation

As previously disclosed, we received a subpoena from the SEC in October 2020 requesting certain information from us, including information regarding testing, testing results and details of results from our GEN I and GEN II technologies, and certain of our partnerships and agreements. In March 2022, we received a second subpoena requesting additional information, including information concerning our reverse-merger in 2015, and communications with certain individuals and entities. There have been no additional information requests from the SEC relating to the Company’s business or technology.

The SEC informed us that its investigation does not mean that the SEC has concluded that anyone has violated the law and that the investigation does not mean that the SEC has a negative opinion of us. We cannot predict when this matter will be resolved or what, if any, action the SEC may take following the conclusion of the investigation.

On September 30, 2022, the SEC filed a complaint (the “SEC complaint”) against several named defendants (“Defendants”), and also identified as a relief defendant Daniel Solomita, our Chief Executive Officer. The SEC complaint does not allege wrongdoing by the Company or Mr. Solomita. The SEC complaint identifies Mr. Solomita and an entity he owns as relief defendants because they purportedly received monies from the Defendants in 2015 that the SEC alleges were derived from the Defendants’ fraud. The SEC complaint does not allege that Mr. Solomita was aware of the alleged wrongdoing by the Defendants and does not allege that he was aware that any alleged monies received were derived from fraud.

Litigation

From time to time, we may become involved in various lawsuits and legal proceedings or investigations that arise in the ordinary course of business. Except as noted above, we are not presently a party to any legal proceedings, government actions, administrative actions, investigations or claims that are pending against us or involve us that, in the opinion of our management, could reasonably be expected to have a material adverse effect on our business, financial condition or operating results. However, litigation is subject to inherent uncertainties, and an adverse result in these or other matters may arise from time to time that may harm our business.

It is possible that we may expend financial and managerial resources in the defense of our intellectual property rights in the future if we believe that our rights have been violated. It is also possible that we may expend financial and managerial resources to defend against claims that our products and services infringe upon the intellectual property rights of third parties.

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Information for Common Stock

Our common stock is currently traded on the Nasdaq Global Market under the symbol “LOOP.”

Holders

As at May 28, 2024, there were 47,538,745 shares of common stock issued and outstanding (excluding shares of common stock issuable upon conversion of all of our currently outstanding Series A Preferred Stock) held by approximately 43 stockholders of record. The actual number of stockholders is greater than this number of record holders, and includes stockholders who are beneficial owners, but whose shares are held in street name by brokers and other nominees. This number of holders of record also does not include stockholders whose shares may be held in trust by other entities.

Dividends

We have not declared any dividends and we do not plan to declare any dividends in the foreseeable future. There are no restrictions in our Articles of Incorporation or By-laws that prevent us from declaring dividends, except that we are not permitted to declare or pay any dividend or other distribution without first obtaining the approval (by vote or written consent, as provided by law) of the holders of at least a majority of the then outstanding shares of Series A Preferred Stock, voting as a separate class. The Nevada Revised Statutes, however, prohibit us from declaring dividends where, after giving effect to the distribution of the dividend:

Recent Sales of Unregistered Securities

None.

Purchases of Equity Securities by the Registrant and Affiliated Purchasers

We did not purchase any of our shares of common stock or other securities during the year ended February 29, 2024.

ITEM 6. [Reserved]

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following information and any forward-looking statements should be read in conjunction with “Risk Factors” discussed elsewhere in this Annual Report on Form 10-K. Please refer to the Cautionary Note Regarding Forward-Looking Statements on page 4.

Overview

Loop is a technology company whose mission is to accelerate the world’s shift towards sustainable PET plastic and polyester fiber and away from the dependence on fossil fuels. Loop owns patented and proprietary technology that depolymerizes no and low-value waste PET plastic and polyester fiber (“Infinite Loop^™ Technology”), including plastic bottles and packaging, carpets and textiles of any color, transparency or condition and even ocean plastics that have been degraded by the sun and salt, to its base building blocks (monomers). The monomers are filtered, purified and polymerized to create virgin-quality Loop^™ branded PET resin suitable for use in food-grade packaging and polyester fiber, as well as other specialty polymers, thus enabling our customers to meet their sustainability objectives. Loop is contributing to the global movement towards a circular economy by reducing and recovering plastic waste for a sustainable future.

The Company is presently in the planning stages of pursuing the construction of Infinite Loop^™ commercial scale facilities. Loop is currently engaged in discussions to secure financing for its investments in the various planned manufacturing facilities and the sequencing of the manufacturing facilities will be determined in conjunction with the outcome of the Company’s financing discussions and discussions with our partners.

In the past years, we have seen major consumer brands make significant commitments to close the loop on their plastic use by transitioning their packaging to recyclable materials and by incorporating more recycled content into their packaging. We believe Loop^™ PET resin and polyester fiber provides the ideal solution for these brands because it is recyclable and is made from 100% recycled waste PET and polyester fiber, while being virgin-quality and suitable for use in food-grade packaging.

Commercialization Plan and Progress

Our objective is to achieve global expansion of the Infinite Loop^™ Technology through a mix of fully owned manufacturing facilities, strategic partnerships, and licensing agreements. We believe that industrial companies, some of which today may not be in the business of manufacturing DMT, MEG, PET resin, polyester fiber or other specialty polymers, will view involvement with Infinite Loop^™ projects as a significant growth opportunity, which may offer attractive economic returns either as Loop manufacturing partners or as licensees of the technology.

The Infinite Loop^™ Technology is the key pillar of our commercialization blueprint. We believe our technology is at the forefront of the global transition away from fossil fuels and petrochemicals and into the circular economy, where PET plastic and polyester fiber are produced by recycling waste plastic rather than depleting finite resources. The Infinite Loop^™ Technology allows for waste PET plastic and polyester fiber to be broken down into its base building blocks, monomers DMT and MEG, using Loop’s patented technology. Once the monomers are purified, they can be sold directly to chemical companies, used in the production of specialty polymers, or repolymerized into PET plastic or polyester fiber using INVISTA know-how, which Loop licenses, and Chemtex Global Corporation’s engineering. The INVISTA polymerization process and the associated designs are historically proven in the commercial production of PET resin and polyester fiber.

We have completed our basic design package for the Infinite Loop^™ full-scale manufacturing facilities. The engineering philosophy we have adopted is “design one, build many.” This approach allows for the basic design package to be used as the base engineering platform for all future geographical expansion. We believe this approach allows for quick execution, speed to market, and lends itself well to modular construction. The basic design package has a capacity of up to 70,000 M/T of rDMT and 23,000 M/T of rMEG, or 70,000 M/T of PET resin output per year. Permitting, site and regulatory considerations may impact plant capacity.

On May 1, 2024, we announced our strategic partnership with Ester to build and operate an Infinite Loop^™ manufacturing facility in India which will produce a unique product offering of lower carbon footprint rDMT, rMEG and specialty polymers, using the Infinite Loop^™ Technology. Loop has a well-established working relationship with Ester, which has nearly 40 years of specialized polymer production, operational proficiency, and local expertise, including sourcing of PET plastic and polyester fiber waste feedstocks. The rDMT and rMEG product offerings expected to be manufactured at the Infinite Loop^™ India facility represent a strategic product expansion in a low-cost manufacturing environment which complements Loop's existing PET plastic and polyester fiber manufacturing business and will fuel growth by addressing the large and growing demand in the market. We believe this expansion will enable the Infinite Loop^™ Technology to reach new markets and cater to a broader range of customers across multiple industries including electronics, automotive, textile, cosmetics and packaging.

The India facility will leverage the Infinite Loop^™ Technology and existing engineering package which should accelerate the lead-time towards groundbreaking, expected to occur by end of this year. Feedstock sourcing for the facility, in which there is abundant supply from textile waste in India, is well advanced and the partners have engaged an external firm to source and secure the land for the facility. Construction is expected to be completed by the end of 2026, with commercial operations commencing in early 2027. Loop will receive an annual technology license fee from the Infinite Loop^™ manufacturing facility in India.

We are also focused on our planned joint venture projects with SKGC in Asia and Europe to build and operate Infinite Loop^™ manufacturing facilities producing and selling Loop^™ PET resin and polyester fiber. These projects leverage SKGC’s engineering and operational infrastructure. In addition, the joint venture projects will provide Loop with an annual technology licensing fee. SKGC is committed to commercializing Loop’s technology as the underpinning of its sustainable plastics strategy. Loop is working collaboratively with SKGC to put in place a financing plan for the rollout of large-scale manufacturing in Asia and Europe, including the planned Asian manufacturing facility in Ulsan, South Korea.

The planned Infinite Loop^™ commercial manufacturing facility in Ulsan, South Korea, is expected to have an annual capacity to supply up to 70,000 metric tons per year of Loop^™ PET resin for packaging and polyester fiber applications, and was planned to break ground in the first half of 2024. The timing of the facility is currently under review by the partners while they evaluate opportunities to reduce capital costs and carry out discussions with the Korean government for subsidies related to the facility. Loop and SKGC are also evaluating the opportunity to build a monomer facility in order to capitalize on the large and growing market and attractive economics for DMT and MEG, including lower capital investment requirements for such a facility.

The global expansion plan for our technology will allow our customers, mostly comprised of CPG brand companies, apparel companies, and chemical companies, to integrate Loop^™ PET resin, polyester fiber rDMT and rMEG into their products and packaging. As countries around the globe continue to increase sustainability targets and recycled content mandates, our customers are increasing the use of sustainably produced materials into their products.

Our market strategy is to assist global consumer goods brands in meeting their public sustainability commitments by offering co-branded packaging or polyester fibers that are made with Loop 100% recycled, virgin-quality MEG, DMT, PET or polyester fibers. We believe that Loop^™ recycled PET resin and polyester fiber could command premium pricing over virgin, petroleum-based PET resin and provide attractive economic returns. We are targeting multi-year take or pay offtake agreements for planned Infinite Loop^™ production. Factors under consideration in determining project economics include the feasibility design engineering and cost estimate work, timing and permitting of a facility, customer offtake demand, commitment terms, and feedstock sources, quality, availability, PET bale index pricing, logistics, and ramp up, among others.

The Company’s ability to move to the next stage of its strategic development and construct manufacturing plants is dependent on, among other factors, whether the Company can obtain the necessary financing through a combination of the issuance of debt, equity, and/or joint ventures, and/or government incentive programs and/or customers.

RESULTS OF OPERATIONS

Fourth Quarter Ended February 29, 2024

The following table summarizes our operating results for the three-month periods ended February 29, 2024 and February 28, 2023, in U.S. Dollars.

Revenues

Revenues for the three-month period ended February 29, 2024 increased $33 to $45, as compared to $12 for the same period in 2023. The revenues resulted from the delivery of initial volumes to customers of Loop^™ PET resin produced using monomers manufactured at the Terrebonne Facility.

Research and Development

Research and development expenses for the three-month period ended February 29, 2024 increased $805 to $3,018, as compared to $2,213 for the same period in 2023. The increase was primarily attributable to a $866 increase in plant and laboratory operating expenses, which included an inventory write-down of $817 in the three-month period ended February 29, 2024 on finished goods and work in process inventories related to inventory volumes not expected to be sold in the next twelve months, and a $427 increase in external engineering expenses which included $504 related to the Infinite Loop^™ Europe project in the three-month period ended February 29, 2024. These increases were partially offset by a $309 decrease in employee compensation expenses, and a $101 decrease in stock-based compensation expenses.

General and administrative expenses

General and administrative expenses for the three-month period ended February 29, 2024 increased $22 to $2,221, as compared to $2,199 for the same period in 2023. The increase was primarily attributable to an increase of $266 in stock-based compensation expenses which was primarily attributable to restricted stock unit (“RSU”) forfeitures in the three-month period ended February 28, 2023. This increase was partially offset by a $100 decrease in employee compensation expenses.

Net Loss

The net loss for the three-month period ended February 29, 2024 increased $10,514 to $5,091 in the period, as compared to a net income of $5,423 for the same period in 2023. The increase was primarily due to a gain on disposition of assets of $9,980 related to the Company’s sale of land in Bécancour, Québec in the three-month period ended February 28, 2023, and the increase of $805 in research and development expenses.

Fiscal Year Ended February 29, 2024

The following table summarizes our operating results for the years ended February 29, 2024 and February 28, 2023, in U.S. Dollars.

Revenues

Revenues for the year ended February 29, 2024 decreased $20 to $153, as compared to $173 for the same period in 2023. The revenues resulted from the delivery of initial volumes to customers of Loop^™ PET resin produced using monomers manufactured at the Terrebonne Facility.

Research and Development

Research and development expenses for the year ended February 29, 2024 decreased $5,967 to $11,379, as compared to $17,346 for the same period in 2023. The decrease was primarily attributable to a $3,074 decrease in purchases of machinery and equipment for the Terrebonne Facility, a $2,672 decrease in employee compensation expenses including stock-based compensation, and a $920 decrease in external engineering costs for design work for our Infinite Loop^™ manufacturing process. These decreases were partially offset by a decrease in tax credits accounted for as a reduction of research and development expenses of $881.

General and administrative expenses

General and administrative expenses for the year ended February 29, 2024 decreased $10,441 to $9,988, as compared to $20,429 for the same period in 2023. The decrease was primarily attributable to a $7,869 decrease in stock-based compensation which is mostly related to a $7,740 expense recorded in relation to the achievement of a performance milestone for 1,000,000 RSUs in the year ended February 28, 2023, a $1,360 decrease in professional fees, and a $914 decrease in insurance costs.

Net Loss

The net loss for the year ended February 29, 2024 decreased $214 to $21,087, as compared to $21,301 for the same period in 2023. The decrease was primarily due to the $10,441 decrease in general and administrative expenses, and the $5,967 decrease in research and development expenses, as well as an increase in interest income of $517. The decrease in net loss was partially offset by a gain on disposition of assets of $16,683 recorded in the year ended February 28, 2023 related to the Company’s sale of land in Bécancour, Québec.

LIQUIDITY AND CAPITAL RESOURCES

Since its inception, the Company has been in the pre-commercialization stage with no material revenues, and its ongoing operations and commercialization plans have been financed primarily by raising equity. Therefore, the Company has incurred net losses and negative cash flow from operating and investing activities since its inception and expects to incur additional net losses while it continues to develop and plan for commercialization. To date, we have been successful in raising capital to finance our ongoing operations. Our liquidity position consists of cash and cash equivalents on hand of $6,958 at February 29, 2024 and an undrawn senior loan facility from a Canadian bank of $2,579. Our liquidity position is subject to risks and uncertainties, including those discussed under “Cautionary Statements Regarding Forward-Looking Statements” in this Annual Report on Form 10-K and the Risk Factors section included in Part I, Item 1A of this Annual Report on Form 10-K.

Management continuously monitors the Company’s cash resources against its short-term cash commitments to ensure there is sufficient liquidity to fund its costs for at least twelve months from the financial statement issuance date. Management evaluates the Company’s liquidity to determine if there is substantial doubt about its ability to continue as a going concern. In preparing this going concern assessment, management applies significant judgment in estimating future cash flow requirements of the Company based on budgets and forecasts, which includes developing assumptions related to the estimation of amount and timing of future cash outflows and inflows. Based on its assessment, management estimates that current available liquidity and forecasted net cash flows will not be sufficient to meet the Company’s obligations, commitments and budgeted expenditures the next twelve months from the consolidated financial statements issuance date. These events and conditions are material uncertainties that raise substantial doubt upon the Company’s ability to continue as a going concern and accordingly, the appropriateness of the use of accounting principles applicable to a going concern.

The Company’s ability to move to the next stage of its strategic development and construct manufacturing plants is dependent on, among other factors, whether the Company can obtain the necessary financing through a combination of the issuance of debt, equity, and/or joint ventures, and/or government incentive programs and/or customers. However, there is no assurance that the Company will be successful in attracting additional funding. Even if additional financing is available, it may not be available on terms favorable to the Company. Failure to secure additional financing on favorable terms when it becomes required would have an adverse effect on the Company’s financial position and on its ability to execute its business plan. The Company is seeking to finalize the negotiation of previously announced financing initiatives on acceptable terms, although there is no assurance it will succeed.

In December 2021, the Company entered into an agreement for the purchase of long-lead equipment for up to $8,546 which can be used in any Infinite Loop^™ manufacturing facility. As of February 29, 2024, the Company has paid an aggregate of $8,460 and has taken ownership of the long-lead equipment. This amount, along with engineering and development costs that have been and may continue to be incurred, is currently expected to be recovered from the JV Company when construction begins on the Infinite Loop^™ Ulsan facility. However, given that the construction of the Infinite Loop facility has not commenced, the total amounts incurred to date may not be reimbursed, therefore an amount of estimated recoverable amount of $16,000 has not been recognized in the financial statements included in this Annual Report on Form 10-K.

We have a long-term debt obligation to Investissement Québec in connection with a financing facility (the “Financing Facility”) for the expansion of the Terrebonne Facility up to a maximum of $3,390. We received the first disbursement in the amount of $1,628 on February 21, 2020 and the second disbursement in the amount of $1,762 on August 26, 2021. The loan can be repaid at any time by us without penalty. The loan’s interest rate was initially set at 2.36% and there was a 36-month moratorium on both capital and interest repayments as of the first disbursement date. Under the original terms of the financing facility, at the end of the 36-month moratorium, capital and interest was repayable in 84 monthly installments. There is no remaining amount available under the Financing Facility after the second disbursement.

On November 21, 2022, the Company and Investissement Québec entered into an agreement to amend the existing Financing Facility which modifies the repayments of the principal amount (the “Financing Facility Amendment”). As per the Financing Facility Amendment, a total of $37 of the principal amount was repaid in monthly installments in the fiscal year ended February 29, 2024 and the remainder of the principal amount is repayable in 72 monthly installments. The Financing Facility Amendment did not modify the interest rates, the repayment terms of accrued interest or any other terms of the Financing Facility.

On February 28, 2024, the Company and Investissement Québec entered into an agreement to amend the existing Financing Facility which modified the repayments of the principal amount (the “Second Financing Facility Amendment”). As per the Second Financing Facility Amendment, a total of $74 of the principal amount is repayable in monthly installments in the fiscal year ending February 28, 2025, with the remainder of the principal amount being repayable in 60 monthly installments. Pursuant to the Second Financing Facility Amendment the interest rate of the Financing Facility was increased from 2.36% to 3.36%. The Second Financing Facility Amendment did not modify the repayment terms of accrued interest or any of the other terms of the Financing Facility that are not mentioned above.

The amendments did not meet the criteria of ASC 470, Debt for an extinguishment of debt as the amendments did not substantially modify the terms of the Financing Facility. The Company therefore applied modification accounting and no immediate gain or loss was recognized related to the amendments.

Under the terms of the Financing Facility, Investissement Québec was also issued warrants to purchase shares of our common stock in an amount equal to 10% of each disbursement up to a maximum aggregate amount of $339. The warrants were issued at a price per share equal to the higher of (i) $11.00 per share and (ii) the ten-day weighted average closing price of Loop Industries shares of common stock on the Nasdaq stock market for the 10 days prior to the issue of the warrants. The warrants can be exercised immediately upon grant and have a term of three years from the date of issuance. On February 21, 2020, upon the receipt of the first disbursement under this facility, we issued a warrant to purchase 15,153 shares of common stock at a price of $11.00 to Investissement Québec, which expired in February 2023. On August 26, 2021, upon the receipt of the second disbursement under this facility, we issued a warrant to purchase 17,180 shares of common stock at a price of $11.00 to Investissement Québec, which remains outstanding.

On July 26, 2022, Loop Canada Inc., a wholly-owned subsidiary of the Company, entered into an Operating Credit Facility (the “Credit Facility”) with a Canadian bank. The Credit Facility allows for borrowings of up to $2,579 in aggregate principal amount and provides for a two-year term on amounts drawn. The Credit Facility is secured by the Company’s Terrebonne, Québec property and is subject to a minimum equity covenant, tested quarterly. All borrowings under the Credit Facility will bear interest at an annual rate equal to the bank’s Canadian prime rate (as defined in the Credit Facility) plus 1.0%. The Company is subject to a guarantee of the liabilities of Loop Canada. As at February 29, 2024, the Credit Facility was undrawn.

From time to time, we may engage in exchange rate hedging activities in an effort to mitigate the impact of exchange rate fluctuations. As part of our risk management program, we may enter into foreign exchange forward contracts to lock in the exchange rates for future foreign currency transactions, which is intended to reduce the variability of our operating costs and future cash flows denominated in currencies that differs from our functional currencies. We do not enter into these contracts for trading purposes or speculation, and our management believes all such contracts are entered into as hedges of underlying transactions.

In October 2022, the Company received a cash deposit from a customer of $1,000 in relation to an executed capacity reservation agreement. The deposit was intended to be credited against any future sales of Loop^™ PET resin over a five-year period, commencing two years after the first delivery of Loop^™ PET resin to the customer. Upon mutual agreement, the capacity reservation agreement with the customer was terminated on January 18, 2024. The customer and the Company agreed for the deposit to be refunded in full on July 1, 2027, with no restriction on the Company’s use of the funds. The amount bears no interest. The cause of the termination is related to the customer’s decision to abandon its plans to incorporate rPET in its products for technical reasons.

The following table summarizes the exchange rates used:

Expenditures are translated at the average exchange rate for the period presented.

Flow of Funds

Summary of Cash Flows

A summary of cash flows for the years ended February 29, 2024, and February 28, 2023 in U.S. dollars was as follows:

Net Cash Used in Operating Activities

During the year ended February 29, 2024, we used $18,034 in operations compared to $34,892 during the year ended February 28, 2023. As discussed above in the Results of Operations, the year-over-year decrease was mainly due to decreased operating expenses as we have completed the upgrade of the Terrebonne Facility and our basic design package for the Infinite Loop^™ full-scale manufacturing facilities, in addition to decreased general and administrative expenses.

Net Cash Used in Investing Activities

During the year ended February 29, 2024, we used $5,644 in investing activities compared to cash provided from investing activities of $21,279 during the year ended February 28, 2023. During the year ended February 29, 2024, cash used for the purchase of long-lead equipment amounted to $5,065, as compared to $594 during the year ended February 28, 2023. During the year ended February 29, 2024, we made investments in intangible assets of $482, as compared to $360 during the year ended February 28, 2023, particularly in our patent technology in the United States and around the world. During the year ended February 28, 2023, we sold land in Bécancour, Québec for cash proceeds of $22,314.

Net Cash Used in Financing Activities

During the year ended February 28, 2023, we received a customer deposit of $1,000 in relation to an executed capacity reservation agreement which was terminated on January 18, 2024. The customer and the Company agreed for the deposit to be refunded in full on July 1, 2027, with no restriction on the Company’s use of the funds. The amount bears no interest. The cause for the termination is related to the customer’s decision to abandon its plans to incorporate rPET in its products for technical reasons.

In the year ended February 29, 2024, we made repayments of long-term debt of $63 as compared to nil in the year ended February 28, 2023.

OUTLOOK

In connection with the upcoming fiscal year ending February 28, 2025, we intend to continue to execute our corporate strategy. We believe we must execute on several areas of our operational strategic plan, namely:

Risks that may affect our ability to execute on this strategy include, but are not limited to, those listed under “Risk Factors” elsewhere in this Annual Report on Form 10-K.

CRITICAL ACCOUNTING ESTIMATES

The preparation of financial statements in conformity with US GAAP requires management to use its judgment to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosures of contingent assets and liabilities at the date of the financial statements and the reported amounts of expenses during the reporting period. Actual results could differ from those estimates. We believe that the accounting policies discussed below are critical to understanding our historical and future performance, as these policies relate to the more significant areas involving management’s judgments and estimates.

Going Concern

These consolidated financial statements have been prepared using accounting principles generally accepted in the United States of America applicable to a going concern, which contemplate the realization of assets and settlement of liabilities in the normal course of business as they come due. In assessing whether the going concern assumption is appropriate, management takes into account all available information about the future, which is at least, but not limited to, twelve months from the date of issuance of these consolidated financial statements.

Since its inception, the Company has been in the pre-commercialization stage with no material revenues from customers, and its ongoing operations and commercialization plans have been financed primarily by raising equity. Therefore, the Company has incurred net losses and negative cash flow from operating and investing activities since its inception and expects to incur additional net losses while it continues to develop and plan for commercialization. As at February 29, 2024, the Company’s available liquidity was $9,537, consisting of cash and cash equivalents of $6,958 and an undrawn senior loan facility from a Canadian bank of $2,579.

Management continuously monitors the Company’s cash resources against its short-term cash commitments to ensure there is sufficient liquidity to fund its costs for at least twelve months from the financial statement issuance date. Management evaluates the Company’s liquidity to determine if there is substantial doubt about its ability to continue as a going concern. In preparing this going concern assessment, management applies significant judgment in estimating future cash flow requirements of the Company based on budgets and forecasts, which includes developing assumptions related to the estimation of amount and timing of future cash outflows and inflows. Based on its assessment, management estimates that current available liquidity and forecasted net cash flows will not be sufficient to meet the Company’s obligations, commitments and budgeted expenditures the next twelve months from the consolidated financial statements issuance date. These events and conditions are material uncertainties that raise substantial doubt upon the Company’s ability to continue as a going concern and accordingly, the appropriateness of the use of accounting principles applicable to a going concern.

The Company’s ability to move to the next stage of its strategic development and construct manufacturing plants is dependent on, among other factors, whether the Company can obtain the necessary financing through a combination of the issuance of debt, equity, and/or joint ventures, and/or government incentive programs and/or customers. However, there is no assurance that the Company will be successful in attracting additional funding. Even if additional financing is available, it may not be available on terms favorable to the Company. Failure to secure additional financing on favorable terms when it becomes required would have an adverse effect on the Company’s financial position and on its ability to execute its business plan. The Company is seeking to finalize the negotiation of previously announced financing initiatives on acceptable terms.

These consolidated financial statements do not reflect the adjustments to the carrying values of assets and liabilities and the reported expenses and balance sheet classifications that would be necessary if the Company were unable to realize its assets and settle its liabilities as a going concern in the normal course of operations. Such adjustments could be material.

Stock-Based Compensation

The Company periodically issues stock options, warrants and restricted stock units to employees and non-employees in non-capital raising transactions for services and financing expenses. The Company accounts for stock options granted to employees based on the authoritative guidance provided by the Financial Accounting Standards Board (the “FASB”) wherein the fair value of the award is measured on the grant date and recognized as compensation expense on the straight-line basis over the vesting period. When performance conditions exist, the Company recognizes compensation expense when it becomes probable that the performance condition will be met. Forfeitures on share-based payments are recognized as they occur.

The Company accounts for stock options and warrants granted to non-employees in accordance with the authoritative guidance of the FASB wherein the fair value of the stock compensation is based upon the measurement date determined as the earlier of the date at which either a) a commitment is reached with the counterparty for performance or b) the counterparty completes its performance.

The Company estimates the fair value of restricted stock unit awards to employees and directors based on the closing market price of its common stock on the date of grant.

The fair value of the stock options granted is estimated using the Black-Scholes model, which uses certain assumptions related to risk-free interest rates, expected volatility, expected life of the stock options, and future dividends. Stock-based compensation expense is recorded based on the value derived from the Black-Scholes model and on actual experience. The assumptions used in the Black-Scholes model could materially affect stock-based compensation expenses recorded in the current and future periods.

Inventories

Inventories are stated at the lower of cost or net realizable value using the average cost method. Inventory cost includes direct labor, cost of raw materials and production overhead.

The Company separates its inventories into three main categories: raw materials, work in process, and finished goods. The raw materials category includes goods used in the production process that have not yet entered the production process at the balance sheet date and mainly comprises chemicals and other process consumables. The work in process category includes goods that are in the production process at the balance sheet date and mainly comprises recycled monomers that have not yet been polymerized into Loop™ branded PET resin. The finished goods category includes goods that have completed the production process at the balance sheet date and mainly comprises Loop™ branded PET resin.

The Company is still within the pre-commercialization phase and as such, the cost of producing inventory currently exceeds its net realizable value. In determining the net realizable value of inventory, management applies significant judgements about the future selling price, expected costs to be incurred in the sale of the finished goods, and expected volumes to be sold.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Pursuant to SEC Release No. 33-8876, we are permitted to use the scaled disclosure requirements applicable to a “smaller reporting company,” as defined in Rule 12b-2 of the Exchange Act, and therefore, we are not required to provide the information called for by this Item.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Loop Industries, Inc.

February 29, 2024

Index to the Consolidated Financial Statements

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Stockholders of Loop Industries, Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Loop Industries, Inc. and its subsidiaries (together, the Company) as of February 29, 2024 and February 28, 2023, and the related consolidated statements of operations and comprehensive loss, changes in stockholders’ equity and cash flows for the years then ended, including the related notes (collectively referred to as the consolidated financial statements). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of February 29, 2024 and February 28, 2023, and the results of its operations and its cash flows for the years then ended in conformity with accounting principles generally accepted in the United States of America.

Substantial Doubt About the Company’s Ability to Continue as a Going Concern

The accompanying consolidated financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 1 to the consolidated financial statements, the Company has incurred net losses and negative cash flow from operating and investing activities since its inception that and has stated that these events or conditions indicate that a material uncertainty exists that raises substantial doubt about its ability to continue as a going concern. Management’s plans in regard to these matters are also described in Note 1. The consolidated financial statements do not include any adjustments that might result from the outcome of this uncertainty. This matter is also described in the Critical Audit Matters section of our report.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits of these consolidated financial statements in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matters

The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that (i) relates to accounts or disclosures that are material to the consolidated financial statements and (ii) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Going Concern Assessment

As described in note 1 to the consolidated financial statements, the Company’s consolidated financial statements have been prepared on a going concern basis. For the year ended February 29, 2024, the Company incurred a net loss of $21.1 million and the net cash flows used from operating activities was $18.0 million. As of February 29, 2024, the Company’s available liquidity was $9.5 million, consisting of cash and cash equivalents of $6.9 million and an undrawn senior loan facility from a Canadian bank of $2.6 million. Management estimates that current available liquidity and forecasted net cash flows will not be sufficient to meet the Company’s obligations, commitments and budgeted expenditures for the next twelve months from the consolidated financial statements issuance date. Management evaluates the Company’s liquidity to determine if there is substantial doubt about the Company’s ability to continue as a going concern. In preparing this going concern assessment, management applies significant judgment in estimating future cash flow requirements of the Company based on budgets and forecasts, which includes developing assumptions related to the estimation of amount and timing of future cash outflows and inflows. This matter is also described in the Substantial Doubt About the Company’s Ability to Continue as a Going Concern section of our report.

The principal considerations for our determination that performing procedures relating to the going concern assessment is a critical audit matter are the significant judgment by management in estimating future cash flow requirements of the Company based on budgets and forecasts, which includes developing assumptions related to the estimation of amount and timing of future cash outflows and inflows. This in turn led to a high degree of auditor judgment, subjectivity and effort in performing procedures and evaluating audit evidence related to management’s estimation of amount and timing of future cash outflows and inflows.

Addressing the matter involved performing procedures and evaluating audit evidence in connection with forming our overall opinion on the consolidated financial statements. These procedures included, among others, evaluating management’s assessment of whether the Company has sufficient cash resources for the next 12 months from the date of the issuance of the consolidated financial statements. This included (i) testing the completeness and accuracy of the underlying data used in management’s estimation of future cash flow requirements; and (ii) evaluating the reasonableness of management’s assumptions related to the estimation of the amount and timing of future cash outflows and inflows. The evaluation of these assumptions considered (i) management’s historical accuracy in forecasting cash flows and settling budgets; and (ii) whether these assumptions were consistent with evidence obtained in other areas of the audit. Additionally, these procedures included evaluating the sufficiency of the Company’s going concern disclosure.

/s/ PricewaterhouseCoopers LLP

We have served as the Company’s auditor since 2017.

Loop Industries, Inc.

Consolidated Balance Sheets

See accompanying notes to the consolidated financial statements.

Loop Industries, Inc.

Consolidated Statements of Operations and Comprehensive Loss

See accompanying notes to the consolidated financial statements.

Loop Industries, Inc.

Consolidated Statements of Changes in Stockholders’ Equity

For the Years Ended February 29, 2024 and February 28, 2023

(in United States dollars)