You should carefully consider the following risk factors before making an investment decision. If any of the following risks actually occur, our business, financial condition, or results of operations could be materially and adversely affected. In such cases, the trading price of our common stock could decline, and you may lose all or part of your investment.
We have incurred losses and anticipate continued losses and negative cash flow.
We have transitioned from a research and development company to a commercial products manufacturer, services provider and developer. We have not been profitable since our year ended October 31, 1997. We expect to continue to incur net losses and generate negative cash flows until we can produce sufficient revenues and margins to cover our costs. We may never become profitable. Even if we do achieve profitability, we may be unable to sustain or increase our profitability in the future. For the reasons discussed in more detail below, there are substantial uncertainties associated with our achieving and sustaining profitability. We have, from time to time, sought financing in the public markets in order to fund operations and will continue to do so. Our future ability to obtain such financing could be impaired by a variety of factors, including, but not limited to, the price of our common stock and general market conditions.
Our cost reduction strategy may not succeed or may be significantly delayed, which may result in our inability to deliver improved margins.
Our cost reduction strategy is based on the assumption that increases in production will result in economies of scale. In addition, our cost reduction strategy relies on advancements in our manufacturing process, global competitive sourcing, engineering design, reducing the cost of capital and technology improvements (including stack life and projected power output). Failure to achieve our cost reduction targets could have a material adverse effect on our results of operations and financial condition.
Our announced workforce reduction may cause undesirable consequences and our results of operations may be harmed.
On December 1, 2016, we announced a workforce reduction of 17%, or 96 employees. This workforce reduction may yield unintended consequences, such as attrition beyond our intended reduction in workforce and reduced employee morale, which may cause our employees who were not affected by the reduction in workforce to seek alternate employment. Additional attrition could impede our ability to meet our operational goals, which could have a material adverse effect on our financial performance. In addition, as a result of the reductions in our workforce, we may face an increased risk of employment litigation. Furthermore, employees whose positions will be eliminated in connection with these trends may seek future employment with our competitors. Although all our employees are required to sign a confidentiality agreement with us at the time of hire, we cannot assure you that the confidential nature of our proprietary information will be maintained in the course of such future employment. We cannot assure you that we will not undertake additional reduction activities, that any of our efforts will be successful, or that we will be able to realize the cost savings and other anticipated benefits from our previous or any future reduction plans. In addition, if we continue to reduce our workforce, it may adversely impact our ability to respond rapidly to any new product, growth or revenue opportunities.
We have debt outstanding and may incur additional debt in the future, which may adversely affect our financial condition and future financial results.
Our total consolidated indebtedness was $87.8 million as of April 30, 2017. This includes approximately $47.1 million of debt at our project finance subsidiaries and $40.7 million at the corporate level. The major
ity of our debt is long-term with $14.6 million due within twelve months. We also have approximately $40.0 million of borrowing capacity under a revolving construction and term project financing facility. Our ability to make
scheduled payments of the principal and interest or to refinance our indebtedness depends on our future performance, which is subject to economic, financial, competitive and other factors beyond our control. Our business may not generate cash flow from operations in the future sufficient to service our debt and make necessary capital expenditures. If we are unable to generate such cash flow, we may be required to adopt one or more alternatives, such as selling assets, restructuring debt or obtaining additional equity capital on terms that may be onerous or dilutive.
37
It is also possible that we may incur additional indebtedness in the future in the ordinary course of business. If new debt is added to current debt levels, the risks described above could intensify.
Our debt agreements contain customary representations and warranties, affirmative and negative covenants, and events of default that entitle the lenders to cause our indebtedness under the loan and security agreement to become immediately due and payable. In addition, our Loan and Security Agreement with Hercules Capital, Inc. contains a financial covenant whereby the Company is required to maintain an unrestricted cash balance of at least (a) 75% of the outstanding Loan balance plus (b) the amount of accounts payable (as defined under accounting principles generally accepted in the United States (“GAAP”) not paid within 90 days of the date payment was issued. As of April 30, 2017 the outstanding loan balance with Hercules Capital, Inc. was $21.0 million, including accretion of an end-of-term charge.
Our products compete with products using other energy sources, and if the prices of the alternative sources are lower than energy sources used by our products, sales of our products will be adversely affected. Volatility of electricity and fuel prices may impact sales of our products and services in the markets in which we compete.
Our products can operate using a variety of fuels, including primarily natural gas and biogas and also methanol, diesel, coal gas, coal mine methane, and propane. If these fuels are not readily available or if their prices increase such that electricity produced by our products costs more than electricity provided by other generation sources, our products would be less economically attractive to potential customers. In addition, we have no control over the prices of several types of competitive energy sources such as oil, gas or coal as well as local utility electricity costs. Significant decreases (or short term increases) in the price of these fuels or grid delivered prices for electricity could also have a material adverse effect on our business because other generation sources could be more economically attractive to consumers than our products.
The reduction or elimination of government subsidies and economic incentives for alternative energy technologies, including our fuel cell power plants, could reduce demand for our products and services, lead to a reduction in our revenues and adversely impact our operating results.
We believe that the near-term growth of alternative energy technologies, including our fuel cells, relies on the availability and size of government and economic incentives (including, but not limited to, the U.S. Federal investment tax credit (ITC), the incentive programs in South Korea and state renewable portfolio standard programs). The U.S. Federal Government extends an investment tax credit (ITC) that allows a taxpayer to claim a credit of 30% of qualified expenditures (up to a tax credit limit of $3,000/kW) for eligible power generation technologies. In December 2015, the United States Congress extended the ITC for 5 years, beginning January 1, 2017. The intention, as publicly stated by Congressional leaders, was to extend the ITC to all eligible technologies; however, the actual approved language only extended the ITC for solar energy technologies. As of January 1, 2017, fuel cells and a number of other power generation technologies are no longer eligible for the ITC. Based on numerous public comments by leaders and members of Congress in the media and in the Congressional Record that the omission was an oversight that will be corrected, the fuel cell industry is continuing outreach to ensure parity of domestically designed and manufactured fuel cells with solar technologies. There can be no assurance regarding the timing of and ultimate passage of a bill to extend the ITC.
Other government incentives expire, phase out over time, exhaust the allocated funding, or require renewal by the applicable authority. In addition, these incentive programs could be challenged by utility companies, or be found to be unconstitutional, and/or could be reduced or discontinued for other reasons.
Further, the recent presidential and congressional elections in the United States could result in significant changes in, and uncertainty with respect to, legislation, regulation and government policy. While it is not possible to predict whether and when any such changes will occur, changes at the local, state or federal level could impact fuel cell market adoption in the USA and the alternative energy technologies sector in the USA, generally. Specific legislative and regulatory proposals discussed during and after the election that could have a material impact on us include, but are not limited to, reform of the federal tax code; infrastructure renewal programs; and modifications to international trade policy, public company reporting requirements, environmental regulation and antitrust enforcement.
We are currently unable to predict whether reform discussions will meaningfully change existing legislative and regulatory environments relevant for our business, or if any such changes would have a net positive or negative impact on our business. To the extent that such changes have a negative impact on us or the industries we serve, including as a result of related uncertainty, these changes may materially and adversely impact our business, financial condition, results of operations and cash flows.
38
Financial markets worldwide have experienced heightened volatility and
instability which may have a material adverse impact on our Company, our customers and our suppliers.
Financial market volatility can affect both the debt, equity and project finance markets. This may impact the amount of financing available to all companies, including companies with substantially greater resources, better credit ratings and more successful operating histories than ours. It is impossible to predict future financial market volatility and instability and the impact on our Company and it may have a materially adverse effect on us for a number of reasons, such as:
|
|
|
|
|
•
|
|
The long term nature of our sales cycle can require long lead times between application design, order booking and product fulfillment. For this, we often require substantial cash down payments in advance of delivery. Our growth strategy assumes that financing will be available for the Company to finance working capital or for our customers to provide down payments and to pay for our products. Financial market issues may delay, cancel or restrict the construction budgets and funds available to the Company or our customers for the deployment of our products and services.
|
|
|
|
|
|
•
|
|
Projects using our products are, in part, financed by equity investors interested in tax benefits as well as by the commercial and governmental debt markets. The significant volatility in the U.S. and international stock markets cause significant uncertainty and may result in an increase in the return required by investors in relation to the risk of such projects.
|
|
|
|
|
|
•
|
|
If we, our customers and suppliers cannot obtain financing under favorable terms, our business may be negatively impacted.
|
Our contracted projects may not convert to revenue, and our project pipeline may not convert to contracts, which may have a material adverse effect on our revenue and cash flow.
Some of the orders we accept from customers require certain conditions or contingencies (such as permitting, interconnection or financing) to be satisfied, some of which are outside of our control. The time periods from receipt of a contract to installation may vary widely and are determined by a number of factors, including the terms of the customer contract and the customer’s site requirements. This could have an adverse impact on our revenue and cash flow.
We have signed product sales contracts, engineering, procurement and construction contracts (EPC), power purchase agreements and long-term service agreements with customers subject to contractual, technology and operating risks as well as market conditions that may affect our operating results.
The Company applies the percentage of completion revenue recognition method to certain product sales contracts which are subject to estimates. On a quarterly basis, the Company performs a review proc
ess to help ensure that
total estimated contract costs include estimates of costs to complete that are based on the most recent available information. The percentage of completion for the customer contracts based on this cost analysis is then applied to the total customer contract values to determine the total revenue to be recognized to date.
In certain instances, we have executed power purchase agreements (PPA) with the end-user of the power and site host of the fuel cell power plant. We may then sell the PPA to a project investor or retain the project and collect revenue from the sale of power over the term of the PPA, recognizing electricity revenue as power is generated and sold.
We have contracted under long-term service agreements with certain customers to provide service on our products over terms up to 20 years. Under the provisions of these contracts, we provide services to maintain, monitor, and repair customer power plants to meet minimum operating levels. Pricing for service contracts is based upon estimates of future costs including future stack replacements. While we have conducted tests to determine the overall life of our products, we have not run our products over their projected useful life prior to large-scale commercialization. As a result, we cannot be sure that our products will last to their expected useful life, which could result in warranty claims, performance penalties, maintenance and stack replacement costs in excess of our estimates and losses on service contracts.
We extend product warranties, which could affect our operating results.
We provide for a warranty of our products for a specific period of time against manufacturing or performance defects. We accrue for warranty costs based on historical warranty claim experience, however actual future warranty expenses may be greater than we have assumed in our estimates. As a result, operating results could be negatively impacted should there be product manufacturing or performance defects in excess of our estimates.
39
Our products
are complex and could contain defects and may not operate at expected performance levels which could impact sales and market adoption of our products or result in claims against us.
We develop complex and evolving products and we continue to advance the capabilities of the fuel cell stacks and are now producing stacks with a net rated power output of 350 kW and an expected five year life.
We are still gaining field operating experience on our products, and despite experience gained from our growing installed base and testing performed by us, our customers and our suppliers, issues may be found in existing or new products. This could result in a delay in recognition or loss of revenues, loss of market share or failure to achieve broad market acceptance. The occurrence of defects could also cause us to incur significant warranty, support and repair costs, could divert the attention of our engineering personnel from our product development efforts, and could harm our relationships with our customers. The occurrence of these problems could result in the delay or loss of market acceptance of our products and would likely harm our business. Defects or performance problems with our products could result in financial or other damages to our customers. From time to time, we have been involved in disputes regarding product warranty issues. Although we seek to limit our liability, a product liability claim brought against us, even if unsuccessful, would likely be time consuming and could be costly to defend. Our customers could also seek and obtain damages from us for their losses. We have accrued liabilities for potential damages related to performance problems, however actual results may be different than the assumptions used in our accrual calculations.
We currently face and will continue to face significant competition.
We compete on the basis of our products’ reliability, efficiency, environmental considerations and cost. Technological advances in alternative energy products or improvements in the electric grid or other sources of power generation, or other fuel cell technologies may negatively affect the development or sale of some or all of our products or make our products non-competitive or obsolete prior to commercialization or afterwards. Other companies, some of
which have substantially greater resources than ours, are currently engaged in the
development of products and technologies that are similar to, or may be competitive with, our products and technologies.
Several companies are involved in fuel cell development, although we believe we are the only domestic company engaged in significant manufacturing and commercialization of carbonate fuel cells. Emerging fuel cell technologies (and companies developing them) include PEM stationary fuel cells (Ballard Power Systems, Inc. and Plug Power), phosphoric acid fuel cells (Doosan Fuel Cells America) and solid oxide fuel cells (LG/Rolls Royce partnership, GE and Bloom Energy). Each of these competitors has the potential to capture market share in our target markets. There are also other potential fuel cell competitors internationally that could capture market share.
Other than fuel cell developers, we must also compete with companies that manufacture more mature combustion-based equipment, including various engines and turbines, and have well-established manufacturing, distribution, and operating and cost features. Electrical efficiency of these products can be competitive with our SureSource power plants in certain applications. Significant competition may also come from gas turbine companies.
We derive significant revenue from contracts awarded through a competitive bidding process involving substantial costs and risks. Due to this competitive pressure, we may be unable to grow revenue and achieve profitability.
We expect a significant portion of the business that we will seek in the foreseeable future will be awarded through competitive bidding versus other fuel cell technologies and other forms of power generation. The competitive bidding process involves substantial costs and a number of risks, including the significant cost and managerial time to prepare bids and proposals for contracts that may not be awarded to us and our failure to accurately estimate the resources and costs that will be required to fulfill any contract we win. In addition, following a contract award, we may encounter significant expense, delay or contract modifications as a result of our competitors protesting or challenging contracts awarded to us in competitive bidding. In addition, multi-award contracts require that we make sustained post-award efforts to obtain task orders under the contract. We may not be able to obtain task orders or recognize revenue under these multi-award contracts. Our failure to compete effectively in this procurement environment would adversely affect our revenue and/or profitability.
We have two large and influential stockholders, which may make it difficult for a third party to acquire our common stock.
POSCO Energy currently owns approximately 5% of our outstanding common stock and NRG Energy owns approximately 3% of our outstanding common stock, which could make it difficult for a third party to acquire our common stock. POSCO Energy is also a licensee of our technology and purchaser of our products and NRG is a purchaser of our products. Therefore, it may be in their interest to exert their substantial influence over matters concerning our overall strategy and technological and commercial development.
40
Unanticipated increases or decreases in business growth may result i
n adverse financial consequences for us.
If our business grows more quickly than we anticipate, our existing and planned manufacturing facilities may become inadequate and we may need to seek out new or additional space, at considerable cost to us. If our business does not grow as quickly as we expect, our existing and planned manufacturing facilities would, in part, represent excess capacity for which we may not recover the cost; in that circumstance, our revenues may be inadequate to support our committed costs and our planned growth, and our gross margins, and business strategy would be adversely affected.
Our plans are dependent on market acceptance of our products.
Our plans are dependent upon market acceptance of, as well as enhancements to, our produc
ts. Fuel cell systems represent an emerging market, and we cannot be sure that potential customers will accept fuel cells as a
replacement for traditional power sources. As is typical in a rapidly evolving industry, demand and market acceptance for recently introduced products and services are subject to a high level of uncertainty and risk. Since the distributed generation market is still evolving, it is difficult to predict with certainty the size of the market and its growth rate. The development of a market for our products may be affected by many factors that are out of our control, including:
|
|
|
|
|
•
|
|
the cost competitiveness of our fuel cell products including availability and output expectations and total cost of ownership;
|
|
|
|
|
|
•
|
|
the future costs of natural gas and other fuels used by our fuel cell products;
|
|
|
|
|
|
•
|
|
customer reluctance to try a new product;
|
|
|
|
|
|
•
|
|
the market for distributed generation;
|
|
|
|
|
|
•
|
|
local permitting and environmental requirements; and
|
|
|
|
|
|
•
|
|
the emergence of newer, more competitive technologies and products.
|
If a sufficient market fails to develop or develops more slowly than we anticipate, we may be unable to recover the losses we will have incurred in the development of our products and may never achieve profitability.
As we continue to expand markets for our products, we intend to continue offering power production guarantees and other terms and conditions relating to our products that will be acceptable to the marketplace, and continue to develop a service organization that will aid in servicing our products and obtain self-regulatory certifications, if available, with respect to our products. Failure to achieve any of these objectives may also slow the development of a sufficient market for our products and, therefore, have a material adverse effect on our results of operations and financial condition.
We are substantially dependent on a concentrated number of customers and the loss of any one of these customers could adversely affect our business, financial condition and results of operations.
We contract with a concentrated number of customers for the sale of products and for research and development contracts. This includes POSCO Energy, which is a related party and owns approximately 5% of the outstanding common shares of the Company. POSCO Energy accounted for 48% of the Company’s total revenues in fiscal year 2016.
There can be no assurance that we will continue to achieve the current level of sales of our products to our largest customers. Even though our customer base is expected to increase and our revenue streams to diversify, a substantial portion of net revenues could continue to depend on sales to a limited number of customers. Our agreements with these customers may be canceled if we fail to meet certain product specifications or materially breach the agreements, and our customers may seek to renegotiate the terms of current agreements or renewals. The loss of, or a reduction in sales to, one or more of our larger customers could have a material adverse effect on our business, financial condition and results of operations.
As our relationship with POSCO Energy changes, we may not be able to succeed in our efforts to access the Asian markets.
We entered into manufacturing and technology transfer agreements 2007, 2009 and 2012 with POSCO Energy. The Cell Technology Transfer Agreement (“CTTA”), executed in October 2012, provides POSCO Energy with the technology to manufacture SureSource power plants in South Korea and the market access to sell power plants throughout Asia. In October 2016, the Company and POSCO Energy extended the terms of the 2007 and 2009 license agreements to be consistent with the term of the CTTA which expires on October 31, 2027. The term of these agreements may be extended beyond 2027 through future extensions, each for a period of five (5) years, by mutual agreement of the Company and POSCO Energy. In conjunction with the CTTA, the Company receives a 3.0% royalty on POSCO Energy net product sales as well as a royalty on each scheduled
fuel cell module replacement under service agreements for modules that were built by POSCO Energy and installed at any plant in Asia under terms of the Master Service
41
Agreement betwee
n the Company and POSCO Energy. As a result, we have been historically reliant on POSCO Energy to develop and grow the Asian market. In March 2017, we entered into a memorandum of understanding in the POSCO Energy to permit us to directly develop the Asian
fuel cell business, including the
right for us to sell SureSource
solutions in Korea and the broader Asian market. We and POSCO Energy also agreed to undertake to amend the CTTA and other agreements by September 30, 2017, to reflect our new relationship.
The Korean and Asian markets are complex and we may not succeed in our efforts to access them independently. Any new or amended agreements with POSCO Energy may be on terms that are less favorable than existing agreements.
If our goodwill and other intangible assets, long-lived assets, inventory or project assets become impaired, we may be required to record a significant charge to earnings.
We may be required to record a significant charge to earnings in our financial statements should we determine that our goodwill, other intangible assets (i.e., in process research and development (“IPR&D”)), long-lived assets (i.e., property, plant and equipment), inventory, or project assets are impaired. Such a charge might have a significant impact on our reported financial position and results of operations.
As required by accounting rules, we review our goodwill for impairment at least annually as of July 31 or more frequently if facts and circumstances indicate that it is more likely than not that the fair value of a reporting unit that has goodwill is less than its carrying value. Factors that may be considered a change in circumstances indicating that the carrying value of our goodwill might not be recoverable include a significant decline in projections of future cash flows and lower future growth rates in our industry. We review IPR&D for impairment on an annual basis. If the technology has been determined to be abandoned or not recoverable, we would be required to impair the asset. We review inventory and project assets for impairment whenever events or changes in circumstances indicate that the carrying amount may not be recoverable. We consider a project commercially viable and recoverable if it is anticipated to be sellable for a profit once it is either fully developed or fully constructed. If our projects are not considered commercially viable, we would be required to impair the respective project assets.
We have risks associated with high levels of inventory.
The amount of total inventory as of April 30, 2017 and October 31, 2016 was $75.6 million and $73.8 million, respectively, which includes work in process inventory totaling $51.3 million and $48.5 million, respectively. We have recently reduced our production rate and expect to operate a lower level for a period of time in order to deploy inventory to new projects and mitigate future increases in inventory. There is no guarantee, however, that will be successful in deploying our existing inventory. In addition, there are risks that our inventory could lose some or all of its value due to technological obsolescence, shifts in market demand or other unexpected changes in industry conditions and circumstances. If we are unable to deploy our current inventory consistent with our business plan, we may be required to sell it at a loss, abandon it or recycle it onto different products. These actions would result in a significant charge to earnings. Such a charge might have a significant impact on our financial position and results of operations. See “—If our goodwill and other intangible assets, long-lived assets, inventory or project assets become impaired, we may be required to record a significant charge to earnings.” In addition, even if we are able to successfully deploy existing inventory, we may experience future high levels of inventory in the future due to cancelled projects, loss of a customer, shift in market demand or other unexpected changes in industry conditions and circumstances.
Our advanced technologies contracts are subject to the risk of termination by the contracting party and we may not realize the full amounts allocated under the contracts due to the lack of Congressional appropriations.
A portion of our fuel cell revenues have been derived from long-term cooperative agreements and other contrac
ts with the U.S. Department of Energy and other U.S. Government agencies. These agreements are important to the
continued development of our technology and our products. We also contract and partner with private sector companies under certain Advanced Technology contracts to develop strategically important and complementary offerings.
Generally, our government research and development contracts are subject to the risk of termination at the convenience of the contracting agency. Furthermore, these contracts, irrespective of the amounts allocated by the contracting agency, are subject to annual Congressional appropriations and the results of government or agency sponsored reviews and audits of our cost reduction projections and efforts. We can only receive funds under these contracts ultimately made available to us annually by Congress as a result of the appropriations process. Accordingly, we cannot be sure whether we will receive the full amounts awarded under our government research and development or other contracts. Failure to receive the full amounts under any of our government research and development contracts could materially and adversely affect our business prospects, results of operations and financial condition.
42
A negative government audit could res
ult in an adverse adjustment of our revenue and costs and could result in civil and criminal penalties.
Government agencies, such as the Defense Contract Audit Agency, routinely audit and investigate government contractors. These agencies review a contractor’s performance under its contracts, cost structure, and compliance with applicable laws, regulations, and standards. If the agencies determine through these audits or reviews that we improperly allocated costs to specific contracts, they will not reimburse us for these costs. Therefore, an audit could result in adjustments to our revenue and costs.
Further, although we have internal controls in place to oversee our government contracts, no assurance can be given that these controls are sufficient to prevent isolated violations of applicable laws, regulations and standards. If the agencies determine that we or one of our subcontractors engaged in improper conduct, we may be subject to civil or criminal penalties and administrative sanctions, payments, fines, and suspension or prohibition from doing business with the government, any of which could materially affect our results of operations and financial condition.
The U.S. government has certain rights relating to our intellectual property, including restricting or taking title to certain patents.
Multiple U.S. patents that we own have resulted from government-funded research and are subject to the risk of exercise of “march-in” rights by the government. March-in rights refer to the right of the U.S. government or a government agency to exercise its non-exclusive, royalty-free, irrevocable worldwide license to any technology developed under contracts funded by the government if the contractor fails to continue to develop the technology. These “march-in” rights permit the U.S. government to take title to these patents and license the patented technology to third parties if the contractor fails to utilize the patents.
We are classified for Government contracting as a “Large Business”, which could adversely affect our rights to own future patents under DOE-funded contracts.
We are classified as a “large business” under DOE contracts. This allows us to own the patents that we develop under new DOE contracts if we obtain a waiver from DOE. A “large business” under applicable government regulations generally consists of more than 500 employees averaged over a one year period. We will not own future patents we develop under new contracts, grants or cooperative agreements funded by the DOE, unless we obtain a patent waiver from the DOE. Should we not obtain a patent waiver and outright ownership, we would nevertheless retain exclusive rights to any such patents, so long as we continue to commercialize the technology covered by the patents.
Our future success and growth is dependent on our market strategy.
We cannot assure you that we will enter into partnerships that are consistent with, or sufficient to support, our commercialization plans, and our growth strategy or that these relationships will be on terms favorable to
us.
Even if we enter into these types of relationships, we cannot assure you that the partners with which we form relationships will focus adequate resources on selling our products or will be successful in selling them. Some of these arrangements have or will require that we grant exclusive rights to companies in defined territories. These exclusive arrangements could result in our being unable to enter into other arrangements at a time when the partner with which we form a relationship is not successful in selling our products or has reduced its commitment to marketing our products. In addition, future arrangements may also include the issuance of equity and warrants to purchase our equity, which may have an adverse effect on our stock price. To the extent we enter into partnerships or relationships, the failure of these partners to assist us with the deployment of our products may adversely affect our results of operations and financial condition.
We depend on third party suppliers for the development and supply of key raw materials and components for our products.
We use various raw materials and components to construct a fuel cell module, including nickel and stainless steel which are critical to our manufacturing process. We also rely on third-party suppliers for the balance-of-plant components in our products. Suppliers must undergo a qualification process, which takes four to twelve months. We continually evaluate new suppliers and we are currently qualifying several new suppliers. There are a limited number of suppliers for some of the key components of products. A supplier’s failure to develop and supply components in a timely manner, supply components that meet our quality, quantity or cost requirements, technical specifications, or our inability to obtain alternative sources of these components on a timely basis or on terms acceptable to us could harm our ability to manufacture our SureSource products. In addition, to the extent the processes that our suppliers use to manufacture components are proprietary; we may be unable to obtain comparable components from alternative suppliers.
We do not know whether we will be able to maintain long-term supply relationships with our critical suppliers, or secure new long-term supply relationships, or whether such relationships will be on terms that will allow us to achieve our objectives. Our business prospects, results of operations and financial condition could be harmed if we fail to secure long-term relationships with entities that will supply the required components for our SureSource products.
43
We depend on our intellectual property, and our failure to protect that intellectual property could adversely affect our future growth and success.
Failure to protect our existing intellectual property rights may result in the loss of our exclusivity or the right to use our technologies. If we do not adequately ensure our freedom to use certain technology, we may have to pay others for rights to use their intellectual property, pay damages for infringement or misappropriation, or be enjoined from using such intellectual property. We rely on patent, trade secret, trademark and copyright law to protect our intellectual property. In addition, we have licensed our carbonate fuel cell manufacturing intellectual property to POSCO Energy, and we depend on POSCO Energy to also protect our intellectual property rights as licensed. As of October 31, 2016, the Company, excluding its subsidiaries, had 90 current U.S. patents and 88 international patents covering our fuel cell technology. The U.S. patents have an average remaining life of approximately 9.9 years. Our subsidiary, Versa Power Systems, Inc., as of October 31, 2016 has 33 current U.S. patents and 70 international patents covering their SOFC technology, with an average remaining U.S. patent life of approximately 7.3 years. In addition, our subsidiary, FuelCell Energy Solutions, GmbH, has a license to use 2 current U.S. patents and 27 international patents for carbonate fuel cell technology licensed from Fraunhofer IKTS.
Some of our intellectual property is not covered by any patent or patent application and includes trade secrets and other know-how that is not able to be patented, particularly as it relates to our manufacturing processes and engineering design. In addition, some of our intellectual property includes technologies and processes that may be similar to the patented technologies and processes of third parties. If we are found to be infringing third-party patents, we do not know whether we will be able to obtain licenses to use such patents on acceptable terms, if at all. Our patent position is subject to complex factual and legal issues that may give rise to uncertainty as to the validity, scope, and enforceability of a particular patent.
We cannot assure you that any of the U.S. or international patents owned by us or other patents that third parties license to us will not be invalidated, circumvented, challenged, rendered unenforceable or licensed to others, or any of our pending or future patent applications will be issued with the breadth of claim coverage sought by us, if issued at all. In addition, effective patent, trademark, copyright and trade secret protection may be unavailable, limited or not applied for in certain foreign countries.
We also seek to protect our proprietary intellectual property, including intellectual property that may not be patented or able to be patented, in part by confidentiality agreements and, if applicable, inventors’ rights agreements with our subcontractors, vendors, suppliers, consultants, strategic partners and employees. We cannot assure you that these agreements will not be breached, that we will have adequate remedies for any breach or that such persons or institutions will not assert rights to intellectual property arising out of these relationships. Certain of our intellectual property have been licensed to us on a non-exclusive basis from third parties that may also license such intellectual property to others, including our competitors. If our licensors are found to be infringing third-party patents, we do not know whether we will be able to obtain licenses to use the intellectual property licensed to us on acceptable terms, if at all.
If necessary or desirable, we may seek extensions of existing licenses or further licenses under the patents or other intellectual property rights of others. However, we can give no assurances that we will obtain such extensions or further licenses or that the terms of any offered licenses will be acceptable to us. The failure to obtain a license from a third party for intellectual property that we use at present could cause us to incur substantial liabilities, and to suspend the manufacture or shipment of products or our use of processes requiring the use of that intellectual property.
While we are not currently engaged in any intellectual property litigation, we could become subject to lawsuits in which it is alleged that we have infringed the intellectual property rights of others or commence lawsuits against others who we believe are infringing upon our rights. Our involvement in intellectual property litigation could result in significant expense to us, adversely affecting the development of sales of the challenged product or intellectual property and diverting the efforts of our technical and management personnel, whether or not that litigation is resolved in our favor.
Our future success will depend on our ability to attract and retain qualified management and technical personnel.
Our future success is substantially dependent on the continued services and on the performance of our executive officers and other key management, engineering, scientific, manufacturing and operating personnel, particularly Arthur Bottone, our Chief Executive Officer. The loss of the services of any executive officer, including Mr. Bottone, or other key management, engineering, scientific, manufacturing and operating personnel, could materially adversely affect our business. Our ability to achieve our commercialization plans will also depend on our ability to attract and retain additional qualified management and technical personnel. Recruiting personnel for the fuel cell industry is competitive. We do not know whether we will be able to attract or retain additional qualified management and technical personnel. Our inability to attract and retain additional qualified management and technical personnel, or the departure of key employees, could materially and adversely affect our development and commercialization plans and, therefore, our business prospects, results of operations and financial condition.
44
Our management may be unable to manage rapid growth effectively.
We may rapidly expand our facilities and manufacturing capabilities, accelerate the commercialization of our products and enter a period of rapid growth, which will place a significant strain on our senior management team and our financial and other resources. Any expansion may expose us to increased competition, greater overhead, marketing and support costs and other risks associated with the commercialization of a new product. We would need to obtain sufficient backlog in order to maintain the use of the expanded capacity. Our ability to manage rapid growth effectively will require us to continue to secure adequate sources of capital and financing, improve
our operations, to improve our financial and management information systems and to train, motivate and manage our employees. Difficulties in effectively managing issues presented by such a rapid expansion could harm our business prospects, results of operations and financial condition.
We may be affected by environmental and other governmental regulation.
We are subject to various federal, state and local laws and regulations relating to, among other things, land use, safe working conditions, handling and disposal of hazardous and potentially hazardous substances and emissions of pollutants into the atmosphere. In addition, it is possible that industry-specific laws and regulations will be adopted covering matters such as transmission scheduling, distribution, and the characteristics and quality of our products, including installation and servicing. These regulations could limit the growth in the use of carbonate fuel cell products, decrease the acceptance of fuel cells as a commercial product and increase our costs and, therefore, the price of our products. Accordingly, compliance with existing or future laws and regulations could have a material adverse effect on our business prospects, results of operations and financial condition.
Utility companies may resist the adoption of distributed generation and could impose customer fees or interconnection requirements on our customers that could make our products less desirable.
Investor-owned utilities may resist adoption of distributed generation fuel cell plants as the power plants are disruptive to the utility business model that primarily utilizes large central generation power plants and associated transmission and distribution. On-site distributed generation that is on the customer-side of the electric meter competes with the utility. Distributed generation on the utility-side of the meter generally has power output that is significantly less than central generation power plants and may be perceived by the utility as too small to materially impact its business, limiting its interest. Additionally, perceived technology risk may limit utility interest in stationary fuel cell power plants.
Utility companies commonly charge fees to larger, industrial customers for disconnecting from the electric grid or for having the capacity to use power from the electric grid for back up purposes. These fees could increase the cost to our customers of using our SureSource products and could make our products less desirable, thereby harming our business prospects, results of operations and financial condition.
Several U.S. states have created and adopted, or are in the process of creating, their own interconnection regulations covering both technical and financial requirements for interconnection to utility grids. Depending on the complexities of the requirements, installation of our systems may become burdened with additional costs that might have a negative impact on our ability to sell systems. The Institute of Electrical and Electronics Engineers has been working to create an interconnection standard addressing the technical requirements for distributed generation to interconnect to utility grids. Many parties are hopeful that this standard will be adopted nationally to help reduce the barriers to deployment of distributed generation such as fuel cells; however this standard may not be adopted nationally thereby limiting the commercial prospects and profitability of our fuel cell systems.
We could be liable for environmental damages resulting from our research, development or manufacturing operations.
Our business exposes us to the risk of harmful substances escaping into the environment, resulting in personal injury or loss of life, damage to or destruction of property, and natural resource damage. Depending on the nature of the claim, our current insurance policies may not adequately reimburse us for costs incurred in settling environmental damage claims, and in some instances, we may not be reimbursed at all. Our business is subject to numerous federal, state, and local laws and regulations that govern environmental protection and human health and safety. We believe that our businesses are operating in compliance in all material respects with applicable environmental laws, however these laws and regulations have changed frequently in the past and it is reasonable to expect additional and more stringent changes in the future.
Our operations may not comply with future laws and regulations and we may be required to make significant unanticipated capital and operating expenditures. If we fail to comply with applicable environmental laws and
regulations, governmental authorities may seek to impose fines and penalties on us or to revoke or deny the issuance or renewal of operating permits and private parties may seek damages from us. Under those circumstances, we might be required to curtail or cease operations, conduct site remediation or other corrective action, or pay substantial damage claims.
45
Our products use inherently dangerous, flammable fuels, operate at high temperatures and use cor
rosive carbonate material, each of which could subject our business to product liability claims.
Our business exposes us to potential product liability claims that are inherent in products that use hydrogen. Our products utilize fuels such as natural gas and convert these fuels internally to hydrogen that is used by our products to generate electricity. The fuels we use are combustible and may be toxic. In addition, our SureSource products operate at high temperatures and use corrosive carbonate material, which could expose us to potential liability claims. Although we have incorporated a robust design and redundant safety features in our power plants and have established comprehensive safety, maintenance, and training programs in place, follow third-party certification protocols, codes and standards, and do not store natural gas or hydrogen at our power plants, we cannot guarantee that there will not be accidents. Any accidents involving our products or other hydrogen-using products could materially impede widespread market acceptance and demand for our products. In addition, we might be held responsible for damages beyond the scope of our insurance coverage. We also cannot predict whether we will be able to maintain adequate insurance coverage on acceptable terms.
We are subject to risks inherent in international operations.
Since we market our products both inside and outside the U.S., our success depends in part on our ability to secure international customers and our ability to manufacture products that meet foreign regulatory and commercial requirements in target markets. Sales to customers located outside the U.S. accounts for a significant portion of our consolidated revenue. Sales to customers in South Korea represent the majority of our international sales. We have limited experience developing and manufacturing our products to comply with the commercial and legal requirements of international markets. In addition, we are subject to tariff regulations and requirements for export licenses, particularly with respect to the export of some of our technologies. We face numerous challenges in our international expansion, including unexpected changes in regulatory requirements, potential conflicts or disputes that countries may have to deal with, fluctuations in currency exchange rates, longer accounts receivable requirements and collections, difficulties in managing international operations, potentially adverse tax consequences, restrictions on repatriation of earnings and the burdens of complying with a wide variety of international laws. Any of these factors could adversely affect our results of operations and financial condition.
Although our reporting currency is the U.S. dollar, we conduct our business and incur costs in the local currency of most countries in which we operate. As a result, we are subject to currency translation and transaction risk. Joint ventures or other business arrangements with strategic partners outside of the United States have and are expected in the future to involve investments denominated in the local currency. Changes in exchange rates between foreign currencies and the U.S. dollar could affect our net sales and cost of sales and could result in exchange gains or losses. We cannot accurately predict the impact of future exchange rate fluctuations on our results of operations.
We could also expand our business into new and emerging markets, many of which have an uncertain regulatory environment relating to currency policy. Conducting business in such markets could cause our exposure to changes in exchange rates to increase, due to the relatively high volatility associated with emerging market currencies and potentially longer payment terms for our proceeds. Our ability to hedge foreign currency exposure is dependent on our credit profile with financial institutions that are willing and able to do business with us. Deterioration in our credit position or a significant tightening of the credit market conditions could limit our ability to hedge our foreign currency exposure; and therefore, result in exchange gains or losses.
Exports of certain of our products are subject to various export control regulations and may require a license or permission from the U.S. Department of State, the U.S. Department of Energy or other agencies.
As an exporter, we must comply with various laws and regulations relating to the export of products, services and technology from the U.S. and other countries having jurisdiction over our operations. We are subject to export control laws and regulations, including the International Traffic in Arms Regulation “ITAR”, the Export Administration Regulation “EAR”, and the Specially Designated Nationals and Blocked Persons List, which generally prohibit U.S. companies and their intermediaries from exporting certain products, importing materials or supplies, or otherwise doing business with restricted countries, businesses or individuals, and require companies to maintain certain policies and procedures to ensure compliance. We are also subject to the Foreign Corrupt Practices Act which prohibits improper payments to foreign governments and their officials by U.S. and other business entities. Under these laws and regulations, U.S. companies may be held liable for their actions and actions taken by their strategic or local partners or representatives. If we, or our intermediaries, fail to comply with the requirements of these laws and regulations, or similar laws of other countries, governmental authorities in the United States or elsewhere, as applicable, could seek to impose civil and/or criminal penalties, which could damage our reputation and have a material adverse effect on our business, financial condition and results of operations.
46
We are also subject to registration under the U.S. State Department’s Directorate of Defense Trade Controls (“DDTC”). Due to the nature of certain of our products and technology, we
must obtain licenses or authorizations from various U.S. Government agencies such as DDTC or DOE, before we are permitted to sell such products or license such technology outside of the U.S. We can give no assurance that we will continue to be successful i
n obtaining the necessary licenses or authorizations or that certain sales will not be prevented or delayed. Any significant impairment of our ability to sell products or license technology outside of the U.S. could negatively impact our results of operati
ons, financial condition or liquidity.
We depend on relationships with strategic partners, and the terms and enforceability of many of these relationships are not certain.
We have entered into relationships with strategic partners for design, product development, sale and service of our existing products, and products under development, some of which may not have been documented by a definitive agreement. The terms and conditions of many of these agreements allow for termination by the partners. Termination of any of these agreements could adversely affect our ability to design, develop and distribute these products to the marketplace. We cannot assure you that we will be able to successfully negotiate and execute definitive agreements with any of these partners, and failure to do so may effectively terminate the relevant relationship.
If we fail to maintain an effective system of internal controls, we may not be able to accurately report our financial results or prevent fraud, which could harm our brand and operating results.
Effective internal controls are necessary for us to provide reliable and accurate financial reports and effectively prevent fraud. We have devoted significant resources and time to comply with the internal control over financial reporting requirements of the Sarbanes-Oxley Act of 2002. In addition, Section 404 under the Sarbanes-Oxley Act of 2002 requires that we assess, and that our auditors attest to, the design and operating effectiveness of our controls over financial reporting. Our compliance with the annual internal control report requirement for each fiscal year will depend on the effectiveness of our financial reporting and data systems and controls. Inferior internal controls could cause investors to lose confidence in our reported financial information, which could have a negative effect on the trading price of our stock and our access to capital.
Our results of operations could vary as a result of methods, estimates and judgments we use in applying our accounting policies.
The methods, estimates and judgments we use in applying our accounting policies have a significant impact on our results of operations
. Such methods, estimates
and judgments are, by their nature, subject to substantial risks, uncertainties and assumptions, and factors may arise over time that could lead us to reevaluate our methods, estimates and judgments.
In future periods, management will continue to reevaluate its estimates for contract margins, service agreements, loss accruals, warranty, performance guarantees, liquidated damages and inventory valuation allowances. Changes in those estimates and judgments could significantly affect our results of operations and financial condition. We may also adopt changes required by the Financial Accounting Standards Board and the Securities and Exchange Commission.
Our stock price has been and could remain volatile.
The market price for our common stock has been and may continue to be volatile and subject to extreme price and volume fluctuations in response to market and other factors, including the following, some of which are beyond our control:
|
|
|
|
|
•
|
|
failure to meet commercialization milestones;
|
|
|
|
|
|
•
|
|
failure to win contracts through competitive bidding processes;
|
|
|
|
|
|
•
|
|
the loss of a major customer;
|
|
|
|
|
|
•
|
|
variations in our quarterly operating results from the expectations of securities analysts or investors;
|
|
|
|
|
|
•
|
|
downward revisions in securities analysts’ estimates or changes in general market conditions;
|
|
|
|
|
|
•
|
|
changes in the securities analysts that cover us or failure to regularly publish reports;
|
|
|
|
|
|
•
|
|
announcements of technological innovations or new products or services by us or our competitors;
|
|
|
|
|
|
•
|
|
announcements by us or our competitors of significant acquisitions, strategic partnerships, joint ventures or capital commitments;
|
|
|
|
|
|
•
|
|
additions or departures of key personnel;
|
|
|
|
|
|
•
|
|
investor perception of our industry or our prospects;
|
47
|
|
|
|
|
•
|
|
insider selling or buying;
|
|
|
|
|
|
•
|
|
demand for our common stock;
|
|
|
|
|
|
•
|
|
general technological or economic trends; and,
|
|
|
|
|
|
•
|
|
changes in United States or foreign political environment and the passage of laws, including, tax, environmental or other laws, affecting the product development business.
|
In the past, following periods of volatility in the market price of their stock, many companies have been the subject of securities class action litigation. If we became involved in securities class action litigation in the future, it could result in substantial costs and diversion of management’s attention and resources and could harm our stock price, business prospects, results of operations and financial condition.
Provisions of Delaware and Connecticut law and of our charter and by-laws and our outstanding securities may make a takeover more difficult.
Provisions in our certificate of incorporation and by-laws and in Delaware and Connecticut corporate law may make it difficult and expensive for a third-party to pursue a tender offer, change in control or takeover attempt that is opposed by our management and board of directors. In addition, certain provisions of our Series 1 Preferred Shares and our Series B preferred stock could make it more difficult or more expensive for a third party to acquire us. Public stockholders who might desire to participate in such a transaction may not have an opportunity to do so. These anti-takeover provisions could substantially impede the ability of public stockholders to benefit from a change in control or change in our management and board of directors.
Our amended and restated bylaws provide that the Court of Chancery of the State of Delaware is the exclusive forum for substantially all disputes between us and our stockholders, which could limit our stockholders’ ability to obtain a judicial forum deemed favorable by the stockholder for disputes with us or our directors, officers or employees.
Our amended and restated bylaws provide that the Court of Chancery of the State of Delaware is the exclusive forum for any derivative action or proceeding brought on our behalf, any action asserting a breach of fiduciary duty, any action asserting a claim against us arising pursuant to the Delaware General Corporation Law, our certificate of incorporation or our amended and restated bylaws, any action to interpret, apply, enforce, or determine the validity of our amended and restated certificate of incorporation or restated bylaws, or any action asserting a claim against us that is governed by the internal affairs doctrine. The choice of forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that the stockholder finds favorable for disputes against us or our directors, officers or other employees, which may discourage such lawsuits against us and our directors, officers and other employees. Alternatively, if a court were to find the choice of forum provision contained in our restated bylaws to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions, which could adversely affect our business and financial condition.
The implementation of our business plan and strategy will require additional capital.
The implementation of our business plan and strategy requires additional capital. If we are unable to raise additional capital in the amounts required, or at all, we will not be able to successfully implement our business plan and strategy. There can be no guarantee that we will be able to raise such additional capital at the times required or in the amounts required for the implementation of our business and strategy. In addition, the recent change to a more capital-intensive business model increases the risks of our being able to successfully implement our plans, if we do not raise additional capital in the amounts required. If we are unable to raise additional capital, our business, operations and prospects could be materially and adversely affected.
We will need to raise additional capital, and such capital may not be available on acceptable terms, if at all. If we do raise additional capital utilizing equity, existing stockholders will suffer dilution. If we do not raise additional capital, our business could fail or be materially and adversely affected.
We will need to raise additional funds in debt and equity financings, and these funds may not be available to us when we need them or on acceptable terms, if at all. Such additional financings could be significant. If we raise additional funds through further issuances of our common stock, or securities convertible or exchangeable into shares of our common stock, into the public market, including shares of our common stock issued upon exercise of options, you could suffer significant dilution, and any new equity securities we issue could have rights, preferences and privileges superior to those of our then-existing capital stock. Any debt financing secured by us in the future could involve restrictive covenants relating to our capital raising activities and other financial and operational matters, which may make it more difficult for us to obtain additional capital and to pursue business opportunities. If we cannot raise
48
additional funds when we need them, our business and prospects could fail or be materially and adversely affected. In addition, if additional fun
ds are not secured in the future, we will have to modify, reduce, defer or eliminate parts of our present and anticipated future projects.
Future sales of substantial amounts of our common stock could affect the market price of our common stock.
Future sales of substantial amounts of our common stock, or securities convertible or exchangeable into shares of our common stock, into the public market, including shares of our common stock issued upon exercise of options, or perceptions that those sales could occur, could adversely affect the prevailing market price of our common stock and our ability to raise capital in the future.
The rights of the Series 1 preferred shares and Series B preferred stock could negatively impact our cash flows and could dilute the ownership interest of our stockholders.
The terms of the Series 1 preferred shares issued by FCE FuelCell Energy, Ltd. (“FCE Ltd.”), our wholly-owned, indirect subsidiary, provide rights to the holder, Enbridge Inc. (“Enbridge”), which could negatively impact us.
The provisions of the Series 1 Preferred Shares require that FCE Ltd. make annual payments totaling Cdn. $1,250,000, including (i) annual dividend payments of Cdn. $500,000 and (ii) annual return of capital payments of Cdn. $750,000. These payments will end on December 31, 2020. Additional dividends accrue on cumulative unpaid dividends at a 1.25% quarterly rate, compounded quarterly, until payment thereof. On December 31, 2020 the amount of all accrued and unpaid dividends on the Series 1 Preferred Shares of Cdn. $21.1 million and the balance of the principal redemption price of Cdn. $4.4 million shall be paid to the holders of the Series 1 Preferred Shares. FCE Ltd. has the option of making dividend payments in the form of common stock or cash under the Series 1 Preferred Shares provisions.
We are also required to issue common stock to the holder of the Series 1 preferred shares if and when the holder exercises its conversion rights. The number of shares of common stock that we may issue upon conversion could be significant and dilutive to our existing stockholders. For example, assuming the holder of the Series 1 preferred shares exercises its conversion rights after July 31, 2020 and assuming our common stock price is $3.35 (our common stock closing price on October 31, 2016), and an exchange rate of U.S. $1.00 to Cdn. $1.34 at the time of conversion, we would be required to issue approximately 1,042,000 shares of our common stock.
The terms of the Series B preferred stock also provide rights to their holders that could negatively impact us. Holders of the Series B preferred stock are entitled to receive cumulative dividends at the rate of $50 per share per year, payable either in cash or in shares of our common stock. To the extent the dividend is paid in shares, additional issuances could be dilutive to our existing stockholders and the sale of those shares could have a negative impact on the price of our common stock. A share of our Series B preferred stock, after giving effect to the December 3, 2015 reverse stock split may be converted at any time, at the option of the holder, into 7.0922 shares of our common stock (which is equivalent to an initial conversion price of $141 per share), plus cash in lieu of fractional shares. Furthermore, the conversion rate applicable to the Series B preferred stock is subject to additional adjustment upon the occurrence of certain events.
49