Rupert Resources (“Rupert” or “The Company”) is pleased to
report drilling from its 2022-23 exploration program at its
multi-million ounce Ikkari gold discovery at the 100% owned Rupert
Lapland Project in Northern Finland.
This press release features multimedia. View
the full release here:
https://www.businesswire.com/news/home/20230523005660/en/
Figure 1. Location of new drilling at
Ikkari on plan map (Graphic: Business Wire)
In November 2022, the company published a mineral resource
estimate (“MRE”) and preliminary economic assessment (“PEA”) for
the project demonstrating the potential for a high margin, low impact mine with a life of over 20
years (see November 28, 2022 press release and footnotes
1&2).
Highlights from today’s published results (figure 1)
include:
Resource Infill
- Hole #123019 – 3.1 grams per tonne
gold (“g/t Au”) over 145.7m from 36.0m (31m vertical)
and 2.9g/t Au over 28m including 43g/t Au over 1m from 302m (265m
vertical) on a western section of the deposit. This further defines high grade mineralisation from
surface in a part of the deposit currently classified as
Inferred Resources and with lower estimated grade than the new
intercept (figures 2 and 3).
- Hole #123040 – 6.5g/t Au over 22m from
225m including 10.2g/t Au over 11m from 227m in the
eastern portion of the PEA open pit.
- Hole #123042 – 3.9g/t Au over 96m from
146m including selected sub intervals of 5.8g/t Au over 17m from
168m and 9.1g/t Au over 18m from 194m also in the
eastern portion of the PEA open pit.
Extensions
- Hole #123026 – 1.3g/t Au over 88.7m
from 487.3m (429m vertical) including 3.1g/t Au over
13.0m from 495m and 2.7g/t Au over 7.0m from 521m (figure 2) at
depth in the west of the deposit. The hole confirms the interpreted
plunge direction in the west of Ikkari and provides further drill
targets to the west of Ikkari at depth.
- Hole #123030 – 3.2g/t Au over 44m from
534m at depth (476m vertical) including 8.9g/t Au over
7m from 552m. This intercept demonstrates potential for the expansion of higher-grade resources at
depth in the Ikkari deposit below the current limits of
the Indicated Resource.
- Hole #123032 – 2.5g/t Au over 28m from 617m at depth (508m
vertical), below the limits of the
Indicated Resource, including 19.3g/t Au over 1m from
621m and 23.4g/t Au over 1m from 641m extending the high-grades in
the centre of the deposit to depth.
James Withall, CEO of Rupert Resources commented “We have
received more positive results from the winter 2022/23 drill
programme that demonstrate the exceptional continuity of the Ikkari
deposit, potential for grade uplift in the core of Ikkari and
extensions at depth in the west in previously untested areas. We
have a significant number of results pending from drilling
undertaken in recent months that has been focussed on extensions at
Ikkari and targets with satellite potential. Our business model in
its simplest form, is to continue finding low cost ounces whilst
advancing engineering and permitting to de-risk and optimise the
critical mass of high-margin resources we have already defined at
Ikkari in the November 2022 PEA.”
2022-2023 exploration
program
The 2022/2023 work program commenced in August 2022 with over
52,000m completed by the end of April 2023. The 30,000m allocated
to Ikkari infill and project drilling has been completed so that an
update to the current resource can be commenced once all assays are
received. Programs to test extensions at Ikkari as well as
potential satellites and new regional targets across Rupert’s
634km2 land position were undertaken in the latter two months of
the winter drilling season (March and April) and results are
pending.
The infill holes being completed target remaining areas of
Inferred Resources within the Indicated Resource outline, they
continue to upgrade the geological confidence and the continuity of
mineralisation within the deposit. Holes #123019, #123023 and
#123024, all delivered very continuous robust mineralised
intercepts in the western portions typical of the Ikkari deposit
and #123019 delivered grade in excess of those previously estimated
for this part of the deposit. Holes #123040 and #123042 defined the
northern contact to the mineralisation, increasing resource
confidence in this area and confirmed the continuity of discrete
high grade zones within the wider mineralised domain. This drilling
programme aims to convert all the Inferred Resources above 500m
vertical to the Indicated Resource category for inclusion in the
PFS study and provide greater confidence and resolution for mining
engineering and trade-off studies in the PFS.
The extension drilling programme was designed to increase the
Indicated category resources beyond the current limits at depth and
demonstrate the open nature of the Ikkari deposit by confirming the
interpreted western plunge to the mineralisation at depth. Hole
#123026 intercepted several zones near surface but also 1.3g/t Au
over 88.7m from 487.3m. The hole also had higher grade subintervals
and is located 150m below hole #123003 (74.1g/t Au over 6m – see
press release March 21, 2023). Furthermore, hole #123026 represents
a 70m down-plunge step-out from hole 122031 (2.8g/t Au over 30m
from 471m - see press release dated May 11, 2022) and which was the
westernmost intercept, at depth, included in the November 2022 MRE.
Hole #123025 intercepted 2.4g/t Au over 20m from 558m successfully
targeting the same plunging mineralisation trend which remains open
to the west and at depth. The extension programme is also
demonstrating more frequent higher grade intercepts at depth in the
centre of the deposit as we increase the metres allocated to
drilling below 450m vertical. As well as the intercepts highlighted
in hole #123032, hole #123031 intersected 4.1g/t Au over 21m from
571m and 41.4g/t Au over 1m from 686m. Further holes have been
drilled as part of the extension programme and assays remain
pending.
Resource update
On receipt of all the assays for the drilling programmes
discussed in the release, work will commence on an updated resource
with a target completion in early calendar year Q4 2023.
Figures
& tables
Figures and tables featured in the Appendix at end of release
include:
- Figure 1. Location of new drilling at Ikkari on plan map
- Figure 2. Long section showing location of the new extension
and selected infill drilling at Ikkari
- Figure 3. Cross section showing location and intercept of
123019 at Ikkari
- Table 1. Collar locations of new drill holes at Ikkari
- Table 2. New Intercepts from drilling at Ikkari
Geological
interpretation
Ikkari was discovered using systematic regional exploration that
initially focused on geochemical sampling of the bedrock/till
interface through glacial till deposits of 5m to 40m thickness. No
outcrop is present, and topography is dominated by low-lying swamp
areas.
The Ikkari deposit occurs within rocks that have been regionally
mapped as 2.05-2.15 billion years (“Ga”) old Savukoski group
greenschist-metamorphosed mafic-ultramafic volcanic rocks, part of
the Central Lapland Greenstone Belt (“CLGB”). Gold mineralisation
is largely confined to the structurally modified unconformity at a
significant domain boundary. Younger sedimentary lithologies are
complexly interleaved, with intensely altered ultramafic rocks, and
the mineralized zone is bounded to the north by a steeply N-dipping
cataclastic zone. Within the mineralised zone lithologies,
alteration and structure appear to be sub-vertical in contrast to
wider Area 1 where lithologies generally dipping at a moderated
angle to the north.
The main mineralized zone is strongly altered and characterised
by intense veining and foliation that pervasively overprints
original textures. An early phase of finely laminated grey
ankerite/dolomite veins is overprinted by stockwork-like irregular
siderite ± quartz ± chlorite ± sulphide veins. These vein arrays
are often deformed with shear-related boudinage and in situ
brecciation. Magnetite and/or haematite are common, in association
with pyrite. Hydrothermal alteration commonly comprises
quartz-dolomite-chlorite-magnetite (±haematite). Gold is hosted by
disseminated and vein-related pyrite. Multi-phase breccias are well
developed within the mineralised zone, with early silicified
cataclastic phases overprinted by late, carbonate- iron-oxide-
rich, hydrothermal breccias which display a subvertical control.
All breccias frequently host disseminated pyrite, and are often
associated with higher gold grades, particularly where magnetite or
haematite is prevalent. In the sedimentary lithologies, albite
alteration is intense and pervasive, with pyrite-magnetite (± gold)
hosted in veinlets in brittle fracture zones.
Review by Qualified Person, Quality Control and
Reports
Dr Charlotte Seabrook, MAIG, RPGeo., is the Qualified Person as
defined by National Instrument 43-101 responsible for the accuracy
of scientific and technical information in this news release.
The majority of samples are prepared by ALS Finland in Sodankylä
and assayed in ALS laboratories in Ireland, Romania or Sweden. A
minority of samples are prepared by Eurofins Laboratory in
Sodankylä and Fire Assay is carried out on site. A pulverised
sub-sample is then sent to ALS Ireland for multi-element analysis.
All samples are under watch from the drill site to the storage
facility. Samples at both laboratories are assayed using 50g fire
assay method with aqua regia digest and analysis by AAS for gold.
Over limit analysis (>100 ppm Au) is conducted using fire assay
and gravimetric finish. For multi-element assays, Ultra Trace Level
Method by 4-Acid digest (HF-HNO3-HClO4 acid digestion, HCl leach)
and a combination of ICP-MS and ICP-AES are used. The Company’s
QA/QC program includes the regular insertion of blanks and
standards into the sample shipments, as well as instructions for
duplication. Standards, blanks and duplicates are inserted at
appropriate intervals. Approximately five percent (5%) of the pulps
and rejects are sent for check assaying at a second laboratory.
Base of till samples are prepared in ALS Sodankylä by
dry-sieving method prep-41 and assayed for gold by fire assay with
ICP-AES finish. Multi-elements are assayed in ALS laboratories in
either of Ireland, Romania or Sweden by aqua regia with ICP-MS
finish. Rupert maintains a strict chain of custody procedure to
manage the handling of all samples. The Company’s QA/QC program
includes the regular insertion of blanks and standards into the
sample shipments, as well as instructions for duplication.
About Rupert Resources
Rupert Resources is a gold exploration and development company
listed on the TSX Exchange under the symbol “RUP.” The Company is
focused on making and advancing discoveries of scale and quality
with high margin and low environmental impact potential. The
Company’s principal focus is Ikkari, a new high quality gold
discovery in Northern Finland. Ikkari is part of the Company’s
“Rupert Lapland Project,” which also includes the Pahtavaara gold
mine, mill, and exploration permits (“Pahtavaara”). The Company
also holds a 20% carried participating interest in the Gold Centre
property located adjacent to the Red Lake mine in Ontario.
Neither the TSX Exchange nor its Regulation Services Provider
(as that term is defined in the policies of the TSX Exchange)
accepts responsibility for the adequacy or accuracy of this
release.
1Cautionary Note Regarding Forward Looking Statements
This press release contains statements which, other than
statements of historical fact constitute “forward-looking
statements” within the meaning of applicable securities laws,
including statements with respect to: results of exploration
activities and mineral resources. The words “may”, “would”,
“could”, “will”, “intend”, “plan”, “anticipate”, “believe”,
“estimate”, “expect” and similar expressions, as they relate to the
Company, are intended to identify such forward-looking statements.
Investors are cautioned that forward-looking statements are based
on the opinions, assumptions and estimates of management considered
reasonable at the date the statements are made, and are inherently
subject to a variety of risks and uncertainties and other known and
unknown factors that could cause actual events or results to differ
materially from those projected in the forward-looking statements.
These factors include the general risks of the mining industry, as
well as those risk factors discussed or referred to in the
Company's annual Management's Discussion and Analysis for the year
ended February 28, 2022 available here. Should one or more of these risks or
uncertainties materialize, or should assumptions underlying the
forward-looking statements prove incorrect, actual results may vary
materially from those described herein as intended, planned,
anticipated, believed, estimated or expected. Although the Company
has attempted to identify important factors that could cause actual
actions, events or results to differ materially from those
described in forward-looking information, there may be other
factors that cause actions, events or results not to be as
anticipated, estimated or intended. There can be no assurance that
such information will prove to be accurate as actual results and
future events could differ materially from those anticipated in
such statements. Any forward-looking statement speaks only as of
the date on which it is made and, except as may be required by
applicable securities laws, the Company does not intend, and does
not assume any obligation to update any forward-looking statement,
whether as a result of new information, future events or results or
otherwise.
2November 2022 Preliminary Economic Assessment and resource
estimate for the Ikkari and Pahtavaara Projects.
The Mineral Resource estimate included in the Preliminary
Economic Assessment (“Study” or “PEA” is reported according to the
clarification criteria set out in the Canadian Institute of Mining,
Metallurgy, and Petroleum Definition Standards for Mineral
Resources and Reserves (“CIM Definition Standards”). These
standards are internationally recognized and allow the reader to
compare the Mineral Resource with that reported for similar
project.
The results of the PEA will are set forth in an independent
technical report prepared in accordance with National Instrument
43-101 Standards of Disclosure for Mineral Projects (“NI 43-101”)
and which has been filed on SEDAR under the Company’s profile.
Readers are cautioned that the PEA is preliminary in nature and
is intended to provide an initial assessment of the project’s
economic potential and development options. The PEA mine schedule
and economic assessment includes numerous assumptions and is based
on both Indicated and Inferred Mineral Resources. Inferred
Resources are considered too speculative geologically to have the
economic considerations applied to them that would enable them to
be categorized as mineral reserves, and there is no certainty that
the PEA results will be realized. Mineral Resources are not Mineral
Reserves and do not have demonstrated economic viability.
Additional exploration will be required to potentially upgrade the
classification of the Inferred Mineral Resources to be considered
in future advanced studies.
The Mineral Resource estimate for the Project is reported in
accordance with National Instrument 43-101 (“NI 43-101”) and has
been estimated using the Canadian Institute of Mining, Metallurgy
and Petroleum (“CIM”) “Estimation of Mineral Resources and Mineral
Reserves Best Practice Guidelines”. The independent and qualified
person for the Mineral Resource Estimates as defined by NI43-101 is
Brian Wolfe, Principal Consultant, International Resource Solutions
Pty Ltd. These are mineral resources not mineral reserves as they
do not have demonstrated economic viability. Results are presented
in situ. Ounce (troy) = metric tonnes x grade / 31.103475.
Calculations used metric units (meters, tonnes, g/t). Any
discrepancies in the totals are due to rounding effects.
The effective date of the 2022 Mineral Resource Estimate for
Ikkari is 28 November 2022. The Mineral Resource Estimate at Ikkari
is calculated using the multiple indicator kriging (MIK) method and
is reported both within a designed open pit and as a potential
underground operation outside that. The Mineral Resource Estimate
at Ikkari is reported using a cutoff grade of 0.5g/t Au for
mineralisation potentially mineable by open pit methods and 1.0g/t
Au for mineralisation potentially extractable by underground
methods. The potential open pit mine and cut off-grade is
calculated using a gold price at $1650 per ounce, 5% mining
dilution, 95% Au recovery. Open pit mining costs at $2.5/t, process
costs at $11.3/t, other costs (including co-disposal, water and
closure) at $4.0/t and G&A, including royalties and refining at
$3.2/t. The calculated cutoff grade is rounded up to 0.5g/t for
reporting. The underground cutoff grade is calculated at
underground mining cost $21.8/t and underground mining dilution at
8% based on sub level caving. The calculated underground cutoff
grade is rounded up to 1.0g/t as the resource is not constrained
within mineable shapes.
The effective date of the 2022 Mineral Resource Estimate for
Pahtavaara is 28 November 2022 and the is calculated using the
multiple indicator kriging (MIK) method. The Mineral Resource
Estimate is reported both within a designed open pit and as a
potential underground operation outside that. The Mineral Resource
Estimate at Pahtavaara is reported using a cutoff grade of 0.5g/t
Au for mineralisation potentially mineable by open pit methods and
1.5g/t Au for mineralisation potentially extractable by underground
methods. The potential open pit mine and cut off-grades are
calculated using a gold price at $1650 per ounce, 20% mining
dilution, 89% Au recovery, and a mining cost at $2.6/t. process
cost at $10.2/t (concentration at Pahtavaara and transport to
Ikkari), other costs (including TSF costs and closure) at $1/t and
G&A including royalties and refining at $3.1/t. The calculated
cutoff grade is rounded up to 0.5g/t for reporting. The underground
cutoff grade is calculated at an underground mining cost $49.6/t
and underground mining dilution at 10% based on long hole open
stoping. The calculated underground cutoff grade is rounded up to
1.5g/t for reporting.
The effective date of the 2022 Mineral Resource Estimate for
Heinä Central is 28 November 2022 and is calculated using the
ordinary kriging (OK) method. The Mineral Resource Estimate is
reported both within an optimised open pit and as a potential
underground operation outside that. The Mineral Resource Estimate
is reported at a 0.5g/t Au cutoff grade for mineralisation
potentially mineable by open pit methods and at 1.2g/t Au for
mineralisation potentially extractable by underground methods. The
potential open pit mine and cutoff grade are calculated using a
gold price at $1650/oz, 5% mining dilution, 78% Au recovery. Open
pit mining costs at $2.5/t, process costs at $10.01/t (concentrate
production at Heinä and transport to Ikkari), other costs
(including TSF and closure) at $3.20/t and G&A including
royalties and refining at $1.66/t. The calculated open pit cutoff
grade is rounded up to 0.5g/t for reporting. The underground cutoff
grade is calculated at underground mining cost $30/t and
underground mining dilution of 5%. The calculated underground cut
of grade is rounded up to $1.2g/t for reporting. The Heinä Central
deposit also contains potentially recoverable copper. At the 0.5g/t
Au cut-off grade for mineralisation potentially mineable by open
pit methods Heinä Central also contains 12,000 tonnes of in situ
copper. At the 1.2g/t Au cut-off grade for mineralisation
potentially mineable by underground methods, Heinä Central also
contains 1,800 tonnes of in situ copper. No economic value is
applied to the copper content when designing the optimised open pit
or calculating the potential cut-off grade at Heinä Central.
APPENDIX
Table 1. Collar locations of new drill
holes
Hole ID
Prospect
Easting
Northing
Elevation
Azimuth
Dip
EOH (m)
123008
Ikkari
454144.3
7497225.1
223.8
155.7
-65.7
921.1
123014
Ikkari
454264.8
7497163.4
223.1
154.8
-68.4
612.0
123019
Ikkari
453867.5
7496869.4
223.7
152.1
-60.2
392.8
123020
Ikkari
454062.0
7497116.2
223.9
156.3
-66.2
639.5
123023
Ikkari
453899.8
7496895.5
223.6
155.3
-55.7
125.4*
123024
Ikkari
453856.1
7496990.1
224.3
156.4
-55.3
230.0
123025
Ikkari
453757.4
7497017.0
226.3
153.4
-55.8
647.2
123026
Ikkari
453723.4
7496995.4
226.5
154.0
-58.8
632.5
123028
Ikkari
454117.8
7497187.6
223.8
158.6
-64.6
832.9
123029
Ikkari
453723.6
7497089.6
227.6
154.8
-55.8
514.2
123030
Ikkari
453967.2
7497139.6
224.0
155.2
-58.1
720.0
123031
Ikkari
453854.4
7497208.6
224.7
155.0
-49.5
760.1
123032
Ikkari
453897.2
7497173.9
224.4
153.7
-55.0
694
123035
Ikkari
453826.8
7496662.7
222.8
335.0
-50.1
150
123040
Ikkari
454158.9
7497097.9
223.4
155.3
-50.5
252
123041
Ikkari
454201.6
7497006.9
222.8
152.3
-49.5
164.3
123042
Ikkari
454112.1
7497008.1
222.7
155.1
-57.1
401.3
*Hole ended in mineralisation
Table 2. New Intercepts from
Ikkari
Hole ID
From (m)
To (m)
Interval (m)
Grade Au (g/t)
123008
306.00
307.00
1.00
0.9
657.00
661.00
4.00
0.5
679.00
688.00
9.00
0.7
699.00
710.00
11.00
0.8
Including
706.00
709.00
3.00
1.7
724.00
725.00
1.00
0.5
747.00
759.00
12.00
1.0
771.00
778.00
7.00
0.5
783.00
784.00
1.00
1.3
789.00
790.00
1.00
1.4
123014
291.00
298.00
7.00
0.5
414.00
416.00
2.00
7.0
Including
414.00
415.00
1.00
13.5
469.00
487.00
18.00
0.6
Including
482.00
487.00
5.00
1.7
493.00
494.00
1.00
1.0
500.00
501.00
1.00
6.8
510.00
518.00
8.00
3.7
Including
511.00
512.00
1.00
22.2
541.00
542.00
1.00
0.6
561.00
562.00
1.00
0.4
123019
36.00
181.65
145.65
3.1
Including
53.00
68.00
15.00
6.7
also includes
67.00
68.00
1.00
26.2
and including
87.00
88.00
1.00
55.0
and
102.00
106.00
4.00
7.9
and
164.00
174.00
10.00
9.2
also includes
164.00
165.00
1.00
28.8
also includes
172.70
174.00
1.40
39.9
251.00
252.00
1.00
0.5
259.00
272.00
13.00
1.2
Including
265.00
266.90
1.90
4.3
302.00
330.00
28.00
2.9
Including
302.00
314.00
10.00
6.7
also includes
304.00
305.00
1.00
43.0
387.00
388.00
1.00
0.5
123020
251.00
255.00
4.00
0.5
278.00
280.00
2.00
0.6
298.00
301.00
3.00
2.2
Including
299.00
300.00
1.00
4.4
326.00
347.00
21.00
0.7
Including
326.00
327.75
1.75
2.0
and
343.00
345.00
2.00
2.0
400.00
401.00
1.00
0.5
415.00
416.00
1.00
2.0
423.00
424.00
1.00
2.4
432.00
433.00
1.00
3.9
476.00
477.00
1.00
2.7
483.00
484.00
1.00
2.4
495.00
496.00
1.00
7.3
515.00
516.00
1.00
0.5
549.00
550.00
1.00
0.7
614.00
616.00
2.00
0.8
123023
48.30
125.00
76.70
1.7**
Including
52.10
53.00
0.90
6.1
and
56.00
57.00
1.00
7.9
and
69.00
70.00
1.00
6.3
and
97.00
98.00
1.00
5.1
123024
132.00
216.00
84.00
1.5
Including
146.00
157.00
11.00
2.4
also includes
149.00
150.00
1.00
5.8
and including
179.00
196.00
17.00
2.5
also includes
183.00
184.00
1.00
5.3
and
186.00
187.00
1.00
7.4
and
194.00
195.00
1.00
6.7
229.00
230.00
1.00
0.5
123025
161.00
164.00
3.00
1.0
Including
161.00
162.00
1.00
1.9
179.00
185.00
6.00
0.5
191.00
193.00
2.00
0.8
202.00
203.00
1.00
0.4
208.00
209.00
1.00
0.5
214.00
215.00
1.00
0.4
229.00
247.00
18.00
0.5
Including
241.00
243.00
2.00
1.4
259.00
260.00
1.00
0.5
266.00
267.00
1.00
0.5
273.00
285.00
12.00
1.4
Including
282.00
284.00
2.00
3.5
301.00
302.00
1.00
0.4
304.00
309.00
5.00
0.5
323.00
327.00
4.00
0.9
Including
323.00
324.00
1.00
2.5
337.00
356.00
19.00
0.9
Including
337.00
338.00
1.00
4.6
and
352.00
355.00
3.00
2.4
367.00
369.00
2.00
0.6
378.00
379.00
1.00
3.0
391.00
394.00
3.00
0.9
439.00
440.00
1.00
0.5
469.00
483.00
14.00
0.6
Including
479.00
480.00
1.00
3.6
498.00
517.00
19.00
0.6
Including
498.00
501.00
3.00
1.5
525.00
531.00
6.00
0.5
Including
530.00
531.00
1.00
1.9
558.00
578.00
20.00
2.4
Including
558.00
559.00
1.00
24.0
123026
143.00
190.00
47.00
1.5
Including
168.00
176.00
8.00
3.9
Also Includes
168.00
169.00
1.00
9.7
and including
175.00
176.00
1.00
9.4
206.00
208.00
2.00
0.6
217.00
218.00
1.00
0.7
220.00
221.00
1.00
0.4
253.00
288.00
35.00
1.4
Including
278.00
286.00
8.00
3.0
Also Includes
280.00
281.00
1.00
5.8
and including
284.00
286.00
2.00
5.0
294.00
295.00
1.00
1.6
303.00
307.00
4.00
1.1
317.00
360.00
43.00
0.5
Including
317.00
323.00
6.00
1.0
and
336.00
338.00
2.00
1.3
and
350.00
352.00
2.00
1.4
378.00
389.00
11.00
0.6
Including
383.00
384.00
1.00
2.9
417.00
418.00
1.00
0.8
435.00
436.00
1.00
0.6
465.00
466.00
1.00
3.4
487.30
576.00
88.70
1.3
Including
495.00
508.00
13.00
3.1
Also Includes
495.00
496.00
1.00
15.0
Also Includes
506.00
507.00
1.00
15.8
and Including
521.00
528.00
7.00
2.7
Also Includes
526.00
528.00
2.00
4.9
123028
153.00
154.00
1.00
0.7
360.00
362.00
2.00
1.3
642.00
646.00
1.00
0.4
Including
642.00
643.00
1.00
1.1
650.00
658.00
8.00
0.4
Including
653.00
654.00
1.00
1.8
668.00
688.00
20.00
0.5
Including
684.00
685.00
1.00
3.0
695.00
709.00
18.00
0.9
Including
697.00
698.00
1.00
2.5
and
705.00
707.00
2.00
2.3
and
712.00
713.00
1.00
3.8
738.00
739.00
1.00
0.6
752.00
753.00
1.00
0.5
123029
232.00
260.00
28.00
0.9
Including
237.00
238.00
1.00
4.4
267.00
291.00
24.00
0.9
Including
282.00
283.00
1.00
9.5
300.00
339.00
39.00
0.8
Including
307.00
308.00
1.00
4.0
and
338.00
339.00
1.00
3.4
363.00
372.00
9.00
1.3
Including
367.00
369.00
2.00
3.9
378.00
398.00
20.00
0.5
405.00
406.00
1.00
0.5
414.00
421.00
7.00
3.7
Including
418.00
419.00
1.00
13.4
454.00
459.00
5.00
0.8
465.00
466.00
1.00
0.6
478.00
479.00
1.00
1.0
123030
299.00
300.00
1.00
0.7
311.00
312.00
1.00
0.9
320.00
321.00
1.00
1.5
424.00
425.00
1.00
0.6
426.00
427.00
1.00
0.6
466.00
482.00
16.00
1.0
Including
471.00
474.00
3.00
3.7
509.00
513.00
4.00
1.2
520.00
521.00
1.00
3.9
534.00
578.00
44.00
3.2
Including
541.00
542.00
1.00
25.8
and
552.00
559.00
7.00
8.9
Also Includes
552.00
553.00
1.00
22.7
589.00
598.00
9.00
1.2
Including
596.00
598.00
2.00
3.1
604.00
616.00
12.00
0.5
Including
607.00
609.00
2.00
1.9
630.00
644.00
14.00
0.7
Including
636.00
637.00
1.00
2.9
123031
276.00
283.00
7.00
0.4
343.00
351.00
8.00
1.1
360.00
362.00
2.00
0.5
373.00
408.00
35.00
0.7
Including
384.00
392.00
8.00
1.6
416.00
418.00
2.00
0.6
430.00
431.00
1.00
0.5
493.00
494.00
1.00
2.4
501.00
502.00
1.00
0.8
539.00
547.00
8.00
0.7
Including
546.00
547.00
1.00
3.1
553.00
564.00
11.00
1.6
Including
561.00
562.00
1.00
5.0
571.00
592.00
21.00
4.1
Including
581.00
582.00
1.00
50.6
608.00
609.00
1.00
6.0
628.00
631.00
3.00
1.3
Including
628.00
629.00
1.00
3.1
644.00
645.00
1.00
0.6
649.00
650.00
1.00
0.4
658.00
659.00
1.00
0.8
668.00
675.00
7.00
0.7
680.00
680.50
0.50
1.2
686.00
687.00
1.00
41.4
704.00
712.40
8.40
0.9
Including
707.00
708.00
1.00
2.8
686.00
687.00
1.00
41.4
123032
252.00
259.00
7.00
0.4
Including
252.00
254.00
2.00
1.1
311.00
312.00
1.00
1.0
315.00
316.00
1.00
0.4
322.00
326.00
4.00
0.7
342.00
374.00
32.00
1.7
Including
350.00
360.00
10.00
3.8
Also Includes
359.00
360.00
1.00
21.5
388.00
389.00
1.00
0.6
402.00
403.00
1.00
2.9
415.00
416.00
1.00
7.0
486.00
487.00
1.00
0.6
533.00
538.00
5.00
1.0
544.75
545.50
0.75
3.4
565.00
566.00
1.00
3.5
586.00
587.00
1.00
0.7
598.00
599.00
1.00
0.8
617.00
642.00
25.00
2.8
Including
621.00
622.00
1.00
19.3
and
641.00
642.00
1.00
23.4
658.00
659.00
1.00
1.3
670.00
671.00
1.00
0.5
673.00
674.00
1.00
0.6
686.00
689.00
3.00
0.7
123035
29.00
30.00
1.00
0.6
35.20
51.20
16.00
0.9*
* includes 5.50m core loss
Including
35.20
39.80
4.60
2.0
59.60
72.60
13.00
2.6*
* includes 5.80m core loss
Including
59.60
62.00
2.40
6.9
and
67.60
68.40
0.80
9.8
80.60
86.90
6.30
2.0*
* includes 4.40m core loss
Including
83.60
84.80
1.20
9.3
92.60
93.00
0.40
0.8
123040
158.00
159.00
1.00
0.5
181.00
182.00
1.00
0.4
206.00
209.00
3.00
3.8
Including
206.00
207.00
1.00
7.1
225.00
247.00
22.00
6.5
Including
227.00
238.00
11.00
10.2
123041
79.00
80.00
1.00
0.7
94.00
95.00
1.00
0.7
144.00
162.00
18.00
1.7
Including
152.00
158.00
6.00
3.4
123042
84.00
85.00
1.00
0.9
97.00
98.00
1.00
0.4
110.00
111.00
1.00
0.8
136.00
138.00
2.00
4.2
Including
137.00
138.00
1.00
7.0
146.00
242.00
96.00
3.9
Including
155.00
156.50
1.50
11.5
and
168.00
185.00
17.00
5.8
Also Includes
168.00
173.00
5.00
9.0
and
184.00
185.00
1.00
15.0
and Including
194.00
212.00
18.00
9.1
Also Includes
210.00
211.00
1.00
27.3
and Including
228.00
323.00
4.00
8.3
254.00
299.00
45.00
0.9
Including
264.00
277.00
13.00
1.7
and
292.00
295.00
3.00
2.9
327.00
341.00
14.00
0.7
Including
330.00
335.00
5.00
1.3
386.00
387.00
1.00
0.7
No upper cut-off grade has been applied. 0.4g/t Au lower cut-off
applied, a maximum of 5m internal dilution has been allowed when
calculating intercepts. All intervals over the cut-off grade are
presented here. Italic intervals indicate intercepts including
within the wider intercept. Unless specified, true widths cannot be
accurately determined from the information available. Bold
intervals referred to in text of release. Refer to
https://rupertresources.com/news/ for details of previously
released drilling intercepts. EOH– End of Hole. NSI – No
significant intercept
*All intervals of core loss assigned 0g/t
**Hole ends in mineralisation
View source
version on businesswire.com: https://www.businesswire.com/news/home/20230523005660/en/
For further information:
James Withall Chief Executive Officer
jwithall@rupertresources.com
Thomas Credland Head of Corporate Development
tcredland@rupertresources.com
Rupert Resources Ltd 82 Richmond Street East, Suite
203, Toronto, Ontario M5C 1P1 Tel: +1 416-304-9004 Web:
http://rupertresources.com/
Rupert Resources (TSX:RUP)
Historical Stock Chart
Von Nov 2024 bis Dez 2024
Rupert Resources (TSX:RUP)
Historical Stock Chart
Von Dez 2023 bis Dez 2024
