PNG Gold Corporation Announces Results From Initial Metallurgical Test Work; 95% Gold and 86% Silver Recoveries Indicated Wit...
22 Februar 2012 - 1:30PM
Marketwired Canada
NOT FOR DISTRIBUTION IN THE UNITED STATES OR TO U.S. NEWSWIRE SERVICES
PNG Gold Corporation (TSX VENTURE:PGK) ("PNG Gold" or the "Company") has
received results of preliminary metallurgical test work on its Imwauna gold
project on Normanby Island, Milne Bay Province, eastern Papua New Guinea. The
test work was commissioned on PNG Gold's behalf by Lycopodium Minerals,
Brisbane, QLD at Metcon Laboratories of Sydney, NSW, a division of the global
ALS Group of testing laboratories.
Highlights of the test work are:
-- High 95% gold and 86% silver extraction with indications of improved
results with longer leach times and perhaps more controlled grinding.
-- Low reagent consumptions.
-- Very good correlation between head assay and leach test calculated heads
which is unusually good for gold (emphasis added) which tends to be
particulate and difficult to sample.
-- The results suggest fine rather than flake gold mineralization.
-- Higher than usual silver extraction levels with the rate of silver
dissolution also being faster than typically observed.
Metcon Laboratories ("Metcon") received thirty-two (32) mineralized drill core
samples from 16 holes completed in PNG Gold's 2011 diamond drilling program. The
core had previously been crushed for assay procedures at ALS in Townsville, QLD.
Samples contained between 3 and 15 g/t Au and 1 to 45 g/t Ag. All samples were
subjected to metallurgical LeachWell tests and assayed for total and sulphide
sulphur. Eleven (11) of the largest samples were also subjected to cyanide
leaching in bottle roll tests.
The sampled drill holes are located in the northern and central sections of the
Imwauna deposit extending along a vein strike length of 425 m. Samples are from
individual quartz veins ranging in thickness from 0.4 m to 2.9 m (core length)
and from near surface depths (e.g. IMH 187) to depths of approximately 160 m
vertically from surface in IMH 196. The sampled drill holes are shown on the
drill hole location map
http://www.pnggold.com/i/pdf/Imwauna-Exploration-Locations_metallurgical-testing.pdf
and summarized in Table 2 at the end of this release.
Metcon also noted that samples contain 0 to 1.3% S, indicating sulphide contents
from 0% up to 3%. There was no discernible correlation between the sulphide
content and gold extraction, suggesting the gold is free and not locked in
sulphides. Further tests on other drill holes are planned to confirm these
initial results.
Dick Whittington, President and CEO, stated, "These results highlight the
potential for excellent metallurgical recoveries from the Imwauna vein system.
The possibility of lower than normal reagent consumption is also very
gratifying. Additional work still has to be done but this is a promising start
to our ongoing metallurgical test work programme."
Methodology
Metcon Labs pulverized the samples to -300 microns and conducted bottle roll and
LeachWell tests on 11 samples and LeachWell tests only on the other 21 samples.
Following the leach tests, head assays were also done in order to give a
metallurgical balance and measure of the percentage of cyanide soluble gold.
Assays for total sulphur and sulphide sulphur were also carried out using the
Leco furnace technique. All of the sulphur appears to occur as sulphide sulphur.
LeachWell is an aggressive test which involves reacting a small sample (e.g. 100
g) with water and a LeachWell tablet (a proprietary reagent) followed by
tumbling for 1 to 2 hours. It is expected to overestimate potential recoveries.
Nevertheless, the more conservative bottle roll tests produced similar high
extraction rates for both gold and silver, with average recoveries just 4.1% and
6.9% lower, respectively. Comparative extraction rates are summarized in Table
1.
Table 1: Comparison of Leach Results
---------------------------------------------------------------------------
% Au leached % Au leached % Ag leached % Ag leached
Sample bottle roll LeachWell bottle roll LeachWell
---------------------------------------------------------------------------
94560 98.2 99.4 86.7 96.8
---------------------------------------------------------------------------
94570 96.6 98.4 92.1 85.2
---------------------------------------------------------------------------
94730 96.9 98.2 87.1 88.5
---------------------------------------------------------------------------
94733 94.5 98.9 82.7 93.4
---------------------------------------------------------------------------
94734 96.7 98.1 90.1 91.8
---------------------------------------------------------------------------
94973 83.4 99.3 90.5 93.7
---------------------------------------------------------------------------
94976 88.3 99.5 60.9 98.5
---------------------------------------------------------------------------
94982 94.3 99.3 83.3 94.8
---------------------------------------------------------------------------
95041 97.4 99.7 96.1 96.2
---------------------------------------------------------------------------
95061 98.0 99.5 90.8 94.0
---------------------------------------------------------------------------
95368 96.8 95.2 86.1 89.4
---------------------------------------------------------------------------
The bottle roll tests were conducted according to Metcon's standard format. The
sample was slurried at 40% solids and leaching carried out under pH 10.5 at a
solution-strength of 0.1% NaCn for a 24 hr period. Leach conditions were
monitored and controlled with the addition of more reagents if required to
maintain leaching conditions. Periodic liquor samples were also taken to
determine the rate of gold and silver dissolution and ultimately the total
extraction. Average reagent consumptions in the bottle roll tests were
approximately 1 kg/t for both lime and cyanide, relatively low by industry
standards. Metcon also commented that cyanide consumption could likely be
reduced with further optimization.
Core logging, sampling and assaying procedures
All holes drilled by PNG Gold are collared using HQ triple tube drill tools. A
few holes have been reduced to NQ size at depth in the hole in order to continue
the hole. Geotechnical measurements such as core recovery, fracturing and
veining, rock quality designations (RQD's), hardness and photographic logging
are performed systematically prior to sampling and assaying. The core is logged,
samples selected by PNG Gold geologists then systematically sawn in half at the
site. The one half core sample is numbered, sealed in a bag and delivered by PNG
Gold to its base in Alotau where the samples are palletized and placed in secure
storage prior shipment to ALS in Townsville, QLD. The other core half is
retained on the site.
Core samples are dried, crushed and pulverized to 85% passing through a 75
micron mesh. The pulps are assayed for gold and silver using a 50 g split, Fire
Assay (FA) and AA finish. Analyses were also carried out for the trace elements
As and Pb. Results are available on the company's website. Rejects and pulps are
stored at the lab for future reference.
Qualified Person
Mr. Colin McKenzie, P.Geo., and COO of PNG Gold Corporation, is a qualified
person in accordance with National Instrument 43-101 and has reviewed and
approved the technical information contained in this news release.
About the Imwauna Gold Deposit
The Imwauna exploration license - EL 1091 - is located on the north side of
Normanby Island approximately 80 km northeast of Alotau, the provincial capital
of Milne Bay Province, Papua New Guinea. Alotau is serviced by daily flights
from Port Moresby the national capital and scheduled coastal freighters. PNG
Gold maintains a logistics base in Alotau to supply the Normanby Island site.
The Imwauna prospect is an epithermal, low sulphidation quartz vein system
comprising two principal veins, the thicker, more continuous Main vein and the
East vein. The mineralized veins consist of finely crystalline quartz, white to
grey in colour and display typical epithermal textures such as vugs, dog tooth
crystals and fine, chalcedonic layering. Sulphides are rare to absent although
some deeper intersections contain a few per cent of fine pyrite. Vein margins
are often brecciated and re-sealed with silica.
Historic exploration drilling in 178 drill holes (see PNG Gold Corporation
Technical Report, November 30, 2010 on Sedar) has outlined a narrow zone of gold
mineralization over a strike length of at least 900 m to an average vertical
depth of about 100 m. Widths are usually 1 to 3 m in the Main vein but less in
the East vein. Recent drilling has confirmed the extension of the Imwauna vein
system to depths of 150 metres with high grade intercepts now evident at this
depth - see News Release dated February 9th, 2012 reporting 32 g/t over 1.4 m at
a depth of 150 metres. Drilling is ongoing and is designed to extend the deposit
to depth and obtain sufficient information to support a 43-101 resource
estimate, now scheduled for the second quarter 2012.
About PNG Gold Corporation
PNG Gold Corporation is an exploration company with an advanced stage drilling
program in Papua New Guinea. PNG Gold holds a 100% interest in the Imwauna and
Sehulea properties on Normanby Island, Milne Bay Province, Papua New Guinea, and
trades on the TSX Venture Exchange under the symbol PGK. PNG Gold's mission is
to become the premier exploration and development company in Papua New Guinea.
For further details, please visit the Company's website at www.pnggold.com.
ON BEHALF OF THE BOARD OF DIRECTORS
J.R.H. (Dick) Whittington, President & CEO
No regulatory authority has approved or disapproved the information contained in
this news release.
Forward-Looking Statements
Certain information set forth in this news release contains forward-looking
statements that involve substantial known and unknown risks and uncertainties.
These forward-looking statements relate to matters such as results of
exploration and development of the Normanby Property and completion of financing
and are subject to numerous risks and uncertainties, certain of which are beyond
the control of PNG Gold, including, but not limited to, the impact of general
economic conditions, industry conditions, financial market conditions,
dependence upon regulatory and shareholder approvals, and the uncertainty of
completing intended financing and obtaining additional financing. Exploration of
mineral properties is subject to the inherent risk that it may not result in
commercial discovery. Readers are cautioned that the assumptions used in the
preparation of forward-looking statements, although considered reasonable at the
time of preparation, may prove to be incorrect and, as such, undue reliance
should not be placed on forward-looking statements. PNG Gold expressly disclaims
any obligation to update forward-looking statements contained herein except as
required by applicable law.
Table 2: Samples used in Metallurgical Tests
---------------------------------------------------------------------------
Vein
Hole Elev From To Length Au Ag
ID Easting Northing (m) Sample (m) (m) (m)(i) (g/t) (g/t)
---------------------------------------------------------------------------
IMH187 289075.0 8886926.5 485.6 94230 31.2 33.0 1.8 4.88 22.8
---------------------------------------------------------------------------
IMH188 289075.4 8887018.1 484.9 94266 112.9 113.3 0.4 4.37 9.1
---------------------------------------------------------------------------
IMH190 289044.4 8886953.6 495.4 94297 101.4 102.9 1.5 4.50 8.0
---------------------------------------------------------------------------
and 94306 120.7 121.4 0.7 10.50 14.4
---------------------------------------------------------------------------
IMH193 289047.9 8886996.8 492.1 94560 89.4 90.8 1.4 15.60 10.6
---------------------------------------------------------------------------
and 94570 103.1 104.7 1.6 3.14 2.2
---------------------------------------------------------------------------
IMH194 289054.3 8886992.6 491.8 94730 133.6 134.8 1.2 3.89 7.9
---------------------------------------------------------------------------
and 94733 136.3 137.2 0.9 5.67 14.2
---------------------------------------------------------------------------
and 94734 137.2 138.0 0.8 6.04 10.1
---------------------------------------------------------------------------
IMH196 288989.4 8886899.1 494.1 94934 126.4 127.4 1.0 5.24 9.2
---------------------------------------------------------------------------
and 94973 179.2 180.2 1.0 8.50 12.5
---------------------------------------------------------------------------
and 94976 181.2 182.0 0.8 4.02 45.3
---------------------------------------------------------------------------
and 94982 187.0 188.0 1.0 3.15 1.5
---------------------------------------------------------------------------
IMH197 289000.6 8886926.9 509.1 95041 94.8 95.8 1.0 6.91 12.2
---------------------------------------------------------------------------
and 95061 120.8 121.8 1.0 6.45 6.5
---------------------------------------------------------------------------
IMH199 289021.1 8886866.3 493.3 95222 84.5 85.1 0.6 4.15 6.0
---------------------------------------------------------------------------
IMH200 289073.3 8887156.0 493.3 95368 139.0 140.0 1.0 3.50 2.0
---------------------------------------------------------------------------
IMH202 289008.5 8886817.7 514.2 95489 77.0 78.0 1.0 5.02 9.3
---------------------------------------------------------------------------
IMH203 289008.5 8886817.7 514.2 95572 81.3 82.3 1.0 4.09 10.7
---------------------------------------------------------------------------
and 95574 82.9 83.5 0.6 6.57 19.9
---------------------------------------------------------------------------
IMH204 288963.1 8886812.9 511.2 95629 138.0 138.9 0.9 11.9 10.8
---------------------------------------------------------------------------
and 95632 142.5 145.4 2.9 3.46 6.8
---------------------------------------------------------------------------
and 95634 147.0 148.3 1.3 4.16 4.1
---------------------------------------------------------------------------
IMH209 288966.2 8886833.1 540.3 95918 141.0 142.0 1.0 12.10 13.0
---------------------------------------------------------------------------
and 95922 150.0 151.5 1.5 15.25 14.0
---------------------------------------------------------------------------
IMH211 289087.3 8887028.5 476.5 95976 63.4 64.3 0.9 3.64 9.70
---------------------------------------------------------------------------
IMH213 288981.0 8886747.9 537.1 96062 65.7 66.1 0.4 4.15 3.2
---------------------------------------------------------------------------
IMH215 288981.9 8886747.6 537.0 96101 73.5 74.3 0.8 12.7 17.1
---------------------------------------------------------------------------
and 96102 74.3 75.1 0.8 8.75 12.5
---------------------------------------------------------------------------
and 96106 79.4 80.4 1.0 5.02 14.3
---------------------------------------------------------------------------
and 96110 83.5 84.0 0.5 13.45 36.0
---------------------------------------------------------------------------
and 96111 84.0 84.8 0.8 7.75 25.5
---------------------------------------------------------------------------
(i) vein lengths are core lengths and are not true thicknesses
PNG Gold Corporation (TSXV:PGK)
Historical Stock Chart
Von Mai 2024 bis Jun 2024
PNG Gold Corporation (TSXV:PGK)
Historical Stock Chart
Von Jun 2023 bis Jun 2024